Skip to content

Tags

Tags give the ability to mark specific points in history as being important
  • sent/amlogic/v6.7/upstream/dsi-ccf-vim3-v8
    824f5522 · arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper · 
    drm/meson: add support for MIPI DSI Display

The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a),
with a custom glue managing the IP resets, clock and data input similar to the DW-HDMI
glue on the same Amlogic SoCs.

This is a follow-up of v5  now the DRM patches are applied, the clk & DT changes
remains for a full DSI support on G12A & SM1 platforms.

The DW-MIPI-DSI transceiver + D-PHY are clocked by the GP0 PLL, and the ENCL encoder + VIU
pixel reader by the VCLK2 clock using the HDMI PLL.

The DW-MIPI-DSI transceiver gets this pixel stream as input clocked with the VCLK2 clock.

An optional "MEAS" clock can be enabled to measure the delay between each vsync feeding the
DW-MIPI-DSI transceiver.

The clock setup has been redesigned to use CCF, a common PLL (GP0) and the VCLK2 clock
path for DSI in preparation of full CCF support and possibly dual display with HDMI.

The change from v5 is that now we use a "VCLK" driver instea dof notifier and rely
on CLK_SET_RATE_GATE to ensure the VCLK gate operation are called.

To: Jerome Brunet <jbrunet@baylibre.com>
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Kevin Hilman <khilman@baylibre.com>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: David Airlie <airlied@gmail.com>
To: Daniel Vetter <daniel@ffwll.ch>
To: Jagan Teki <jagan@amarulasolutions.com>
To: Nicolas Belin <nbelin@baylibre.com>
Cc: linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v8:
- Switch vclk clk driver to parm as requested by Jerome
- Added bindings fixes to amlogic,meson-axg-mipi-pcie-analog & amlogic,g12a-mipi-dphy-analog
- Fixed DT errors in vim3 example and MNT Reform DT
- Rebased on next-20231107, successfully tested on VIM3L
- Link to v7: https://lore.kernel.org/r/20230803-amlogic-v6-4-upstream-dsi-ccf-vim3-v7-0-762219fc5b28@linaro.org

Changes in v7:
- Added review tags
- Fixed patch 5 thanks to George
- Link to v6: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v6-0-fd2ac9845472@linaro.org

Changes in v6:
- dropped applied DRM patches
- dropped clk private prefix patches
- rebased on top of 20230607-topic-amlogic-upstream-clkid-public-migration-v2-0-38172d17c27a@linaro.org
- re-ordered/cleaned ENCL patches to match clkid public migration
- Added new "vclk" driver
- uses vclk driver instead of notifier
- cleaned VCLK2 clk flags
- add px_clk gating from DSI driver
- Link to v5: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-0-56eb7a4d5b8e@linaro.org

Changes in v5:
- Aded PRIV all the G12 internal clk IDS to simplify public exposing
- Fixed the DSI bindings
- Fixed the DSI HSYNC/VSYNC polarity handling
- Fixed the DSI clock setup
- Fixed the DSI phy timings
- Dropped components for DSI, only keeping it for HDMI
- Added MNT Reform 2 CM4 DT
- Dropped already applied PHY fix
- Link to v4: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v4-0-2592c29ea263@linaro.org

Changes from v3 at [3]:
- switched all clk setup via CCF
- using single PLL for DSI controller & ENCL encoder
- added ENCL clocks to CCF
- make the VCLK2 clocks configuration by CCF
- fixed probe/bind of DSI controller to work with panels & bridges
- added bit_clk to controller to it can setup the BIT clock aswell
- added fix for components unbind
- added fix for analog phy setup value
- added TS050 timings fix
- dropped previous clk control patch

Changes from v2 at [2]:
- Fixed patch 3
- Added reviews from Jagan
- Rebased on v5.19-rc1

Changes from v1 at [1]:
- fixed DSI host bindings
- add reviewed-by tags for bindings
- moved magic values to defines thanks to Martin's searches
- added proper prefixes to defines
- moved phy_configure to phy_init() dw-mipi-dsi callback
- moved phy_on to a new phy_power_on() dw-mipi-dsi callback
- correctly return phy_init/configure errors to callback returns

[1] https://lore.kernel.org/r/20200907081825.1654-1-narmstrong@baylibre.com
[2] https://lore.kernel.org/r/20220120083357.1541262-1-narmstrong@baylibre.com
[3] https://lore.kernel.org/r/20220617072723.1742668-1-narmstrong@baylibre.com

---
Neil Armstrong (12):
      dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids
      dt-bindings: soc: amlogic,meson-gx-hhi-sysctrl: add example covering meson-axg-hhi-sysctrl
      dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: drop text about parent syscon and drop example
      dt-bindings: phy: amlogic,g12a-mipi-dphy-analog: drop unneeded reg property and example
      dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module
      clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks
      clk: meson: add vclk driver
      clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
      drm/meson: gate px_clk when setting rate
      arm64: meson: g12-common: add the MIPI DSI nodes
      DONOTMERGE: arm64: meson: khadas-vim3l: add DSI panel
      arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper

 Documentation/devicetree/bindings/arm/amlogic.yaml |   1 +
 .../phy/amlogic,g12a-mipi-dphy-analog.yaml         |  12 -
 .../phy/amlogic,meson-axg-mipi-pcie-analog.yaml    |  17 -
 .../soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml  |  41 +++
 arch/arm64/boot/dts/amlogic/Makefile               |   1 +
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi  |  70 ++++
 .../meson-g12b-bananapi-cm4-mnt-reform2.dts        | 384 +++++++++++++++++++++
 .../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi   |   2 +-
 arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi |  74 ++++
 .../boot/dts/amlogic/meson-sm1-khadas-vim3l.dts    |   2 +-
 drivers/clk/meson/Kconfig                          |   5 +
 drivers/clk/meson/Makefile                         |   1 +
 drivers/clk/meson/g12a.c                           | 106 ++++--
 drivers/clk/meson/vclk.c                           | 141 ++++++++
 drivers/clk/meson/vclk.h                           |  51 +++
 drivers/gpu/drm/meson/meson_dw_mipi_dsi.c          |   7 +
 include/dt-bindings/clock/g12a-clkc.h              |   2 +
 17 files changed, 866 insertions(+), 51 deletions(-)
---
base-commit: 5cd631a52568a18b12fd2563418985c8cb63e4b0
change-id: 20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-b8e5217e1f4a

