Select Git revision
Search by author
- Any Author
- authors
-
72162444 72162444 gaochangning
-
Aakash Dave aakash.dave
-
Aaron Kim akim
-
Aaron Kloc akloc
-
Aaron Lan aaron.lan
-
Aaron Nabil aaronna
-
Aaron Pohle aaron.pohle
-
Abbott Chung chung.abbott
-
Abdallah Omar abdallah_omar
-
Abdessamii Chalbi abdessamii.chalbi
-
Abdul Hussain Sirajudeen abdul.hussain
-
Abdullah Alghamdi a.alghamdi
-
Abdullah Elmarghany abdullah_elmarghany
-
Abel Fang abel_fang
-
Abel Vesa
abel.vesa
-
Abhijeet Badurkar abhijeet.badurkar
-
Abhijit Adsule adsule
-
Abhijit Murthy abhijit
-
Abhi Khanal akhanal
-
Abhilash Sahoo abhilashsahoo
- Dec 14, 2024
-
-
Liequan Che authored
commit b2e382ae upstream. Commit 028ddcac ("bcache: Remove unnecessary NULL point check in node allocations") leads a NULL pointer deference in cache_set_flush(). 1721 if (!IS_ERR_OR_NULL(c->root)) 1722 list_add(&c->root->list, &c->btree_cache); >From the above code in cache_set_flush(), if previous registration code fails before allocating c->root, it is possible c->root is NULL as what it is initialized. __bch_btree_node_alloc() never returns NULL but c->root is possible to be NULL at above line 1721. This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this. Fixes: 028ddcac ("bcache: Remove unnecessary NULL point check in node allocations") Signed-off-by:
Liequan Che <cheliequan@inspur.com> Cc: stable@vger.kernel.org Cc: Zheng Wang <zyytlz.wz@163.com> Reviewed-by:
Mingzhe Zou <mingzhe.zou@easystack.cn> Signed-off-by:
Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20241202115638.28957-1-colyli@suse.de Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ryusuke Konishi authored
commit 985ebec4 upstream. Syzbot reported that when searching for records in a directory where the inode's i_size is corrupted and has a large value, memory access outside the folio/page range may occur, or a use-after-free bug may be detected if KASAN is enabled. This is because nilfs_last_byte(), which is called by nilfs_find_entry() and others to calculate the number of valid bytes of directory data in a page from i_size and the page index, loses the upper 32 bits of the 64-bit size information due to an inappropriate type of local variable to which the i_size value is assigned. This caused a large byte offset value due to underflow in the end address calculation in the calling nilfs_find_entry(), resulting in memory access that exceeds the folio/page size. Fix this issue by changing the type of the local variable causing the bit loss from "unsigned int" to "u64". The return value of nilfs_last_byte() is also of type "unsigned int", but it is truncated so as not to exceed PAGE_SIZE and no bit loss occurs, so no change is required. Link: https://lkml.kernel.org/r/20241119172403.9292-1-konishi.ryusuke@gmail.com Fixes: 2ba466d7 ("nilfs2: directory entry operations") Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by:
<syzbot+96d5d14c47d97015c624@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=96d5d14c47d97015c624 Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Saurav Kashyap authored
commit 833c70e2 upstream. Firmware supports multiple sg_cnt for request and response for CT commands, so remove the redundant check. A check is there where sg_cnt for request and response should be same. This is not required as driver and FW have code to handle multiple and different sg_cnt on request and response. Cc: stable@vger.kernel.org Signed-off-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20241115130313.46826-5-njavali@marvell.com Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Quinn Tran authored
