Select Git revision
Search by author
- Any Author
- authors
-
72162444 72162444 gaochangning
-
Aakash Dave aakash.dave
-
Aaron Kim akim
-
Aaron Kloc akloc
-
Aaron Lan aaron.lan
-
Aaron Nabil aaronna
-
Aaron Pohle aaron.pohle
-
Abbott Chung chung.abbott
-
Abdallah Omar abdallah_omar
-
Abdessamii Chalbi abdessamii.chalbi
-
Abdul Hussain Sirajudeen abdul.hussain
-
Abdullah Alghamdi a.alghamdi
-
Abdullah Elmarghany abdullah_elmarghany
-
Abel Fang abel_fang
-
Abel Vesa
abel.vesa
-
Abhijeet Badurkar abhijeet.badurkar
-
Abhijit Adsule adsule
-
Abhijit Murthy abhijit
-
Abhi Khanal akhanal
-
Abhilash Sahoo abhilashsahoo
- Dec 14, 2024
-
-
Namjae Jeon authored
commit 02dffe9a upstream. There is no check if stream size and start_clu are invalid. If start_clu is EOF cluster and stream size is 4096, It will cause uninit value access. because ei->hint_femp.eidx could be 128(if cluster size is 4K) and wrong hint will allocate next cluster. and this cluster will be same with the cluster that is allocated by exfat_extend_valid_size(). The previous patch will check invalid start_clu, but for clarity, initialize hint_femp.eidx to zero. Cc: stable@vger.kernel.org Reported-by:
<syzbot+01218003be74b5e1213a@syzkaller.appspotmail.com> Tested-by:
Yuezhang Mo <Yuezhang.Mo@sony.com> Signed-off-by:
Namjae Jeon <linkinjeon@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ahmed Ehab authored
commit d7fe143c upstream. Syzbot reports a problem that a warning will be triggered while searching a lock class in look_up_lock_class(). The cause of the issue is that a new name is created and used by lockdep_set_subclass() instead of using the existing one. This results in a lock instance has a different name pointer than previous registered one stored in lock class, and WARN_ONCE() is triggered because of that in look_up_lock_class(). To fix this, change lockdep_set_subclass() to use the existing name instead of a new one. Hence, no new name will be created by lockdep_set_subclass(). Hence, the warning is avoided. [boqun: Reword the commit log to state the correct issue] Reported-by:
<syzbot+7f4a6f7f7051474e40ad@syzkaller.appspotmail.com> Fixes: de8f5e4f ("lockdep: Introduce wait-type checks") Cc: stable@vger.kernel.org Signed-off-by:
Ahmed Ehab <bottaawesome633@gmail.com> Signed-off-by:
Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/lkml/20240824221031.7751-1-bottaawesome633@gmail.com/ Signed-off-by:
-
Nicolas Bouchinet authored
commit 635a9fca upstream. Commit 7c0cca7c ("tty: ldisc: add sysctl to prevent autoloading of ldiscs") introduces the tty_ldisc_autoload sysctl with the wrong proc_handler. .extra1 and .extra2 parameters are set to avoid other values thant SYSCTL_ZERO or SYSCTL_ONE to be set but proc_dointvec do not uses them. This commit fixes this by using proc_dointvec_minmax instead of proc_dointvec. Fixes: 7c0cca7c ("tty: ldisc: add sysctl to prevent autoloading of ldiscs") Cc: stable <stable@kernel.org> Signed-off-by:
Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr> Reviewed-by:
Lin Feng <linf@wangsu.com> Reviewed-by:
Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20241112131357.49582-4-nicolas.bouchinet@clip-os.org Signed-off-by:
-
Jinjie Ruan authored
commit 7290f592 upstream. The string allocated by kmemdup() in aa_unpack_strdup() is not freed and cause following memory leaks, free them to fix it. unreferenced object 0xffffff80c6af8a50 (size 8): comm "kunit_try_catch", pid 225, jiffies 4294894407 hex dump (first 8 bytes): 74 65 73 74 69 6e 67 00 testing. backtrace (crc 5eab668b): [<0000000001e3714d>] kmemleak_alloc+0x34/0x40 [<000000006e6c7776>] __kmalloc_node_track_caller_noprof+0x300/0x3e0 [<000000006870467c>] kmemdup_noprof+0x34/0x60 [<000000001176bb03>] aa_unpack_strdup+0xd0/0x18c [<000000008ecde918>] policy_unpack_test_unpack_strdup_with_null_name+0xf8/0x3ec [<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac [<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000adf936cf>] kthread+0x2e8/0x374 [<0000000041bb1628>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80c2a29090 (size 8): comm "kunit_try_catch", pid 227, jiffies 4294894409 hex dump (first 8 bytes): 74 65 73 74 69 6e 67 00 testing. backtrace (crc 5eab668b): [<0000000001e3714d>] kmemleak_alloc+0x34/0x40 [<000000006e6c7776>] __kmalloc_node_track_caller_noprof+0x300/0x3e0 [<000000006870467c>] kmemdup_noprof+0x34/0x60 [<000000001176bb03>] aa_unpack_strdup+0xd0/0x18c [<0000000046a45c1a>] policy_unpack_test_unpack_strdup_with_name+0xd0/0x3c4 [<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac [<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000adf936cf>] kthread+0x2e8/0x374 [<0000000041bb1628>] ret_from_fork+0x10/0x20 Cc: stable@vger.kernel.org Fixes: 4d944bcd ("apparmor: add AppArmor KUnit tests for policy unpack") Signed-off-by:
Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
-
Jann Horn authored
commit ce8f9fb6 upstream. If some remap_pfn_range() calls succeeded before one failed, we still have buffer pages mapped into the userspace page tables when we drop the buffer reference with comedi_buf_map_put(bm). The userspace mappings are only cleaned up later in the mmap error path. Fix it by explicitly flushing all mappings in our VMA on the error path. See commit 79a61cc3 ("mm: avoid leaving partial pfn mappings around in error case"). Cc: stable@vger.kernel.org Fixes: ed9eccbe ("Staging: add comedi core") Signed-off-by:
Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20241017-comedi-tlb-v3-1-16b82f9372ce@google.com Signed-off-by:
-
Amir Goldstein authored
commit aa52c54d upstream. We got a report that adding a fanotify filsystem watch prevents tail -f from receiving events. Reproducer: 1. Create 3 windows / login sessions. Become root in each session. 2. Choose a mounted filesystem that is pretty quiet; I picked /boot. 3. In the first window, run: fsnotifywait -S -m /boot 4. In the second window, run: echo data >> /boot/foo 5. In the third window, run: tail -f /boot/foo 6. Go back to the second window and run: echo more data >> /boot/foo 7. Observe that the tail command doesn't show the new data. 8. In the first window, hit control-C to interrupt fsnotifywait. 9. In the second window, run: echo still more data >> /boot/foo 10. Observe that the tail command in the third window has now printed the missing data. When stracing tail, we observed that when fanotify filesystem mark is set, tail does get the inotify event, but the event is receieved with the filename: read(4, "\1\0\0\0\2\0\0\0\0\0\0\0\20\0\0\0foo\0\0\0\0\0\0\0\0\0\0\0\0\0", 50) = 32 This is unexpected, because tail is watching the file itself and not its parent and is inconsistent with the inotify event received by tail when fanotify filesystem mark is not set: read(4, "\1\0\0\0\2\0\0\0\0\0\0\0\0\0\0\0", 50) = 16 The inteference between different fsnotify groups was caused by the fact that the mark on the sb requires the filename, so the filename is passed to fsnotify(). Later on, fsnotify_handle_event() tries to take care of not passing the filename to groups (such as inotify) that are interested in the filename only when the parent is watching. But the logic was incorrect for the case that no group is watching the parent, some groups are watching the sb and some watching the inode. Reported-by:
Miklos Szeredi <miklos@szeredi.hu> Fixes: 7372e79c ("fanotify: fix logic of reporting name info with watched parent") Cc: stable@vger.kernel.org # 5.10+ Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Lukas Wunner authored
commit c7acef99 upstream. Dennis reports a boot crash on recent Lenovo laptops with a USB4 dock. Since commit 0fc70886 ("thunderbolt: Reset USB4 v2 host router") and commit 59a54c5f ("thunderbolt: Reset topology created by the boot firmware"), USB4 v2 and v1 Host Routers are reset on probe of the thunderbolt driver. The reset clears the Presence Detect State and Data Link Layer Link Active bits at the USB4 Host Router's Root Port and thus causes hot removal of the dock. The crash occurs when pciehp is unbound from one of the dock's Downstream Ports: pciehp creates a pci_slot on bind and destroys it on unbind. The pci_slot contains a pointer to the pci_bus below the Downstream Port, but a reference on that pci_bus is never acquired. The pci_bus is destroyed before the pci_slot, so a use-after-free ensues when pci_slot_release() accesses slot->bus. In principle this should not happen because pci_stop_bus_device() unbinds pciehp (and therefore destroys the pci_slot) before the pci_bus is destroyed by pci_remove_bus_device(). However the stacktrace provided by Dennis shows that pciehp is unbound from pci_remove_bus_device() instead of pci_stop_bus_device(). To understand the significance of this, one needs to know that the PCI core uses a two step process to remove a portion of the hierarchy: It first unbinds all drivers in the sub-hierarchy in pci_stop_bus_device() and then actually removes the devices in pci_remove_bus_device(). There is no precaution to prevent driver binding in-between pci_stop_bus_device() and pci_remove_bus_device(). In Dennis' case, it seems removal of the hierarchy by pciehp races with driver binding by pci_bus_add_devices(). pciehp is bound to the Downstream Port after pci_stop_bus_device() has run, so it is unbound by pci_remove_bus_device() instead of pci_stop_bus_device(). Because the pci_bus has already been destroyed at that point, accesses to it result in a use-after-free. One might conclude that driver binding