Best regards,
  • sent/topic/sm8450/upstream/soundwire-bindings-fix-v1
    1d7ee7d8 · arm64: dts: qcom: sm8450: fix soundwire controllers node name · 
    (no cover subject)

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Neil Armstrong (1):
      arm64: dts: qcom: sm8450: fix soundwire controllers node name

 arch/arm64/boot/dts/qcom/sm8450.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
---
base-commit: d9ea330bc3c68e8d08e116f3827ae94568fef367
change-id: 20231106-topic-sm8450-upstream-soundwire-bindings-fix-fdd40dbabf6e

Best regards,
  • sent/topic/sm8650/upstream/dt-v2
    5d10c649 · arm64: dts: qcom: sm8650-qrd: add interconnect dependent device nodes · 
    arm64: dts: qcom: Introduce SM8650 platforms device tree

This introduces the Device Tree for the recently announced Snapdragon 8 Gen 3
from Qualcomm, you can find the marketing specifications at:
https://docs.qualcomm.com/bundle/publicresource/87-71408-1_REV_B_Snapdragon_8_gen_3_Mobile_Platform_Product_Brief.pdf

Bindings and base Device Tree for the SM8650 SoC, MTP (Mobile Test Platform)
and QRD (Qualcommm Reference Device) are splited in two:
- 1-5: boot-to-shell first set that are only build-dependent on Clock bindings
- 6-8: multimedia second set that are build-dependent with Interconnect bindings

Features added and enabled:
- CPUs with CPUFREQ, SCPI idle states
- QICv3, IOMMU, Timers
- Interconnect NoCs with LLCC/CPU BWMONs
- SoC 3xTemperature Sensors
- Pinctrl/GPIO with PDC wakeup support
- Global, GPU, Display, TCSR Clock Controllers
- cDSP, aDSP and MPSS with SMP2P
- QuP/I2C Master Hub I2C and SPI controllers + GPI DMA
- PCIe 0/1
- USB2/USB3 with USB3/DP Combo PHY
- UFS with Inline Crypto Engine
- Crypto Engine + DMA and True Random Generator
- SDHCI
- Mobile Display Subsystem with 2xDSI output
- PMIC Glink (USB-PD UCSI + Altmode) provided by aDSP firmware
- GPIO and PMIC Buttons/LEDs on QRD board
- WCN7850 Bluetooth
- DSI + Touch panel

Bindings Dependencies:
- aoss-qmp: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-aoss-qmp-v1-1-8940621d704c@linaro.org/ - Reviewed
- bwmon: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-bwmon-v1-1-11efcdd8799e@linaro.org/ - Reviewed
- cpufreq: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-cpufreq-v1-1-31dec4887d14@linaro.org/ - Applied
- dwc3: https://lore.kernel.org/all/20231030-topic-sm8650-upstream-bindings-dwc3-v2-1-60c0824fb835@linaro.org/ - Reviewed
- gpi: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-gpi-v2-1-4de85293d730@linaro.org/ - Reviewed
- ice: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-ice-v1-1-6b2bc14e71db@linaro.org/ - Reviewed
- ipcc: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-ipcc-v1-1-acca4318d06e@linaro.org/ - Reviewed
- pcie: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-pcie-v1-1-0e3d6f0c5827@linaro.org/ - Reviewed
- pcd: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-pdc-v1-1-42f62cc9858c@linaro.org/ - Reviewed
- pmic-glink: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-pmic-glink-v1-1-0c2829a62565@linaro.org/ - Reviewed
- qce: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-qce-v1-1-7e30dba20dbf@linaro.org/ - Reviewed
- rng: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-rng-v1-1-6b6a020e3441@linaro.org/ - Reviewed
- scm: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-scm-v2-1-68a8db7ae434@linaro.org/ - Reviewed
- sdhci: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-scm-v2-1-68a8db7ae434@linaro.org/ - Reviewed
- smmu: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-smmu-v1-1-bfa25faa061e@linaro.org/ - Reviewed
- tsens: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-bindings-tsens-v2-1-5add2ac04943@linaro.org/ - Reviewed
- ufs: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-bindings-ufs-v3-1-a96364463fd5@linaro.org - Reviewed
- clocks: https://lore.kernel.org/all/20231106-topic-sm8650-upstream-clocks-v3-0-761a6fadb4c0@linaro.org/
- interconnect: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-interconnect-v1-0-b7277e03aa3d@linaro.org/ - Reviewed
- llcc: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-llcc-v2-0-f281cec608e2@linaro.org - Reviewed
- mdss: https://lore.kernel.org/all/20231030-topic-sm8650-upstream-mdss-v2-0-43f1887c82b8@linaro.org/ - Reviewed
- phy: https://lore.kernel.org/all/20231030-topic-sm8650-upstream-phy-v2-0-a543a4c4b491@linaro.org/ - Reviewed
- remoteproc: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-remoteproc-v2-0-609ee572e0a2@linaro.org - Reviewed
- rpmpd: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-rpmpd-v1-0-f25d313104c6@linaro.org/ - Applied
- tlmm: https://lore.kernel.org/all/20231106-topic-sm8650-upstream-tlmm-v3-0-0e179c368933@linaro.org/ - Reviewed
- goodix: https://lore.kernel.org/all/20231106-topic-goodix-berlin-upstream-initial-v11-0-5c47e9707c03@linaro.org/ - Reviewed