commit 07c903db upstream. System crash is observed with stack trace warning of use after free. There are 2 signals to tell dpc_thread to terminate (UNLOADING flag and kthread_stop). On setting the UNLOADING flag when dpc_thread happens to run at the time and sees the flag, this causes dpc_thread to exit and clean up itself. When kthread_stop is called for final cleanup, this causes use after free. Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop as the main signal to exit dpc_thread. [596663.812935] kernel BUG at mm/slub.c:294! [596663.812950] invalid opcode: 0000 [#1] SMP PTI [596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1 [596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [596663.812974] RIP: 0010:__slab_free+0x17d/0x360 ... [596663.813008] Call Trace: [596663.813022] ? __dentry_kill+0x121/0x170 [596663.813030] ? _cond_resched+0x15/0x30 [596663.813034] ? _cond_resched+0x15/0x30 [596663.813039] ? wait_for_completion+0x35/0x190 [596663.813048] ? try_to_wake_up+0x63/0x540 [596663.813055] free_task+0x5a/0x60 [596663.813061] kthread_stop+0xf3/0x100 [596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx] Cc: stable@vger.kernel.org Signed-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Anil Gurumurthy authored
commit e4e268f8 upstream. The fc_function_template for vports was missing the .show_host_supported_speeds. The base port had the same. Add .show_host_supported_speeds to the vport template as well. Cc: stable@vger.kernel.org Fixes: 2c3dfe3f ("[SCSI] qla2xxx: add support for NPIV") Signed-off-by:
Anil Gurumurthy <agurumurthy@marvell.com> Signed-off-by:
-
Quinn Tran authored
commit 4812b779 upstream. NVMe controller fails to send connect command due to failure to locate hw context buffer for NVMe queue 0 (blk_mq_hw_ctx, hctx_idx=0). The cause of the issue is NPIV host did not initialize the vha->irq_offset field. This field is given to blk-mq (blk_mq_pci_map_queues) to help locate the beginning of IO Queues which in turn help locate NVMe queue 0. Initialize this field to allow NVMe to work properly with NPIV host. kernel: nvme nvme5: Connect command failed, errno: -18 kernel: nvme nvme5: qid 0: secure concatenation is not supported kernel: nvme nvme5: NVME-FC{5}: create_assoc failed, assoc_id 2e9100 ret 401 kernel: nvme nvme5: NVME-FC{5}: reset: Reconnect attempt failed (401) kernel: nvme nvme5: NVME-FC{5}: Reconnect attempt in 2 seconds Cc: stable@vger.kernel.org Fixes: f0783d43 ("scsi: qla2xxx: Use correct number of vectors for online CPUs") Signed-off-by:
-
Sahas Leelodharry authored
commit e2974a22 upstream. Fixes the 3.5mm headphone jack on the Samsung Galaxy Book 3 360 NP730QFG laptop. Unlike the other Galaxy Book3 series devices, this device only needs the ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET quirk. Verified changes on the device and compared with codec state in Windows. [ white-space fixes by tiwai ] Signed-off-by:
Sahas Leelodharry <sahas.leelodharry@mail.mcgill.ca> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/QB1PR01MB40047D4CC1282DB7F1333124CC352@QB1PR01MB4004.CANPRD01.PROD.OUTLOOK.COM Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Nazar Bilinskyi authored
commit 3a83f7ba upstream. HP ProBook 430 G8 has a mute and micmute LEDs that can be made to work using quirk ALC236_FIXUP_HP_GPIO_LED. Enable already existing quirk. Signed-off-by:
Nazar Bilinskyi <nbilinskyi@gmail.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20241130231631.8929-1-nbilinskyi@gmail.com Signed-off-by:
-
Marie Ramlow authored
commit a7de2b87 upstream. The Corsair HS80 RGB Wireless is a USB headset with a mic and a sidetone feature. It has the same quirk as the Virtuoso series. This labels the mixers appropriately, so applications don't move the sidetone volume when they actually intend to move the main headset volume. Signed-off-by:
Marie Ramlow <me@nycode.dev> cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20241130165240.17838-1-me@nycode.dev Signed-off-by:
-
Mark Rutland authored