needs to be prevented after pci_stop_bus_device() has run. However it seems risky that pci_slot points to pci_bus without holding a reference. Solely relying on correct ordering of driver unbind versus pci_bus destruction is certainly not defensive programming. If pci_slot has a need to access data in pci_bus, it ought to acquire a reference. Amend pci_create_slot() accordingly. Dennis reports that the crash is not reproducible with this change. Abridged stacktrace: pcieport 0000:00:07.0: PME: Signaling with IRQ 156 pcieport 0000:00:07.0: pciehp: Slot #12 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ pci_bus 0000:20: dev 00, created physical slot 12 pcieport 0000:00:07.0: pciehp: Slot(12): Card not present ... pcieport 0000:21:02.0: pciehp: pcie_disable_notification: SLOTCTRL d8 write cmd 0 Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI CPU: 13 UID: 0 PID: 134 Comm: irq/156-pciehp Not tainted 6.11.0-devel+ #1 RIP: 0010:dev_driver_string+0x12/0x40 pci_destroy_slot pciehp_remove pcie_port_remove_service device_release_driver_internal bus_remove_device device_del device_unregister remove_iter device_for_each_child pcie_portdrv_remove pci_device_remove device_release_driver_internal bus_remove_device device_del pci_remove_bus_device (recursive invocation) pci_remove_bus_device pciehp_unconfigure_device pciehp_disable_slot pciehp_handle_presence_or_link_change pciehp_ist Link: https://lore.kernel.org/r/4bfd4c0e976c1776cd08e76603903b338cf25729.1728579288.git.lukas@wunner.de Reported-by:
Dennis Wassenberg <Dennis.Wassenberg@secunet.com> Closes: https://lore.kernel.org/r/6de4b45ff2b32dd91a805ec02ec8ec73ef411bf6.camel@secunet.com/ Tested-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Raghavendra Rao Ananta authored
commit 54bbee19 upstream. DDI0487K.a D13.3.1 describes the PMU overflow condition, which evaluates to true if any counter's global enable (PMCR_EL0.E), overflow flag (PMOVSSET_EL0[n]), and interrupt enable (PMINTENSET_EL1[n]) are all 1. Of note, this does not require a counter to be enabled (i.e. PMCNTENSET_EL0[n] = 1) to generate an overflow. Align kvm_pmu_overflow_status() with the reality of the architecture and stop using PMCNTENSET_EL0 as part of the overflow condition. The bug was discovered while running an SBSA PMU test [*], which only sets PMCR.E, PMOVSSET<0>, PMINTENSET<0>, and expects an overflow interrupt. Cc: stable@vger.kernel.org Fixes: 76d883c4 ("arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register") Link: https://github.com/ARM-software/sbsa-acs/blob/master/test_pool/pmu/operating_system/test_pmu001.c Signed-off-by:
Raghavendra Rao Ananta <rananta@google.com> [ oliver: massaged changelog ] Reviewed-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20241120005230.2335682-2-oliver.upton@linux.dev Signed-off-by:
Oliver Upton <oliver.upton@linux.dev> Signed-off-by:
-
Eric Biggers authored
commit 3b2f2d22 upstream. Fix the AEGIS assembly code to access 'unsigned int' arguments as 32-bit values instead of 64-bit, since the upper bits of the corresponding 64-bit registers are not guaranteed to be zero. Note: there haven't been any reports of this bug actually causing incorrect behavior. Neither gcc nor clang guarantee zero-extension to 64 bits, but zero-extension is likely to happen in practice because most instructions that operate on 32-bit registers zero-extend to 64 bits. Fixes: 1d373d4e ("crypto: x86 - Add optimized AEGIS implementations") Cc: stable@vger.kernel.org Reviewed-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Adrian Hunter authored
commit 5b590160 upstream. If the trace data buffer becomes full, a truncated flag [T] is reported in PERF_RECORD_AUX. In some cases, the size reported is 0, even though data must have been added to make the buffer full. That happens when the buffer fills up from empty to full before the Intel PT driver has updated the buffer position. Then the driver calculates the new buffer position before calculating the data size. If the old and new positions are the same, the data size is reported as 0, even though it is really the whole buffer size. Fix by detecting when the buffer position is wrapped, and adjust the data size calculation accordingly. Example Use a very small buffer size (8K) and observe the size of truncated [T] data. Before the fix, it is possible to see records of 0 size. Before: $ perf record -m,8K -e intel_pt// uname Linux [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.105 MB perf.data ] $ perf script -D --no-itrace | grep AUX | grep -F '[T]' Warning: AUX data lost 2 times out of 3! 5 19462712368111 0x19710 [0x40]: PERF_RECORD_AUX offset: 0 size: 0 flags: 0x1 [T] 5 19462712700046 0x19ba8 [0x40]: PERF_RECORD_AUX offset: 0x170 size: 0xe90 flags: 0x1 [T] After: $ perf record -m,8K -e intel_pt// uname Linux [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.040 MB perf.data ] $ perf script -D --no-itrace | grep AUX | grep -F '[T]' Warning: AUX data lost 2 times out of 3! 1 113720802995 0x4948 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x2000 flags: 0x1 [T] 1 113720979812 0x6b10 [0x40]: PERF_RECORD_AUX offset: 0x2000 size: 0x2000 flags: 0x1 [T] Fixes: 52ca9ced ("perf/x86/intel/pt: Add Intel PT PMU driver") Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20241022155920.17511-2-adrian.hunter@intel.com Signed-off-by:
-
Qiu-ji Chen authored
commit 11577333 upstream. An atomicity violation occurs when the validity of the variables da7219->clk_src and da7219->mclk_rate is being assessed. Since the entire assessment is not protected by a lock, the da7219 variable might still be in flux during the assessment, rendering this check invalid. To fix this issue, we recommend adding a lock before the block if ((da7219->clk_src == clk_id) && (da7219->mclk_rate == freq)) so that the legitimacy check for da7219->clk_src and da7219->mclk_rate is protected by the lock, ensuring the validity of the check. This possible bug is found by an experimental static analysis tool developed by our team. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. Fixes: 6d817c0e ("ASoC: codecs: Add da7219 codec driver") Cc: stable@vger.kernel.org Signed-off-by:
Qiu-ji Chen <chenqiuji666@gmail.com> Link: https://patch.msgid.link/20240930101216.23723-1-chenqiuji666@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Artem Sadovnikov authored
commit d9f9d961 upstream. Commit 7c55b788 ("jfs: xattr: fix buffer overflow for invalid xattr") also addresses this issue but it only fixes it for positive values, while ea_size is an integer type and can take negative values, e.g. in case of a corrupted filesystem. This still breaks validation and would overflow because of implicit conversion from int to size_t in print_hex_dump(). Fix this issue by clamping the ea_size value instead. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Cc: stable@vger.kernel.org Signed-off-by:
Artem Sadovnikov <ancowi69@gmail.com> Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by:
-
Theodore Ts'o authored
commit 4a622e4d upstream. The original implementation ext4's FS_IOC_GETFSMAP handling only worked when the range of queried blocks included at least one free (unallocated) block range. This is because how the metadata blocks were emitted was as a side effect of ext4_mballoc_query_range() calling ext4_getfsmap_datadev_helper(), and that function was only called when a free block range was identified. As a result, this caused generic/365 to fail. Fix this by creating a new function ext4_getfsmap_meta_helper() which gets called so that blocks before the first free block range in a block group can get properly reported. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
Jeongjun Park authored
commit 902cc179 upstream. find_group_other() and find_group_orlov() read *_lo, *_hi with ext4_free_inodes_count without additional locking. This can cause data-race warning, but since the lock is held for most writes and free inodes value is generally not a problem even if it is incorrect, it is more appropriate to use READ_ONCE()/WRITE_ONCE() than to add locking. ================================================================== BUG: KCSAN: data-race in ext4_free_inodes_count / ext4_free_inodes_set write to 0xffff88810404300e of 2 bytes by task 6254 on cpu 1: ext4_free_inodes_set+0x1f/0x80 fs/ext4/super.c:405 __ext4_new_inode+0x15ca/0x2200 fs/ext4/ialloc.c:1216 ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391 vfs_symlink+0xca/0x1d0 fs/namei.c:4615 do_symlinkat+0xe3/0x340 fs/namei.c:4641 __do_sys_symlinkat fs/namei.c:4657 [inline] __se_sys_symlinkat fs/namei.c:4654 [inline] __x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654 x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff88810404300e of 2 bytes by task 6257 on cpu 0: ext4_free_inodes_count+0x1c/0x80 fs/ext4/super.c:349 find_group_other fs/ext4/ialloc.c:594 [inline] __ext4_new_inode+0x6ec/0x2200 fs/ext4/ialloc.c:1017 ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391 vfs_symlink+0xca/0x1d0 fs/namei.c:4615 do_symlinkat+0xe3/0x340 fs/namei.c:4641 __do_sys_symlinkat fs/namei.c:4657 [inline] __se_sys_symlinkat fs/namei.c:4654 [inline] __x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654 x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: stable@vger.kernel.org Signed-off-by:
Jeongjun Park <aha310510@gmail.com> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Link: https://patch.msgid.link/20241003125337.47283-1-aha310510@gmail.com Signed-off-by:
-