Build Dependencies:
- clocks: https://lore.kernel.org/all/20231106-topic-sm8650-upstream-clocks-v3-0-761a6fadb4c0@linaro.org/
- interconnect: https://lore.kernel.org/all/20231025-topic-sm8650-upstream-interconnect-v1-0-b7277e03aa3d@linaro.org/ - Reviewed

Other:
- socinfo: https://lore.kernel.org/all/20231030-topic-sm8650-upstream-socinfo-v2-0-4751e7391dc9@linaro.org/ - Reviewed

Merge Strategy:
- Merge patches 1-5 with Clock bindings immutable branch
- Merge patches 6-8 with Interconnect immutable branch

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- Drop RFC since most of bindings were reviewed
- Collect Reviewed-by/Acked-bys
- Remove #ifndef PMK8550VE_SID in favor of #define in sm8550 dts
- Add allow-set-load/allowed-modes to LDOs
- Add QCOM_ICC_TAG_ALWAYS/QCOM_ICC_TAG_ACTIVE_ONLY to interconnects = <> instead of 0 & 3
- minimal sm8650-qrd.dts cleanup
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-dt-v1-0-a821712af62f@linaro.org

---
Neil Armstrong (8):
      dt-bindings: arm: qcom: document SM8650 and the reference boards
      arm64: dts: qcom: add initial SM8650 dtsi
      arm64: dts: qcom: pm8550ve: make PMK8550VE SID configurable
      arm64: dts: qcom: sm8650: add initial SM8650 MTP dts
      arm64: dts: qcom: sm8650: add initial SM8650 QRD dts
      arm64: dts: qcom: sm8650: add interconnect dependent device nodes
      arm64: dts: qcom: sm8650-mtp: add interconnect dependent device nodes
      arm64: dts: qcom: sm8650-qrd: add interconnect dependent device nodes

 Documentation/devicetree/bindings/arm/qcom.yaml |    7 +
 arch/arm64/boot/dts/qcom/Makefile               |    2 +
 arch/arm64/boot/dts/qcom/pm8550ve.dtsi          |    6 +-
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts         |    1 +
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts         |    1 +
 arch/arm64/boot/dts/qcom/sm8650-mtp.dts         |  678 +++
 arch/arm64/boot/dts/qcom/sm8650-qrd.dts         |  803 ++++
 arch/arm64/boot/dts/qcom/sm8650.dtsi            | 5610 +++++++++++++++++++++++
 8 files changed, 7105 insertions(+), 3 deletions(-)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-dt-ee696999df62

Best regards,
  • sent/topic/goodix-berlin/upstream/initial-v11
    54afeba2 · Input: goodix-berlin - add SPI support for Goodix Berlin Touchscreen IC · 
    Input: add initial support for Goodix Berlin touchscreen IC

These touchscreen ICs support SPI, I2C and I3C interface, up to
10 finger touch, stylus and gestures events.

This initial driver is derived from the Goodix goodix_ts_berlin
available at [1] and [2] and only supports the GT9916 IC
present on the Qualcomm SM8550 MTP & QRD touch panel.

The current implementation only supports BerlinD, aka GT9916.

Support for advanced features like:
- Firmware & config update
- Stylus events
- Gestures events
- Previous revisions support (BerlinA or BerlinB)
is not included in current version.

The current support will work with currently flashed firmware
and config, and bail out if firmware or config aren't flashed yet.

[1] https://github.com/goodix/goodix_ts_berlin
[2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers

To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: linux-input@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Bastien Nocera <hadess@hadess.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: Jeff LaBundy <jeff@labundy.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v11:
- Fixes according to Jeff's review:
 - s/dev_info/dev_err/ in goodix_berlin_get_ic_info()
 - remove spurious return instead of goto in goodix_berlin_get_ic_info()
 - added back dropped msleep() in goodix_berlin_request_handle_reset()
- Link to v10: https://lore.kernel.org/r/20231023-topic-goodix-berlin-upstream-initial-v10-0-88eec2e51c0b@linaro.org

Changes in v10:
- Fix according to Dmitry's review:
 - move goodix_berlin_get_ic_info() afe_data to heap
 - merge the goodix_berlin_parse_finger() loops and skip invalid fingers instead of returning
 - remove unwanted goodix_berlin_touch_handler() "static" for buffer
 - only call goodix_berlin_request_handle_reset() if gpio was provided
 - use "error = func(); if(error) return error;" instead of "return func()" when function handles multiple error cases
- Link to v9: https://lore.kernel.org/r/20231021-topic-goodix-berlin-upstream-initial-v9-0-13fb4e887156@linaro.org

Changes in v9:
- Rebased on next-20231020
- Link to v8: https://lore.kernel.org/r/20231003-topic-goodix-berlin-upstream-initial-v8-0-171606102ed6@linaro.org

Changes in v8:
- Add missing bitfield.h include in core
- Link to v7: https://lore.kernel.org/r/20231002-topic-goodix-berlin-upstream-initial-v7-0-792fb91f5e88@linaro.org

Changes in v7:
- rebased on v6.6-rc3
- Link to v6: https://lore.kernel.org/r/20230912-topic-goodix-berlin-upstream-initial-v6-0-b4ecfa49fb9d@linaro.org

Changes in v6:
- rebased on v6.6-rc1
- changed commit message prefix to match the other Input commits
- Link to v5: https://lore.kernel.org/r/20230801-topic-goodix-berlin-upstream-initial-v5-0-079252935593@linaro.org

Changes in v5:
- rebased on next-20230801
- Link to v4: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v4-0-0947c489be17@linaro.org