commit ca62d900 upstream. Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently tagged_addr_ctrl_set() will consume an arbitrary value, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and rejects other values, a partial SETREGSET attempt will randomly succeed or fail depending on the value of the uninitialized value, and the exposure is significantly limited. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing value of the tagged address ctrl will be retained. The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the user_aarch64_view used by a native AArch64 task to manipulate another native AArch64 task. As get_tagged_addr_ctrl() only returns an error value when called for a compat task, tagged_addr_ctrl_get() and tagged_addr_ctrl_set() should never observe an error value from get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that such an error would be unexpected, and error handlnig is not missing in either case. Fixes: 2200aa71 ("arm64: mte: ptrace: Add NT_ARM_TAGGED_ADDR_CTRL regset") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241205121655.1824269-2-mark.rutland@arm.com Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Kuan-Wei Chiu authored
commit e63fbd5f upstream. The cmp_entries_dup() function used as the comparator for sort() violated the symmetry and transitivity properties required by the sorting algorithm. Specifically, it returned 1 whenever memcmp() was non-zero, which broke the following expectations: * Symmetry: If x < y, then y > x. * Transitivity: If x < y and y < z, then x < z. These violations could lead to incorrect sorting and failure to correctly identify duplicate elements. Fix the issue by directly returning the result of memcmp(), which adheres to the required comparison properties. Cc: stable@vger.kernel.org Fixes: 08d43a5f ("tracing: Add lock-free tracing_map") Link: https://lore.kernel.org/20241203202228.1274403-1-visitorckw@gmail.com Signed-off-by:
Kuan-Wei Chiu <visitorckw@gmail.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
-
Alexander Sverdlin authored
commit 4962ee04 upstream. Currently "timeout-sec" Device Tree property is being silently ignored: even though watchdog_init_timeout() is being used, the driver always passes "heartbeat" == DEFAULT_HEARTBEAT == 60 as argument. Fix this by setting struct watchdog_device::timeout to DEFAULT_HEARTBEAT and passing real module parameter value to watchdog_init_timeout() (which may now be 0 if not specified). Cc: stable@vger.kernel.org Fixes: 2d63908b ("watchdog: Add K3 RTI watchdog support") Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by:
Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20241107203830.1068456-1-alexander.sverdlin@siemens.com Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
WangYuli authored
commit 59548215 upstream. Due to incorrect dev->product reporting by certain devices, null pointer dereferences occur when dev->product is empty, leading to potential system crashes. This issue was found on EXCELSIOR DL37-D05 device with Loongson-LS3A6000-7A2000-DL37 motherboard. Kernel logs: [ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci [ 56.671638] usb 4-3: string descriptor 0 read error: -22 [ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07 [ 56.671647] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 56.678839] hid-generic 0003:056A:0374.0004: hiddev0,hidraw3: USB HID v1.10 Device [HID 056a:0374] on usb-0000:00:05.0-3/input0 [ 56.697719] CPU 2 Unable to handle kernel paging request at virtual address 0000000000000000, era == 90000000066e35c8, ra == ffff800004f98a80 [ 56.697732] Oops[#1]: [ 56.697734] CPU: 2 PID: 2742 Comm: (udev-worker) Tainted: G OE 6.6.0-loong64-desktop #25.00.2000.015 [ 56.697737] Hardware name: Inspur CE520L2/C09901N000000000, BIOS 2.09.00 10/11/2024 [ 56.697739] pc 90000000066e35c8 ra ffff800004f98a80 tp 9000000125478000 sp 900000012547b8a0 [ 56.697741] a0 0000000000000000 a1 ffff800004818b28 a2 0000000000000000 a3 0000000000000000 [ 56.697743] a4 900000012547b8f0 a5 0000000000000000 a6 0000000000000000 a7 0000000000000000 [ 56.697745] t0 ffff800004818b2d t1 0000000000000000 t2 0000000000000003 t3 0000000000000005 [ 56.697747] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000 [ 56.697748] t8 0000000000000000 u0 0000000000000000 s9 0000000000000000 s0 900000011aa48028 [ 56.697750] s1 0000000000000000 s2 0000000000000000 s3 ffff800004818e80 s4 ffff800004810000 [ 56.697751] s5 90000001000b98d0 s6 ffff800004811f88 s7 ffff800005470440 s8 0000000000000000 [ 56.697753] ra: ffff800004f98a80 wacom_update_name+0xe0/0x300 [wacom] [ 56.697802] ERA: 90000000066e35c8 strstr+0x28/0x120 [ 56.697806] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 56.697816] PRMD: 0000000c (PPLV0 +PIE +PWE) [ 56.697821] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 56.697827] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) [ 56.697831] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 56.697835] BADV: 0000000000000000 [ 56.697836] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 56.697838] Modules linked in: wacom(+) bnep bluetooth rfkill qrtr nls_iso8859_1 nls_cp437 snd_hda_codec_conexant snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore input_leds mousedev led_class joydev deepin_netmonitor(OE) fuse nfnetlink dmi_sysfs ip_tables x_tables overlay amdgpu amdxcp drm_exec gpu_sched drm_buddy radeon drm_suballoc_helper i2c_algo_bit drm_ttm_helper r8169 ttm drm_display_helper spi_loongson_pci xhci_pci cec xhci_pci_renesas spi_loongson_core hid_generic realtek gpio_loongson_64bit [ 56.697887] Process (udev-worker) (pid: 2742, threadinfo=00000000aee0d8b4, task=00000000a9eff1f3) [ 56.697890] Stack : 0000000000000000 ffff800004817e00 0000000000000000 0000251c00000000 [ 56.697896] 0000000000000000 00000011fffffffd 0000000000000000 0000000000000000 [ 56.697901] 0000000000000000 1b67a968695184b9 0000000000000000 90000001000b98d0 [ 56.697906] 90000001000bb8d0 900000011aa48028 0000000000000000 ffff800004f9d74c [ 56.697911] 90000001000ba000 ffff800004f9ce58 0000000000000000 ffff800005470440 [ 56.697916] ffff800004811f88 90000001000b98d0 9000000100da2aa8 90000001000bb8d0 [ 56.697921] 0000000000000000 90000001000ba000 900000011aa48028 ffff800004f9d74c [ 56.697926] ffff8000054704e8 90000001000bb8b8 90000001000ba000 0000000000000000 [ 56.697931] 90000001000bb8d0 9000000006307564 9000000005e666e0 90000001752359b8 [ 56.697936] 9000000008cbe400 900000000804d000 9000000005e666e0 0000000000000000 [ 56.697941] ... [ 56.697944] Call Trace: [ 56.697945] [<90000000066e35c8>] strstr+0x28/0x120 [ 56.697950] [<ffff800004f98a80>] wacom_update_name+0xe0/0x300 [wacom] [ 56.698000] [<ffff800004f9ce58>] wacom_parse_and_register+0x338/0x900 [wacom] [ 56.698050] [<ffff800004f9d74c>] wacom_probe+0x32c/0x420 [wacom] [ 56.698099] [<9000000006307564>] hid_device_probe+0x144/0x260 [ 56.698103] [<9000000005e65d68>] really_probe+0x208/0x540 [ 56.698109] [<9000000005e661dc>] __driver_probe_device+0x13c/0x1e0 [ 56.698112] [<9000000005e66620>] driver_probe_device+0x40/0x100 [ 56.698116] [<9000000005e6680c>] __device_attach_driver+0x12c/0x180 [ 56.698119] [<9000000005e62bc8>] bus_for_each_drv+0x88/0x160 [ 56.698123] [<9000000005e66468>] __device_attach+0x108/0x260 [ 56.698126] [<9000000005e63918>] device_reprobe+0x78/0x100 [ 56.698129] [<9000000005e62a68>] bus_for_each_dev+0x88/0x160 [ 56.698132] [<9000000006304e54>] __hid_bus_driver_added+0x34/0x80 [ 56.698134] [<9000000005e62bc8>] bus_for_each_drv+0x88/0x160 [ 56.698137] [<9000000006304df0>] __hid_register_driver+0x70/0xa0 [ 56.698142] [<9000000004e10fe4>] do_one_initcall+0x104/0x320 [ 56.698146] [<9000000004f38150>] do_init_module+0x90/0x2c0 [ 56.698151] [<9000000004f3a3d8>] init_module_from_file+0xb8/0x120 [ 56.698155] [<9000000004f3a590>] idempotent_init_module+0x150/0x3a0 [ 56.698159] [<9000000004f3a890>] sys_finit_module+0xb0/0x140 [ 56.698163] [<900000000671e4e8>] do_syscall+0x88/0xc0 [ 56.698166] [<9000000004e12404>] handle_syscall+0xc4/0x160 [ 56.698171] Code: 0011958f 00150224 5800cd85 <2a00022c> 00150004 4000c180 0015022c 03400000 03400000 [ 56.698192] ---[ end trace 0000000000000000 ]--- Fixes: 09dc28ac ("HID: wacom: Improve generic name generation") Reported-by:
Zhenxing Chen <chenzhenxing@uniontech.com> Co-developed-by:
Xu Rao <raoxu@uniontech.com> Signed-off-by:
WangYuli <wangyuli@uniontech.com> Link: https://patch.msgid.link/B31757FE8E1544CF+20241125052616.18261-1-wangyuli@uniontech.com Cc: stable@vger.kernel.org Signed-off-by:
Benjamin Tissoires <bentiss@kernel.org> Signed-off-by:
-
Hou Tao authored