Benoît Sevens authored
commit b909df18 upstream. A bogus device can provide a bNumConfigurations value that exceeds the initial value used in usb_get_configuration for allocating dev->config. This can lead to out-of-bounds accesses later, e.g. in usb_destroy_configuration. Signed-off-by:
Benoît Sevens <bsevens@google.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable@kernel.org Link: https://patch.msgid.link/20241120124144.3814457-1-bsevens@google.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Manikanta Mylavarapu authored
commit 128fdbf3 upstream. In success case, the revision holds a non-null pointer. The current logic incorrectly returns an error for a non-null pointer, whereas it should return an error for a null pointer. The socinfo driver for IPQ9574 and IPQ5332 is currently broken, resulting in the following error message qcom-socinfo qcom-socinfo: probe with driver qcom-socinfo failed with error -12 Add a null check for the revision to ensure it returns an error only in failure case (null pointer). Fixes: e694d2b5 ("soc: qcom: Add check devm_kasprintf() returned value") Signed-off-by:
Manikanta Mylavarapu <quic_mmanikan@quicinc.com> Reviewed-by:
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20241016144852.2888679-1-quic_mmanikan@quicinc.com Signed-off-by:
Bjorn Andersson <andersson@kernel.org> Signed-off-by:
-
Vitalii Mordan authored
commit 40c97482 upstream. If the clock sehci->clk was not enabled in spear_ehci_hcd_drv_probe, it should not be disabled in any path. Conversely, if it was enabled in spear_ehci_hcd_drv_probe, it must be disabled in all error paths to ensure proper cleanup. Found by Linux Verification Center (linuxtesting.org) with Klever. Fixes: 7675d6ba ("USB: EHCI: make ehci-spear a separate driver") Cc: stable@vger.kernel.org Signed-off-by:
Vitalii Mordan <mordan@ispras.ru> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20241114230310.432213-1-mordan@ispras.ru Signed-off-by:
-
Qiu-ji Chen authored
commit afc545da381ba0c651b2658966ac737032676f01 upstream. This patch fixes an issue in the function xenbus_dev_probe(). In the xenbus_dev_probe() function, within the if (err) branch at line 313, the program incorrectly returns err directly without releasing the resources allocated by err = drv->probe(dev, id). As the return value is non-zero, the upper layers assume the processing logic has failed. However, the probe operation was performed earlier without a corresponding remove operation. Since the probe actually allocates resources, failing to perform the remove operation could lead to problems. To fix this issue, we followed the resource release logic of the xenbus_dev_remove() function by adding a new block fail_remove before the fail_put block. After entering the branch if (err) at line 313, the function will use a goto statement to jump to the fail_remove block, ensuring that the previously acquired resources are correctly released, thus preventing the reference count leak. This bug was identified by an experimental static analysis tool developed by our team. The tool specializes in analyzing reference count operations and detecting potential issues where resources are not properly managed. In this case, the tool flagged the missing release operation as a potential problem, which led to the development of this patch. Fixes: 4bac07c9 ("xen: add the Xenbus sysfs and virtual device hotplug driver") Cc: stable@vger.kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com> Message-ID: <20241105130919.4621-1-chenqiuji666@gmail.com> Signed-off-by:
-
chao liu authored
[ Upstream commit 9b897132 ] Multiple profiles shared 'ent->caps', so some logs missed. Fixes: 0ed3b28a ("AppArmor: mediation of non file objects") Signed-off-by:
chao liu <liuzgyid@outlook.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kailang Yang authored
[ Upstream commit cc3d0b5d ] Old procedure has a chance to meet Headphone no output. Fixes: 4a219ef8 ("ALSA: hda/realtek - Add ALC256 HP depop function") Signed-off-by:
Kailang Yang <kailang@realtek.com> Link: https://lore.kernel.org/463c5f93715d4714967041a0a8cec28e@realtek.com Signed-off-by:
-
Kailang Yang authored
[ Upstream commit 99cee034 ] Add independent type for ALC287. Signed-off-by:
-
Johan Hovold authored