Changes in v4:
- Core updates:
 - drop kconfig depends, deps will be handled by _SPI and _I2C
 - change power_on() error labels
 - print errors on all dev_err() prints
 - remove useless default variable initialization
 - switch irq touch checksum error to dev_err()
 - add Jeff's review tag
- I2C changes
 - change REGMAP_I2C Kconfig from depends to select
 - add Jeff's review tag
- SPI changes
 - add select REGMAP to Kconfig
 - added GOODIX_BERLIN_ prefix to defines
 - switched from ret to error
 - add Jeff's review tag
- Link to v3: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v3-0-f0577cead709@linaro.org

Changes in v3:
- Another guge cleanups after Jeff's review:
 - appended goodix_berlin_ before all defines
 - removed some unused defines
 - removed retries on most of read functions, can be added back later
 - added __le to ic_info structures
 - reworked and simplified irq handling, dropped enum and ts_event structs
 - added struct for touch data
 - simplified and cleaned goodix_berlin_check_checksum & goodix_berlin_is_dummy_data
 - moved touch_data_addr to the end of the main code_data
 - reworked probe to get_irq last and right before setip input device
 - cleaned probe by removing the "cd->dev"
 - added short paragraph to justify new driver for berlin devices
 - defined all offsets & masks
- Added bindings review tag
- Link to v2: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v2-0-26bc8fe1e90e@linaro.org

Changes in v2:
- Huge cleanups after Jeff's review:
 - switch to error instead of ret
 - drop dummy vendor/product ids
 - drop unused defined/enums
 - drop unused ic_info and only keep needes values
 - cleanup namings and use goodix_berlin_ everywhere
 - fix regulator setup
 - fix default variables value when assigned afterwars
 - removed indirections
 - dropped debugfs
 - cleaned input_dev setup
 - dropped _remove()
 - sync'ed i2c and spi drivers
- fixed yaml bindings
- Link to v1: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v1-0-4a0741b8aefd@linaro.org

---
Neil Armstrong (4):
      dt-bindings: input: document Goodix Berlin Touchscreen IC
      Input: add core support for Goodix Berlin Touchscreen IC
      Input: goodix-berlin - add I2C support for Goodix Berlin Touchscreen IC
      Input: goodix-berlin - add SPI support for Goodix Berlin Touchscreen IC

 .../bindings/input/touchscreen/goodix,gt9916.yaml  |  95 ++++
 drivers/input/touchscreen/Kconfig                  |  31 ++
 drivers/input/touchscreen/Makefile                 |   3 +
 drivers/input/touchscreen/goodix_berlin.h          | 159 ++++++
 drivers/input/touchscreen/goodix_berlin_core.c     | 595 +++++++++++++++++++++
 drivers/input/touchscreen/goodix_berlin_i2c.c      |  74 +++
 drivers/input/touchscreen/goodix_berlin_spi.c      | 177 ++++++
 7 files changed, 1134 insertions(+)
---
base-commit: 2030579113a1b1b5bfd7ff24c0852847836d8fd1
change-id: 20230606-topic-goodix-berlin-upstream-initial-ba97e8ec8f4c

Best regards,
  • sent/topic/sm8650/upstream/tlmm-v3
    4b38cd75 · pinctrl: qcom: Introduce the SM8650 Top Level Mode Multiplexer driver · 
    pinctrl: qcom: Introduce Pinctrl/GPIO for SM8650

The SM8650 Top Level Mode Multiplexer supports 211 GPIOs,
and the usual UFS Reset, SDC Clk/Cmd/Data special pins.

An handful of pins can have their IRQ generated by the PDC
module, and for this support for the new wakeup_present &
wakeup_enable_bit is required to allow the "wakeup" event
to be passed to PDC and generate an interrupt or a wakeup
system event.

As SM8550, it also supports the i2c_pull_bit bit to enable the
on-SoC load resistor for I2C busses.

Dependencies: None

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Linus Walleij <linus.walleij@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v3:
- Correctly squashed intr_wakeup_ change protection with the spinlock
- Collected bindings reviewed-by
- Link to v2: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-tlmm-v2-0-9d4d4386452d@linaro.org

Changes in v2:
- Collect reviewed-bys
- Fixed unevaluatedProperties handling, and dropped the true properties
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-tlmm-v1-0-4e3d84a3a46b@linaro.org

---
Neil Armstrong (3):
      dt-bindings: pinctrl: document the SM8650 Top Level Mode Multiplexer
      pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits
      pinctrl: qcom: Introduce the SM8650 Top Level Mode Multiplexer driver

 .../bindings/pinctrl/qcom,sm8650-tlmm.yaml         |  147 ++
 drivers/pinctrl/qcom/Kconfig.msm                   |    8 +
 drivers/pinctrl/qcom/Makefile                      |    1 +
 drivers/pinctrl/qcom/pinctrl-msm.c                 |   42 +
 drivers/pinctrl/qcom/pinctrl-msm.h                 |    5 +
 drivers/pinctrl/qcom/pinctrl-sm8650.c              | 1762 ++++++++++++++++++++
 6 files changed, 1965 insertions(+)
---
base-commit: ed75ce58b3a55d2cd95b68a06fdb010e1e18d825
change-id: 20231016-topic-sm8650-upstream-tlmm-4ece354ef319

Best regards,
  • sent/topic/sm8650/upstream/remoteproc-v3
    5b548621 · remoteproc: qcom: pas: Add SM8650 remoteproc support · 
    remoteproc: qcom: Introduce DSP support for SM8650

Add the bindings and driver changes for DSP support on the
SM8650 platform in order to enable the aDSP, cDSP and MPSS
subsystems to boot.

Compared to SM8550, where SM8650 uses the same dual firmware files,
(dtb file and main firmware) the memory zones requirement has changed:
- cDSP: now requires 2 memory zones to be configured as shared
  between the cDSP and the HLOS subsystem
- MPSS: In addition to the memory zone required for the SM8550
  MPSS, another one is required to be configured for MPSS
  usage only.