[ Upstream commit 27abc7b3 ] trie_get_next_key() uses node->prefixlen == key->prefixlen to identify an exact match, However, it is incorrect because when the target key doesn't fully match the found node (e.g., node->prefixlen != matchlen), these two nodes may also have the same prefixlen. It will return expected result when the passed key exist in the trie. However when a recently-deleted key or nonexistent key is passed to trie_get_next_key(), it may skip keys and return incorrect result. Fix it by using node->prefixlen == matchlen to identify exact matches. When the condition is true after the search, it also implies node->prefixlen equals key->prefixlen, otherwise, the search would return NULL instead. Fixes: b471f2f1 ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map") Reviewed-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20241206110622.1161752-6-houtao@huaweicloud.com Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hou Tao authored
[ Upstream commit eae6a075 ] Add the currently missing handling for the BPF_EXIST and BPF_NOEXIST flags. These flags can be specified by users and are relevant since LPM trie supports exact matches during update. Fixes: b95a5c4d ("bpf: add a longest prefix match trie map implementation") Reviewed-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Tetsuo Handa authored
[ Upstream commit 965b5dd1 ] syzbot is reporting busy inodes after unmount, for commit 9c89fe0a ("ocfs2: Handle error from dquot_initialize()") forgot to call iput() when new_inode() succeeded and dquot_initialize() failed. Link: https://lkml.kernel.org/r/e68c0224-b7c6-4784-b4fa-a9fc8c675525@I-love.SAKURA.ne.jp Fixes: 9c89fe0a ("ocfs2: Handle error from dquot_initialize()") Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
<syzbot+0af00f6a2cba2058b5db@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=0af00f6a2cba2058b5db Tested-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Pei Xiao authored
[ Upstream commit 98483662 ] If we remove the module which will call mpc52xx_spi_remove it will free 'ms' through spi_unregister_controller. while the work ms->work will be used. The sequence of operations that may lead to a UAF bug. Fix it by ensuring that the work is canceled before proceeding with the cleanup in mpc52xx_spi_remove. Fixes: ca632f55 ("spi: reorganize drivers") Signed-off-by:
Pei Xiao <xiaopei01@kylinos.cn> Link: https://patch.msgid.link/1f16f8ae0e50ca9adb1dc849bf2ac65a40c9ceb9.1732783000.git.xiaopei01@kylinos.cn Signed-off-by:
-
Zijian Zhang authored
[ Upstream commit ca70b8ba ] The current sk memory accounting logic in __SK_REDIRECT is pre-uncharging tosend bytes, which is either msg->sg.size or a smaller value apply_bytes. Potential problems with this strategy are as follows: - If the actual sent bytes are smaller than tosend, we need to charge some bytes back, as in line 487, which is okay but seems not clean. - When tosend is set to apply_bytes, as in line 417, and (ret < 0), we may miss uncharging (msg->sg.size - apply_bytes) bytes. [...] 415 tosend = msg->sg.size; 416 if (psock->apply_bytes && psock->apply_bytes < tosend) 417 tosend = psock->apply_bytes; [...] 443 sk_msg_return(sk, msg, tosend); 444 release_sock(sk); 446 origsize = msg->sg.size; 447 ret = tcp_bpf_sendmsg_redir(sk_redir, redir_ingress, 448 msg, tosend, flags); 449 sent = origsize - msg->sg.size; [...] 454 lock_sock(sk); 455 if (unlikely(ret < 0)) { 456 int free = sk_msg_free_nocharge(sk, msg); 458 if (!cork) 459 *copied -= free; 460 } [...] 