[ Upstream commit d38be702 ] TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. The xmit_fifo_size parameter could be used to set the hardware transmit fifo size of a legacy UART when it could not be detected, but the interface is limited to eight bits and should be left unset when not used. Similarly, baud_base could be used to set the UART base clock when it could not be detected but might as well be left unset when it is not known. The type parameter could be used to set the UART type, but is better left unspecified (type unknown) when it isn't used. Note that some applications have historically expected TIOCGSERIAL to be implemented, but judging from the Debian sources, the port type not being PORT_UNKNOWN is only used to check for the existence of legacy serial ports (ttySn). Notably USB serial drivers like ftdi_sio have been using PORT_UNKNOWN for twenty years without any problems. Drop the bogus values provided by the greybus implementation. Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210407102334.32361-8-johan@kernel.org Signed-off-by:
-
Jinjie Ruan authored
[ Upstream commit 3c5d8b81 ] The pm_runtime_disable() is missing in probe error path, so add it to fix it. Fixes: 92b1f84d ("drivers/misc: driver for APDS990X ALS and proximity sensors") Signed-off-by:
-
Edward Adam Davis authored
[ Upstream commit d73dc7b1 ] [Syzbot reported two possible deadlocks] The first possible deadlock is: WARNING: possible recursive locking detected 6.12.0-rc1-syzkaller-00027-g4a9fe2a8ac53 #0 Not tainted -------------------------------------------- syz-executor363/2651 is trying to acquire lock: ffffffff89b120e8 (chaoskey_list_lock){+.+.}-{3:3}, at: chaoskey_release+0x15d/0x2c0 drivers/usb/misc/chaoskey.c:322 but task is already holding lock: ffffffff89b120e8 (chaoskey_list_lock){+.+.}-{3:3}, at: chaoskey_release+0x7f/0x2c0 drivers/usb/misc/chaoskey.c:299 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(chaoskey_list_lock); lock(chaoskey_list_lock); *** DEADLOCK *** The second possible deadlock is: WARNING: possible circular locking dependency detected 6.12.0-rc1-syzkaller-00027-g4a9fe2a8ac53 #0 Not tainted ------------------------------------------------------ kworker/0:2/804 is trying to acquire lock: ffffffff899dadb0 (minor_rwsem){++++}-{3:3}, at: usb_deregister_dev+0x7c/0x1e0 drivers/usb/core/file.c:186 but task is already holding lock: ffffffff89b120e8 (chaoskey_list_lock){+.+.}-{3:3}, at: chaoskey_disconnect+0xa8/0x2a0 drivers/usb/misc/chaoskey.c:235 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (chaoskey_list_lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x175/0x9c0 kernel/locking/mutex.c:752 chaoskey_open+0xdd/0x220 drivers/usb/misc/chaoskey.c:274 usb_open+0x186/0x220 drivers/usb/core/file.c:47 chrdev_open+0x237/0x6a0 fs/char_dev.c:414 do_dentry_open+0x6cb/0x1390 fs/open.c:958 vfs_open+0x82/0x3f0 fs/open.c:1088 do_open fs/namei.c:3774 [inline] path_openat+0x1e6a/0x2d60 fs/namei.c:3933 do_filp_open+0x1dc/0x430 fs/namei.c:3960 do_sys_openat2+0x17a/0x1e0 fs/open.c:1415 do_sys_open fs/open.c:1430 [inline] __do_sys_openat fs/open.c:1446 [inline] __se_sys_openat fs/open.c:1441 [inline] __x64_sys_openat+0x175/0x210 fs/open.c:1441 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (minor_rwsem){++++}-{3:3}: check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain kernel/locking/lockdep.c:3904 [inline] __lock_acquire+0x250b/0x3ce0 kernel/locking/lockdep.c:5202 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5825 down_write+0x93/0x200 kernel/locking/rwsem.c:1577 usb_deregister_dev+0x7c/0x1e0 drivers/usb/core/file.c:186 chaoskey_disconnect+0xb7/0x2a0 drivers/usb/misc/chaoskey.c:236 usb_unbind_interface+0x1e8/0x970 drivers/usb/core/driver.c:461 device_remove drivers/base/dd.c:569 [inline] device_remove+0x122/0x170 drivers/base/dd.c:561 __device_release_driver drivers/base/dd.c:1273 [inline] device_release_driver_internal+0x44a/0x610 drivers/base/dd.c:1296 bus_remove_device+0x22f/0x420 drivers/base/bus.c:576 device_del+0x396/0x9f0 drivers/base/core.c:3864 usb_disable_device+0x36c/0x7f0 drivers/usb/core/message.c:1418 usb_disconnect+0x2e1/0x920 drivers/usb/core/hub.c:2304 hub_port_connect drivers/usb/core/hub.c:5361 [inline] hub_port_connect_change drivers/usb/core/hub.c:5661 [inline] port_event drivers/usb/core/hub.c:5821 [inline] hub_event+0x1bed/0x4f40 drivers/usb/core/hub.c:5903 process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(chaoskey_list_lock); lock(minor_rwsem); lock(chaoskey_list_lock); lock(minor_rwsem); *** DEADLOCK *** [Analysis] The first is AA lock, it because wrong logic, it need a unlock. The second is AB lock, it needs to rearrange the order of lock usage. Fixes: 422dc0a4 ("USB: chaoskey: fail open after removal") Reported-by:
<syzbot+685e14d04fe35692d3bc@syzkaller.appspotmail.com> Reported-by:
<syzbot+1f8ca5ee82576ec01f12@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=685e14d04fe35692d3bc Signed-off-by:
Edward Adam Davis <eadavis@qq.com> Tested-by:
<syzbot+5f1ce62e956b7b19610e@syzkaller.appspotmail.com> Tested-by:
-
Oliver Neukum authored