In order to handle this and avoid code duplication, the region_assign_*
code patch has been made more generic and is able handle multiple
DSP-only memory zones (for MPSS) or DSP-HLOS shared memory zones (cDSP)
in the same region_assign functions.

Dependencies: None

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Manivannan Sadhasivam <mani@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v3:
- Collected bindings review tags
- Small fixes suggested by Mukesh Ojha
- Link to v2: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-remoteproc-v2-0-609ee572e0a2@linaro.org

Changes in v2:
- Fixed sm8650 entries in allOf:if:then to match Krzysztof's comments
- Collected reviewed-by on patch 3
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-remoteproc-v1-0-a8d20e4ce18c@linaro.org

---
Neil Armstrong (3):
      dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS
      remoteproc: qcom: pas: make region assign more generic
      remoteproc: qcom: pas: Add SM8650 remoteproc support

 .../bindings/remoteproc/qcom,sm8550-pas.yaml       |  44 +++++-
 drivers/remoteproc/qcom_q6v5_pas.c                 | 151 ++++++++++++++++-----
 2 files changed, 159 insertions(+), 36 deletions(-)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-remoteproc-66a87eeb6fee

Best regards,
  • sent/topic/sm8650/upstream/clocks-v3
    b6512efe · clk: qcom: rpmh: add clocks for SM8650 · 
    clk: qcom: Introduce clocks drivers for SM8650

This patchset introduces the following SM8650 Clock drivers:
- GCC: Global Clock Controller
- DISPCC: Display Clock Controller
- TCSR Clock Controller
- GPUCC: GPU Clock Controller driver
- rpmh clocks

Dependencies: None

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Philipp Zabel <p.zabel@pengutronix.de>
To: Taniya Das <quic_tdas@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v3:
- Use sm8550 tcsr bindings instead of a new one
- split GCC driver in 2 to pass the mailinig lists 100k chars limit, no code change
- collected review tags
- Link to v2: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-clocks-v2-0-144333e086a2@linaro.org

Changes in v2:
- Fix Copyright headers
- Fix include in all c files
- Use "select GCC" instead of "depends on GCC"
- GCC:
  - remove UBWCP clocks until we know how to use them
  - switch to clk_rcg2_shared_ops when needed
  - use RETAIN_FF_ENABLE and/or VOTABLE GDSC flasgs when needed
  - add GDSC collapse_ctrl/mask when needed
  - fix "Keep the critical clock always-On" comments
- TCRSCC: use qcom_cc_probe()
- DISPCC: fix runtime_pm_sync on error
- rpmh: expand comment on clk3a
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-clocks-v1-0-c89b59594caf@linaro.org

---
Neil Armstrong (11):
      dt-bindings: clock: qcom: document the SM8650 TCSR Clock Controller
      dt-bindings: clock: qcom: document the SM8650 General Clock Controller
      dt-bindings: clock: qcom: document the SM8650 Display Clock Controller
      dt-bindings: clock: qcom: document the SM8650 GPU Clock Controller
      dt-bindings: clock: qcom-rpmhcc: document the SM8650 RPMH Clock Controller
      clk: qcom: add the SM8650 Global Clock Controller driver, part 1
      clk: qcom: add the SM8650 Global Clock Controller driver, part 2
      clk: qcom: add the SM8650 TCSR Clock Controller driver
      clk: qcom: add the SM8650 Display Clock Controller driver
      clk: qcom: add the SM8650 GPU Clock Controller driver
      clk: qcom: rpmh: add clocks for SM8650

 .../devicetree/bindings/clock/qcom,rpmhcc.yaml     |    1 +
 .../bindings/clock/qcom,sm8450-gpucc.yaml          |    2 +
 .../bindings/clock/qcom,sm8550-tcsr.yaml           |    8 +-
 .../bindings/clock/qcom,sm8650-dispcc.yaml         |  106 +
 .../devicetree/bindings/clock/qcom,sm8650-gcc.yaml |   65 +
 drivers/clk/qcom/Kconfig                           |   35 +
 drivers/clk/qcom/Makefile                          |    4 +
 drivers/clk/qcom/clk-rpmh.c                        |   34 +
 drivers/clk/qcom/dispcc-sm8650.c                   | 1810 +++++++++
 drivers/clk/qcom/gcc-sm8650.c                      | 3849 ++++++++++++++++++++
 drivers/clk/qcom/gpucc-sm8650.c                    |  661 ++++
 drivers/clk/qcom/tcsrcc-sm8650.c                   |  182 +
 include/dt-bindings/clock/qcom,sm8650-dispcc.h     |  102 +
 include/dt-bindings/clock/qcom,sm8650-gcc.h        |  254 ++
 include/dt-bindings/clock/qcom,sm8650-gpucc.h      |   43 +
 include/dt-bindings/clock/qcom,sm8650-tcsr.h       |   18 +
 include/dt-bindings/reset/qcom,sm8650-gpucc.h      |   20 +
 17 files changed, 7192 insertions(+), 2 deletions(-)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-clocks-3c09f464b7d4

Best regards,
  • sent/topic/sm8650/upstream/mdss-v2
    9e0cc358 · drm/msm: dsi: add support for DSI 2.8.0 · 
    drm/msm: Introduce display support for SM8650

The SM8650 MDSS is very close from the MDSS 9.0.0 found
on the SM8550 SoC, with the following difference:
- DSI PHY 2.8.8, no significant differences
- DPU 10.0.0:
  - Enhanced max_linewidth to 8k
  - PINGPONG_8 & PINGPONG_9
  - MERGE_3D_4
  - DSC_4 & DSC_5, DSC_NATIVE_42x on DSC0/1

This patchset contains DSI PHY, DSI Controller, DPU & MDSS bindings
in addition to the driver changes.

Support for Display Port output is expected for later.

