Add support back for waiting for an EDL device to appear. This is useful
when paired with some automation scripts that introduces "arbitrary"
delays in the process of entering EDL mode.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The USB claim return code was printed to the console for debug purposes,
remove this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The nop was added to mitigate the fact that there's a rather long delay
in the response when sending out the first command. Increasing the write
timeout removes this problem and it's possible to just send the
configure as the first command without issues.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

On devices implementing a/b updates the xbl partiiton will be named
xbl_a and xbl_b, extend the match for finding the bootable partition to
support this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

It was assumed that we should send all the data following a "program"
request to the device, before sending a ZLP. But on SDM845 it's seen
that not sending a ZLP after each chunk sometimes causes the
communication to stall.

Given that the "program" request already carries the information about
how much data will be transferred there should be no issues with sending
additional ZLPs, so do this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

On some newer platforms the device ignore the configure request to
disable ZLP, causing the Firehose program request to stall, when the
device is waiting for a ZLP to end a transfer.

Mitigate this by circumventing the qcserial driver and drive the USB
traffic directly using USBFS. The tool will attempt to detach qcserial
from the device, in case it's already attached, so no changes are needed
in the kernel or system configuration.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Added qdl support for emmc storage on platforms with UFS support.  Use
option --s emmc or ufs as a argument to qdl command, if not specified
any option the default storage would be ufs

Tested-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Laxman <itsmelaxman91@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Moved the two functions to util.c to remove duplicate code.
The previous error handling in some of the implemenations was
incomplete as it caused qdl to crash.
While the variable errors was incremented we still tried to
return the regular result. Now returning 0/NULL in case of error.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The attributes size_in_KB, sparse and start_byte_hex
are not used and seem to be optional. Some program
xml files do not always contain them which then causes
qdl to crash. Simply removing the unused attributes
fixes this problem.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The sahara protocol specification defines the image field
for a read64 request as 8 bytes.
Use the correct type to represent this.

This will not change the behavior when building for 64-bit,
where the compiler already aligned the offset field correctly,
in order to satisfy natural alignment requirements.

However, when building for 32-bit, this change results in a
qdl that can flash a device successfully.

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Since it is by no means certain that the current tty is ttyUSB1,
do not assume it to be so.

Unfortunately we do not know the current tty in main().
It would be possible to refactor the code so that we could print
the current tty, but since the only consumer of that information
would be this error message, that refactoring seems unjustified.

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This assignment is superfluous, since the same assignment is performed
in the for loop's initializer.

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

printf uses PRIx64 modifier to print uint64_t.

This modifier has to be used outside of double-quotes.

Fixes build warnings on 32-bit systems, e.g. ARMv7.

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

printf uses z modifier to print size_t.

Also change d modifier to u, since size_t is unsigned.
(ssize_t is the signed version.)

Fixes build warning on 32-bit systems, e.g. ARMv7.

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Let the programmer search for files beyond the current folder. When --include is
used , the programmmer will first look for files in the specified folder, and it
will then fallback to looking at the current folder.

Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Fix the return value verification and add printf status message

Signed-off-by: Tanya Finkel <tfinkel@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

In the case that we find a "data" tag, but not a "program" or "ufs"
child node type might have been left unitialized. Fix this by
initializing type.

Also fix up the styling of the multiline blocks.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add UFS provisioning functionality using Firehose.

Signed-off-by: Kirill Kapranov <kkapra@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add a mention of command line parameter '--debug' in 'usage' printout

Signed-off-by: Kirill Kapranov <kkapra@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

we preserve the same args as before, however it should now be simpler to
add new options.

Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Each xmlNewDoc should have a matching xmlFreeDoc call in order to avoid
memory leaks.

Signed-off-by: Kirill Kapranov <kkapra@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Some program entries has num_partition_sectors=0 but still specifies a
file, don't truncate the size of the file in this case.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Follow the behavior of the other flash tools and skip partitions with no
filename, instead of filling them with zeros. This reduces the flash
time considerably for some set of xml files.

Also clean up firehose_program() as we no longer need to support calling
this function with an invalid fd.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

When the host propose a larger payload size than the device accepts the
device will respond with a NACK, containing the maximum payload size.
Similarily the ACK will contain the supported max if the host requests a
lower value than the device supports.

In both cases we pick the largest possible value and send a second
configure message to select this payload size.

Reported-by: Kirill Kapranov <c_kkapra@qti.qualcomm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The max payload size is negotiated through the configure and configure
response messages. Update the max payload size based on the
configuration response value, if present.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

During program it's recommended to reduce the num_sectors to only cover
the sectors containing data to be written and not write zero-block in
the rest. This reduce the time spent sending unnecessary blocks of
zeros.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Reduce the number of write operations by batching up sectors in a
max_payload_size sized buffer and write them in one chunk. Using the
qcserial driver will still chop up the USB traffic in 4kB chunks, so no
measurable perfomance improvement is seen.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The MaxPayloadSizeToTargetInBytes parameter of the configure command is
supposed to set the maximum size of the transfer unit. This size is
however limited by the use of the in-kernel qcserial driver and the use
of sector-sized writes. Yet increasing it, drastically bumps the
transfer speed, so leave it high.

NB. The max payload size supported by the device is part of the
configure response, if the device supports a value less than the
requested size - which we just ignore today.

Suggested-by: Kirill Kapranov <c_kkapra@qti.qualcomm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

To aid fixing performance problems, calculate and print out the program
rate.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This bootable device is not always partition number 1. Search the
program entries for an entry that has the label xbl or sbl1 and use the
partition number to mark the boot partition bootable.

Reported-by: Kirill Kapranov <kkapra@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The DONE message contains a return code denoting if the firmware is done
(1) requesting files from the host, or if there are more requests to
come (0). Unfortunately on some platforms the ROM code sends 0
regardless, so we just have to assume that we're done.

This assumes that there is only ever one image to transfer.

Reported-by: Kirill Kapranov <kkapra@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

GNU coding standards notably specifies:
 * install files with the $(DESTDIR) to the target system image
 * install files with the $(prefix), not $(PREFIX)
 * the default value of $(prefix) should be /usr/local

as per
https://www.gnu.org/prep/standards/html_node/Directory-Variables.html

.

Suggested-by: Kirill Kapranov <kkapra@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Merge license headers into the LICENSE file.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Convenient file to be used with git-review to make it simpler to contribute
patches into Linaro Gerrit review.

Change-Id: Ia96d2fea0de031e67f03c4384fb20dc9d5696c28
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>

Rename "buf" to "path" to clarify things and increase the size to
PATH_MAX in order to silence a compile time warning the snprintf() in
find_qdl_tty() might be truncated.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Two assert incorrectly assigned the desired values rather than verify
that they where correct, fix this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Remove some left over functions from development, they can be added back
as needed in the future.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Not all program XML tags contain the readback attribute and as we don't
care about the value at this point lets just stop caring about it for
now.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This adds a license header to all files and updates the README with
information on building the project.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>