[ Upstream commit 422dc0a4 ] chaoskey_open() takes the lock only to increase the counter of openings. That means that the mutual exclusion with chaoskey_disconnect() cannot prevent an increase of the counter and chaoskey_open() returning a success. If that race is hit, chaoskey_disconnect() will happily free all resources associated with the device after it has dropped the lock, as it has read the counter as zero. To prevent this race chaoskey_open() has to check the presence of the device under the lock. However, the current per device lock cannot be used, because it is a part of the data structure to be freed. Hence an additional global mutex is needed. The issue is as old as the driver. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by:
<syzbot+422188bce66e76020e55@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=422188bce66e76020e55 Fixes: 66e3e591 ("usb: Add driver for Altus Metrum ChaosKey device (v2)") Rule: add Link: https://lore.kernel.org/stable/20241002132201.552578-1-oneukum%40suse.com Link: https://lore.kernel.org/r/20241002132201.552578-1-oneukum@suse.com Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit e0aa9614 ] The IO yurex_write() needs to wait for in order to have a device ready for writing again can take a long time time. Consequently the sleep is done in an interruptible state. Therefore others waiting for yurex_write() itself to finish should use mutex_lock_interruptible. Signed-off-by:
-
Jeongjun Park authored
[ Upstream commit 44feafba ] iowarrior_read() uses the iowarrior dev structure, but does not use any lock on the structure. This can cause various bugs including data-races, so it is more appropriate to use a mutex lock to safely protect the iowarrior dev structure. When using a mutex lock, you should split the branch to prevent blocking when the O_NONBLOCK flag is set. In addition, it is unnecessary to check for NULL on the iowarrior dev structure obtained by reading file->private_data. Therefore, it is better to remove the check. Fixes: 946b960d ("USB: add driver for iowarrior devices.") Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit a4b7064d ] If i2c_smbus_write_byte_data() fails in al3010_init(), al3010_set_pwr(false) is not called. In order to avoid such a situation, move the devm_add_action_or_reset() witch calls al3010_set_pwr(false) right after a successful al3010_set_pwr(true). Fixes: c36b5195 ("iio: light: add Dyna-Image AL3010 driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/ee5d10a2dd2b70f29772d5df33774d3974a80f30.1725993353.git.christophe.jaillet@wanadoo.fr Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit fc9c273d ] Similar to the previous patch, plumb the RCU lock inside the ipmr_get_table(), provided a lockless variant and apply the latter in the few spots were the lock is already held. Fixes: 709b46e8 ("net: Add compat ioctl support for the ipv4 multicast ioctl SIOCGETSGCNT") Fixes: f0ad0860 ("ipv4: ipmr: support multiple tables") Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit b96ef16d ] We can use standard rcu_read_lock(), to get rid of last read_lock(&mrt_lock) call points. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Stable-dep-of: fc9c273d ("ipmr: fix tables suspicious RCU usage") Signed-off-by:
-
Saravanan Vajravel authored
[ Upstream commit 5311598f ] After successful PCIe AER recovery, FW will reset all resource reservations. If it is IF_UP, the driver will call bnxt_open() and all resources will be reserved again. It it is IF_DOWN, we should call bnxt_reserve_rings() so that we can reserve resources including RoCE resources to allow RoCE to resume after AER. Without this patch, RoCE fails to resume in this IF_DOWN scenario. Later, if it becomes IF_UP, bnxt_open() will see that resources have been reserved and will not reserve again. Fixes: fb1e6e56 ("bnxt_en: Fix AER recovery.") Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
Saravanan Vajravel <saravanan.vajravel@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9cfb5e7f ] Following sequence in hsr_init_sk() is invalid : skb_reset_mac_header(skb); skb_reset_mac_len(skb); skb_reset_network_header(skb); skb_reset_transport_header(skb); It is invalid because skb_reset_mac_len() needs the correct network header, which should be after the mac header. This patch moves the skb_reset_network_header() and skb_reset_transport_header() before the call to dev_hard_header(). As a result skb->mac_len is no longer set to a value close to 65535. Fixes: 48b491a5 ("net: hsr: fix mac_len checks") Signed-off-by:
-
Alexander Lobakin authored
[ Upstream commit 6f1c0ea1 ] Introduce a new netdev feature, NETIF_F_GRO_UDP_FWD, to allow user to turn UDP GRO on and off for forwarding. Defaults to off to not change current datapath. Suggested-by:
Alexander Lobakin <alobakin@pm.me> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 9cfb5e7f ("net: hsr: fix hsr_init_sk() vs network/transport headers.") Signed-off-by:
-
Csókás, Bence authored
[ Upstream commit 2ac40e6d ] `atmel_qspi_reg_name()` is used for pretty-printing register offsets for verbose logging of register accesses. However, due to a typo (likely a copy-paste error), QSPI_RD's offset prints as "MR", the name of the previous register. Fix this typo. Fixes: c528ecfb ("spi: atmel-quadspi: Add verbose debug facilities to monitor register accesses") Signed-off-by:
Csókás, Bence <csokas.bence@prolan.hu> Reviewed-by:
Alexander Dahl <ada@thorsis.com> Link: https://patch.msgid.link/20241122141302.2599636-1-csokas.bence@prolan.hu Signed-off-by:
-
Maxime Chevallier authored
[ Upstream commit 407618d6 ] On DWMAC3 and later, there's a RX Watchdog interrupt that's used for interrupt coalescing. It's known to be buggy on some platforms, and dwmac-socfpga appears to be one of them. Changing the interrupt coalescing from ethtool doesn't appear to have any effect here. Without disabling RIWT (Received Interrupt Watchdog Timer, I believe...), we observe latencies while receiving traffic that amount to around ~0.4ms. This was discovered with NTP but can be easily reproduced with a simple ping. Without this patch : 64 bytes from 192.168.5.2: icmp_seq=1 ttl=64 time=0.657 ms With this patch : 64 bytes from 192.168.5.2: icmp_seq=1 ttl=64 time=0.254 ms Fixes: 801d233b ("net: stmmac: Add SOCFPGA glue driver") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20241122141256.764578-1-maxime.chevallier@bootlin.com Signed-off-by:
-
Vitalii Mordan authored
[ Upstream commit b032ae57 ] If the clock pep->clk was not enabled in pxa168_eth_probe, it should not be disabled in any path. Conversely, if it was enabled in pxa168_eth_probe, it must be disabled in all error paths to ensure proper cleanup. Use the devm_clk_get_enabled helper function to ensure proper call balance for pep->clk. Found by Linux Verification Center (linuxtesting.org) with Klever. Fixes: a49f37ee ("net: add Fast Ethernet driver for PXA168.") Signed-off-by:
-
Oleksij Rempel authored
[ Upstream commit e863ff80 ] Validate Wake-on-LAN (WoL) options in `lan78xx_set_wol` before calling `usb_autopm_get_interface`. This prevents USB autopm refcounting issues and ensures the adapter can properly enter autosuspend when invalid WoL options are provided. Fixes: eb9ad088 ("lan78xx: Check for supported Wake-on-LAN modes") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://patch.msgid.link/20241118140351.2398166-1-o.rempel@pengutronix.de Signed-off-by:
-
Pavan Chebbi authored
[ Upstream commit 614f4d16 ] The hardware on Broadcom 1G chipsets have a known limitation where they cannot handle DMA addresses that cross over 4GB. When such an address is encountered, the hardware sets the address overflow error bit in the DMA status register and triggers a reset. However, BCM57766 hardware is setting the overflow bit and triggering a reset in some cases when there is no actual underlying address overflow. The hardware team analyzed the issue and concluded that it is happening when the status block update has an address with higher (b16 to b31) bits as 0xffff following a previous update that had lowest bits as 0xffff. To work around this bug in the BCM57766 hardware, set the coherent dma mask from the current 64b to 31b. This will ensure that upper bits of the status block DMA address are always at most 0x7fff, thus avoiding the improper overflow check described above. This work around is intended for only status block and ring memories and has no effect on TX and RX buffers as they do not require coherent memory. Fixes: 72f2afb8 ("[TG3]: Add DMA address workaround") Reported-by:
Salam Noureddine <noureddine@arista.com> Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by:
Michal Kubiak <michal.kubiak@intel.com> Link: https://patch.msgid.link/20241119055741.147144-1-pavan.chebbi@broadcom.com Signed-off-by:
-
Oleksij Rempel authored
[ Upstream commit ae7370e6 ] Add calls to `phy_device_free` after `fixed_phy_unregister` to fix a memory leak that occurs when the device is unplugged. This ensures proper cleanup of pseudo fixed-link PHYs. Fixes: 89b36fb5 ("lan78xx: Lan7801 Support for Fixed PHY") Cc: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by:
-
Barnabás Czémán authored
[ Upstream commit 34f99d3b ] Correct bq27426 registers, according to technical reference manual it does not have Design Capacity register so it is not register compatible with bq27421. Fixes: 5ef6a160 ("power: supply: bq27xxx: Add support for BQ27426") Signed-off-by:
Barnabás Czémán <barnabas.czeman@mainlining.org> Link: https://lore.kernel.org/r/20241016-fix_bq27426-v2-1-aa6c0f51a9f6@mainlining.org Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