Dependencies: None

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

To: Rob Clark <robdclark@gmail.com>
To: Abhinav Kumar <quic_abhinavk@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Sean Paul <sean@poorly.run>
To: Marijn Suijten <marijn.suijten@somainline.org>
To: David Airlie <airlied@gmail.com>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Jonathan Marek <jonathan@marek.ca>
To: Krishna Manikandan <quic_mkrishn@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- Rebased on top of https://patchwork.freedesktop.org/series/119804/
- Enabled SDMA
- Fixed sm8650_rt_pri_lvl table
- Collected Reviewed-by tags
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-mdss-v1-0-bb219b8c7a51@linaro.org

---
Neil Armstrong (8):
      dt-bindings: display: msm-dsi-phy-7nm: document the SM8650 DSI PHY
      dt-bindings: display: msm-dsi-controller-main: document the SM8650 DSI Controller
      dt-bindings: display: msm: document the SM8650 DPU
      dt-bindings: display: msm: document the SM8650 Mobile Display Subsystem
      drm/msm/dpu: add support for SM8650 DPU
      drm/msm: mdss: add support for SM8650
      drm/msm: dsi: add support for DSI-PHY on SM8650
      drm/msm: dsi: add support for DSI 2.8.0

 .../bindings/display/msm/dsi-controller-main.yaml  |   2 +
 .../bindings/display/msm/dsi-phy-7nm.yaml          |   1 +
 .../bindings/display/msm/qcom,sm8650-dpu.yaml      | 127 ++++++
 .../bindings/display/msm/qcom,sm8650-mdss.yaml     | 322 +++++++++++++++
 .../drm/msm/disp/dpu1/catalog/dpu_10_0_sm8650.h    | 457 +++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |  26 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h        |   3 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
 drivers/gpu/drm/msm/dsi/dsi_cfg.c                  |  17 +
 drivers/gpu/drm/msm/dsi/dsi_cfg.h                  |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c              |   2 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h              |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c          |  27 ++
 drivers/gpu/drm/msm/msm_mdss.c                     |   1 +
 15 files changed, 989 insertions(+)
---
base-commit: 8c53ca7d71a2d7274b51ec14a0d91b6ede09fd83
change-id: 20231016-topic-sm8650-upstream-mdss-e3d95e09c7b8

Best regards,
  • sent/topic/sm8650/upstream/remoteproc-v2
    62790de7 · remoteproc: qcom: pas: Add SM8650 remoteproc support · 
    remoteproc: qcom: Introduce DSP support for SM8650

Add the bindings and driver changes for DSP support on the
SM8650 platform in order to enable the aDSP, cDSP and MPSS
subsystems to boot.

Compared to SM8550, where SM8650 uses the same dual firmware files,
(dtb file and main firmware) the memory zones requirement has changed:
- cDSP: now requires 2 memory zones to be configured as shared
  between the cDSP and the HLOS subsystem
- MPSS: In addition to the memory zone required for the SM8550
  MPSS, another one is required to be configured for MPSS
  usage only.

In order to handle this and avoid code duplication, the region_assign_*
code patch has been made more generic and is able handle multiple
DSP-only memory zones (for MPSS) or DSP-HLOS shared memory zones (cDSP)
in the same region_assign functions.

Dependencies: None

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Manivannan Sadhasivam <mani@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- Fixed sm8650 entries in allOf:if:then to match Krzysztof's comments
- Collected reviewed-by on patch 3
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-remoteproc-v1-0-a8d20e4ce18c@linaro.org

---
Neil Armstrong (3):
      dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS
      remoteproc: qcom: pas: make region assign more generic
      remoteproc: qcom: pas: Add SM8650 remoteproc support

 .../bindings/remoteproc/qcom,sm8550-pas.yaml       |  44 +++++-
 drivers/remoteproc/qcom_q6v5_pas.c                 | 152 ++++++++++++++++-----
 2 files changed, 159 insertions(+), 37 deletions(-)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-remoteproc-66a87eeb6fee

Best regards,
  • sent/topic/sm8650/upstream/clocks-v2
    64db04fe · clk: qcom: rpmh: add clocks for SM8650 · 
    clk: qcom: Introduce clocks drivers for SM8650

This patchset introduces the following SM8650 Clock drivers:
- GCC: Global Clock Controller
- DISPCC: Display Clock Controller
- TCSR Clock Controller
- GPUCC: GPU Clock Controller driver
- rpmh clocks

Dependencies: None

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Philipp Zabel <p.zabel@pengutronix.de>
To: Taniya Das <quic_tdas@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- Fix Copyright headers
- Fix include in all c files
- Use "select GCC" instead of "depends on GCC"
- GCC:
  - remove UBWCP clocks until we know how to use them
  - switch to clk_rcg2_shared_ops when needed
  - use RETAIN_FF_ENABLE and/or VOTABLE GDSC flasgs when needed
  - add GDSC collapse_ctrl/mask when needed
  - fix "Keep the critical clock always-On" comments
- TCRSCC: use qcom_cc_probe()
- DISPCC: fix runtime_pm_sync on error
- rpmh: expand comment on clk3a
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-clocks-v1-0-c89b59594caf@linaro.org

---
Neil Armstrong (10):
      dt-bindings: clock: qcom: document the SM8650 TCSR Clock Controller
      dt-bindings: clock: qcom: document the SM8650 General Clock Controller
      dt-bindings: clock: qcom: document the SM8650 Display Clock Controller
      dt-bindings: clock: qcom: document the SM8650 GPU Clock Controller
      dt-bindings: clock: qcom-rpmhcc: document the SM8650 RPMH Clock Controller
      clk: qcom: add the SM8650 Global Clock Controller driver
      clk: qcom: add the SM8650 TCSR Clock Controller driver
      clk: qcom: add the SM8650 Display Clock Controller driver
      clk: qcom: add the SM8650 GPU Clock Controller driver
      clk: qcom: rpmh: add clocks for SM8650