487 if (eval == __SK_REDIRECT) 488 sk_mem_charge(sk, tosend - sent); [...] When running the selftest test_txmsg_redir_wait_sndmem with txmsg_apply, the following warning will be reported: ------------[ cut here ]------------ WARNING: CPU: 6 PID: 57 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x190/0x1a0 Modules linked in: CPU: 6 UID: 0 PID: 57 Comm: kworker/6:0 Not tainted 6.12.0-rc1.bm.1-amd64+ #43 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: events sk_psock_destroy RIP: 0010:inet_sock_destruct+0x190/0x1a0 RSP: 0018:ffffad0a8021fe08 EFLAGS: 00010206 RAX: 0000000000000011 RBX: ffff9aab4475b900 RCX: ffff9aab481a0800 RDX: 0000000000000303 RSI: 0000000000000011 RDI: ffff9aab4475b900 RBP: ffff9aab4475b990 R08: 0000000000000000 R09: ffff9aab40050ec0 R10: 0000000000000000 R11: ffff9aae6fdb1d01 R12: ffff9aab49c60400 R13: ffff9aab49c60598 R14: ffff9aab49c60598 R15: dead000000000100 FS: 0000000000000000(0000) GS:ffff9aae6fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffec7e47bd8 CR3: 00000001a1a1c004 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x89/0x130 ? inet_sock_destruct+0x190/0x1a0 ? report_bug+0xfc/0x1e0 ? handle_bug+0x5c/0xa0 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? inet_sock_destruct+0x190/0x1a0 __sk_destruct+0x25/0x220 sk_psock_destroy+0x2b2/0x310 process_scheduled_works+0xa3/0x3e0 worker_thread+0x117/0x240 ? __pfx_worker_thread+0x10/0x10 kthread+0xcf/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- In __SK_REDIRECT, a more concise way is delaying the uncharging after sent bytes are finalized, and uncharge this value. When (ret < 0), we shall invoke sk_msg_free. Same thing happens in case __SK_DROP, when tosend is set to apply_bytes, we may miss uncharging (msg->sg.size - apply_bytes) bytes. The same warning will be reported in selftest. [...] 468 case __SK_DROP: 469 default: 470 sk_msg_free_partial(sk, msg, tosend); 471 sk_msg_apply_bytes(psock, tosend); 472 *copied -= (tosend + delta); 473 return -EACCES; [...] So instead of sk_msg_free_partial we can do sk_msg_free here. Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Fixes: 8ec95b94 ("bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues") Signed-off-by:
Zijian Zhang <zijianzhang@bytedance.com> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20241016234838.3167769-3-zijianzhang@bytedance.com Signed-off-by:
-
Pei Xiao authored
[ Upstream commit 86e8f947 ] Sparse complains about incorrect type in argument 1. expected void const volatile __iomem *ptr but got void *. so modify mixer_dbg_mxn's addr parameter. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202411191809.6V3c826r-lkp@intel.com/ Fixes: a5f81078 ("drm/sti: add debugfs entries for MIXER crtc") Signed-off-by:
Raphael Gallais-Pou <rgallaispou@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/c28f0dcb6a4526721d83ba1f659bba30564d3d54.1732087094.git.xiaopei01@kylinos.cn Signed-off-by:
Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by:
-
Frank Li authored
[ Upstream commit 851bd21c ] If the DTS contains 'assigned-address', a dynamic address leak occurs during hotjoin events. Assume a device have assigned-address 0xb. - Device issue Hotjoin - Call i3c_master_do_daa() - Call driver xxx_do_daa() - Call i3c_master_get_free_addr() to get dynamic address 0x9 - i3c_master_add_i3c_dev_locked(0x9) - expected_dyn_addr = newdev->boardinfo->init_dyn_addr (0xb); - i3c_master_reattach_i3c_dev(newdev(0xb), old_dyn_addr(0x9)); - if (dev->info.dyn_addr != old_dyn_addr && ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 0xb != 0x9 -> TRUE (!dev->boardinfo || ^^^^^^^^^^^^^^^ -> FALSE dev->info.dyn_addr != dev->boardinfo->init_dyn_addr)) { ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 0xb != 0xb -> FALSE ... i3c_bus_set_addr_slot_status(&master->bus, old_dyn_addr, I3C_ADDR_SLOT_FREE); ^^^ This will be skipped. So old_dyn_addr never free } - i3c_master_get_free_addr() will return increased sequence number. Remove dev->info.dyn_addr != dev->boardinfo->init_dyn_addr condition check. dev->info.dyn_addr should be checked before calling this function because i3c_master_setnewda_locked() has already been called and the target device has already accepted dyn_addr. It is too late to check if dyn_addr is free in i3c_master_reattach_i3c_dev(). Add check to ensure expected_dyn_addr is free before i3c_master_setnewda_locked(). Fixes: cc3a392d ("i3c: master: fix for SETDASA and DAA process") Cc: stable@kernel.org Reviewed-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-3-4098b8bde01e@nxp.com Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Frank Li authored