 .../devicetree/bindings/clock/qcom,rpmhcc.yaml     |    1 +
 .../bindings/clock/qcom,sm8450-gpucc.yaml          |    2 +
 .../bindings/clock/qcom,sm8650-dispcc.yaml         |  106 +
 .../devicetree/bindings/clock/qcom,sm8650-gcc.yaml |   65 +
 .../bindings/clock/qcom,sm8650-tcsr.yaml           |   55 +
 drivers/clk/qcom/Kconfig                           |   35 +
 drivers/clk/qcom/Makefile                          |    4 +
 drivers/clk/qcom/clk-rpmh.c                        |   34 +
 drivers/clk/qcom/dispcc-sm8650.c                   | 1810 +++++++++
 drivers/clk/qcom/gcc-sm8650.c                      | 3849 ++++++++++++++++++++
 drivers/clk/qcom/gpucc-sm8650.c                    |  661 ++++
 drivers/clk/qcom/tcsrcc-sm8650.c                   |  182 +
 include/dt-bindings/clock/qcom,sm8650-dispcc.h     |  102 +
 include/dt-bindings/clock/qcom,sm8650-gcc.h        |  254 ++
 include/dt-bindings/clock/qcom,sm8650-gpucc.h      |   43 +
 include/dt-bindings/clock/qcom,sm8650-tcsr.h       |   18 +
 include/dt-bindings/reset/qcom,sm8650-gpucc.h      |   20 +
 17 files changed, 7241 insertions(+)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-clocks-3c09f464b7d4

Best regards,
  • sent/topic/sm8650/upstream/socinfo-v2
    a232e4e6 · soc: qcom: socinfo: Add SM8650 SoC ID table entry · 
    qcom: socinfo: Add SM8650 SoC ID table entry

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- Splitted patch in 2, moved ID definition in bindings changes patch
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-socinfo-v1-1-6776a5183fa0@linaro.org

---
Neil Armstrong (2):
      dt-bindings: arm: qcom,ids: Add SoC ID for SM8650
      soc: qcom: socinfo: Add SM8650 SoC ID table entry

 drivers/soc/qcom/socinfo.c         | 1 +
 include/dt-bindings/arm/qcom,ids.h | 1 +
 2 files changed, 2 insertions(+)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-socinfo-a4470a24cf91

Best regards,
  • sent/topic/sm8650/upstream/tlmm-v2
    5c9d4259 · fixup! pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits · 
    pinctrl: qcom: Introduce Pinctrl/GPIO for SM8650

The SM8650 Top Level Mode Multiplexer supports 211 GPIOs,
and the usual UFS Reset, SDC Clk/Cmd/Data special pins.

An handful of pins can have their IRQ generated by the PDC
module, and for this support for the new wakeup_present &
wakeup_enable_bit is required to allow the "wakeup" event
to be passed to PDC and generate an interrupt or a wakeup
system event.

As SM8550, it also supports the i2c_pull_bit bit to enable the
on-SoC load resistor for I2C busses.

Dependencies: None

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Linus Walleij <linus.walleij@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- Collect reviewed-bys
- Fixed unevaluatedProperties handling, and dropped the true properties
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-tlmm-v1-0-4e3d84a3a46b@linaro.org

---
Neil Armstrong (4):
      dt-bindings: pinctrl: document the SM8650 Top Level Mode Multiplexer
      pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits
      pinctrl: qcom: Introduce the SM8650 Top Level Mode Multiplexer driver
      fixup! pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits

 .../bindings/pinctrl/qcom,sm8650-tlmm.yaml         |  147 ++
 drivers/pinctrl/qcom/Kconfig.msm                   |    8 +
 drivers/pinctrl/qcom/Makefile                      |    1 +
 drivers/pinctrl/qcom/pinctrl-msm.c                 |   42 +
 drivers/pinctrl/qcom/pinctrl-msm.h                 |    5 +
 drivers/pinctrl/qcom/pinctrl-sm8650.c              | 1762 ++++++++++++++++++++
 6 files changed, 1965 insertions(+)
---
base-commit: ed75ce58b3a55d2cd95b68a06fdb010e1e18d825
change-id: 20231016-topic-sm8650-upstream-tlmm-4ece354ef319

Best regards,
  • sent/topic/sm8650/upstream/phy-v2
    25515f1b · phy: qcom: qmp-combo: add QMP USB3/DP PHY tables for SM8650 · 
    phy: qcom: Introduce PCIe, UFS & USB PHY support for SM8650

The SM8650 PHYs are similar to very close to the ones found
on the SM8550 platform.

Only a few changes in the init tables are required for the
UFS, PCIe and USB3/DP Combo PHYs.

The Synopsys eUSB2 PHY is the same as SM8550, so only a fallback
is added in the bindings.

Dependencies: None

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Vinod Koul <vkoul@kernel.org>
To: Kishon Vijay Abraham I <kishon@kernel.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Abel Vesa <abel.vesa@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-phy@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- bindings: Add missing sm8650 entry in allOf:if:then
- Collected reviewed-by tags from Dmitry
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-phy-v1-0-6137101520c4@linaro.org

---
Neil Armstrong (7):
      dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the SM8650 QMP UFS PHY
      dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: document the SM8650 QMP PCIe PHYs
      dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: document the SM8650 QMP USB/DP Combo PHY
      dt-bindings: phy: qcom,snps-eusb2: document the SM8650 Synopsys eUSB2 PHY
      phy: qcom: qmp-ufs: add QMP UFS PHY tables for SM8650
      phy: qcom: qmp-pcie: add QMP PCIe PHY tables for SM8650
      phy: qcom: qmp-combo: add QMP USB3/DP PHY tables for SM8650

 .../bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml   |  5 ++
 .../bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml    |  2 +
 .../phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml         |  2 +
 .../bindings/phy/qcom,snps-eusb2-phy.yaml          |  1 +
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c          |  4 +
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c           | 65 ++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h     |  1 +
 .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h    |  7 ++
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c            | 86 ++++++++++++++++++++++
 9 files changed, 173 insertions(+)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-phy-9026042f9248

Best regards,
  • sent/topic/sm8650/upstream/llcc-v2
    29aff24f · soc: qcom: llcc: Add configuration data for SM8650 · 
    soc: qcom: llcc: Introduce support for SM8650

Add LLCC tables and Bindings for SM8650 platform.

Dependencies: None

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- Updated LLCC table values with latest vendor changes
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-llcc-v1-0-ba4566225424@linaro.org

---
Neil Armstrong (2):
      dt-bindings: cache: qcom,llcc: Document the SM8650 Last Level Cache Controller
      soc: qcom: llcc: Add configuration data for SM8650

 .../devicetree/bindings/cache/qcom,llcc.yaml       |  1 +
 drivers/soc/qcom/llcc-qcom.c                       | 43 ++++++++++++++++++++++
 2 files changed, 44 insertions(+)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-llcc-9d286c755615

Best regards,
  • sent/topic/sm8650/upstream/bindings/ufs-v3
    2d4d3d4e · dt-bindings: ufs: qcom-ufs: document the SM8650 UFS Controller · 
    (no cover subject)

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Manivannan Sadhasivam <mani@kernel.org>
To: Alim Akhtar <alim.akhtar@samsung.com>
To: Avri Altman <avri.altman@wdc.com>
To: Bart Van Assche <bvanassche@acm.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v3:
- Add missing sm8650 entry in allOf:if:then
- Link to v2: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-bindings-ufs-v2-1-040ad1c44b46@linaro.org

Changes in v2:
- Fixed subject
- Collected review tags
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-bindings-ufs-v1-1-a355e3556531@linaro.org

---
Neil Armstrong (1):
      dt-bindings: ufs: qcom-ufs: document the SM8650 UFS Controller

 Documentation/devicetree/bindings/ufs/qcom,ufs.yaml | 2 ++
 1 file changed, 2 insertions(+)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-bindings-ufs-d03cf52d57d5

Best regards,
  • sent/topic/sm8650/upstream/bindings/dwc3-v2
    34546026 · dt-bindings: usb: qcom,dwc3: document the SM8560 SuperSpeed DWC3 USB controller · 
    (no cover subject)

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Wesley Cheng <quic_wcheng@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- Fixed typo in patch subject
- Added missing sm8650 entry in allOf:if:then for clocks and interrupts
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-bindings-dwc3-v1-1-fdd447e99865@linaro.org

---
Neil Armstrong (1):
      dt-bindings: usb: qcom,dwc3: document the SM8560 SuperSpeed DWC3 USB controller

 Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 3 +++
 1 file changed, 3 insertions(+)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-bindings-dwc3-6e421941f9ff

Best regards,
  • sent/topic/sm8650/upstream/bindings/sdhci-v2
    db5585f8 · dt-bindings: mmc: sdhci-msm: document the SM8650 SDHCI Controller · 
    (no cover subject)

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm85650/upstream/integ

To: Ulf Hansson <ulf.hansson@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Cc: linux-mmc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- Fixed typo in subject
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-bindings-sdhci-v1-1-e644cf937321@linaro.org

---
Neil Armstrong (1):
      dt-bindings: mmc: sdhci-msm: document the SM8650 SDHCI Controller

 Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 1 +
 1 file changed, 1 insertion(+)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-bindings-sdhci-3a47f07807ae

Best regards,
  • sent/topic/sm8650/upstream/bindings/cpufreq-v2
    57e0d7e7 · dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware · 
    (no cover subject)

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm85650/upstream/integ

To: "Rafael J. Wysocki" <rafael@kernel.org>
To: Viresh Kumar <viresh.kumar@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Manivannan Sadhasivam <mani@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- Fixed typo in subject
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-bindings-cpufreq-v1-1-31dec4887d14@linaro.org

---
Neil Armstrong (1):
      dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware

 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml | 1 +
 1 file changed, 1 insertion(+)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-bindings-cpufreq-af0e0277172f

Best regards,
  • sent/topic/sm8650/upstream/bindings/ipcc-v2
    c8591ce2 · dt-bindings: mailbox: qcom-ipcc: document the SM8650 Inter-Processor Communication Controller · 
    (no cover subject)

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm85650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Manivannan Sadhasivam <mani@kernel.org>
To: Jassi Brar <jassisinghbrar@gmail.com>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- Fixed typo in subject
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-bindings-ipcc-v1-1-acca4318d06e@linaro.org

---
Neil Armstrong (1):
      dt-bindings: mailbox: qcom-ipcc: document the SM8650 Inter-Processor Communication Controller

 Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml | 1 +
 1 file changed, 1 insertion(+)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-bindings-ipcc-0b4e1924ee28

Best regards,
  • sent/topic/sm8650/upstream/bindings/tsens-v2
    afe3f5ad · dt-bindings: thermal: qcom-tsens: document the SM8650 Temperature Sensor · 
    (no cover subject)

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm85650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Amit Kucheria <amitk@kernel.org>
To: Thara Gopinath <thara.gopinath@gmail.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>
To: Daniel Lezcano <daniel.lezcano@linaro.org>
To: Zhang Rui <rui.zhang@intel.com>
To: Lukasz Luba <lukasz.luba@arm.com>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- Fixed typo in subject
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-bindings-tsens-v1-1-09fdd17b1116@linaro.org

---
Neil Armstrong (1):
      dt-bindings: thermal: qcom-tsens: document the SM8650 Temperature Sensor

 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
 1 file changed, 1 insertion(+)
---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231016-topic-sm8650-upstream-bindings-tsens-4e748933642e

Best regards,