[ Upstream commit 2f552fa2 ] Extend the address status bit to 4 and introduce the I3C_ADDR_SLOT_EXT_DESIRED macro to indicate that a device prefers a specific address. This is generally set by the 'assigned-address' in the device tree source (dts) file. ┌────┬─────────────┬───┬─────────┬───┐ │S/Sr│ 7'h7E RnW=0 │ACK│ ENTDAA │ T ├────┐ └────┴─────────────┴───┴─────────┴───┘ │ ┌─────────────────────────────────────────┘ │ ┌──┬─────────────┬───┬─────────────────┬────────────────┬───┬─────────┐ └─►│Sr│7'h7E RnW=1 │ACK│48bit UID BCR DCR│Assign 7bit Addr│PAR│ ACK/NACK│ └──┴─────────────┴───┴─────────────────┴────────────────┴───┴─────────┘ Some master controllers (such as HCI) need to prepare the entire above transaction before sending it out to the I3C bus. This means that a 7-bit dynamic address needs to be allocated before knowing the target device's UID information. However, some I3C targets may request specific addresses (called as "init_dyn_addr"), which is typically specified by the DT-'s assigned-address property. Lower addresses having higher IBI priority. If it is available, i3c_bus_get_free_addr() preferably return a free address that is not in the list of desired addresses (called as "init_dyn_addr"). This allows the device with the "init_dyn_addr" to switch to its "init_dyn_addr" when it hot-joins the I3C bus. Otherwise, if the "init_dyn_addr" is already in use by another I3C device, the target device will not be able to switch to its desired address. If the previous step fails, fallback returning one of the remaining unassigned address, regardless of its state in the desired list. Reviewed-by:
-
Frank Li authored
[ Upstream commit 16aed0a6 ] Replace the hardcoded value 2, which indicates 2 bits for I3C address status, with the predefined macro I3C_ADDR_SLOT_STATUS_BITS. Improve maintainability and extensibility of the code. Reviewed-by:
-
Jamie Iles authored
[ Upstream commit f18f9811 ] The address slot bitmap is an array of unsigned long's which are the same size as an int on 32-bit platforms but not 64-bit. Loading the bitmap into an int could result in the incorrect status being returned for a slot and slots being reported as the wrong status. Fixes: 3a379bbc ("i3c: Add core I3C infrastructure") Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Jamie Iles <quic_jiles@quicinc.com> Signed-off-by:
-
Michal Simek authored
[ Upstream commit 12b3642b ] Code expects array only with 2 items which should be checked. But also item checking is not working as it should likely because of incorrect items description. Fixes: d50f974c ("dt-bindings: serial: Convert rs485 bindings to json-schema") Signed-off-by:
Michal Simek <michal.simek@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/820c639b9e22fe037730ed44d1b044cdb6d28b75.1726480384.git.michal.simek@amd.com Signed-off-by:
-
Lino Sanfilippo authored
[ Upstream commit 885dcb08 ] Currently the documentation claims that a maximum of 1000 msecs is allowed for RTS delays. However nothing actually checks the values read from device tree/ACPI and so it is possible to set much higher values. There is already a maximum of 100 ms enforced for RTS delays that are set via the UART TIOCSRS485 ioctl. To be consistent with that use the same limit for DT/ACPI values. Although this change is visible to userspace the risk of breaking anything when reducing the max delays from 1000 to 100 ms should be very low, since 100 ms is already a very high maximum for delays that are usually rather in the usecs range. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20220710164442.2958979-7-LinoSanfilippo@gmx.de Signed-off-by:
-
Charles Han authored
[ Upstream commit 050b23d0 ] devm_kasprintf() can return a NULL pointer on failure,but this returned value in grgpio_probe is not checked. Add NULL check in grgpio_probe, to handle kernel NULL pointer dereference error. Cc: stable@vger.kernel.org Fixes: 7eb6ce2f ("gpio: Convert to using %pOF instead of full_name") Signed-off-by:
Charles Han <hanchunchao@inspur.com> Link: https://lore.kernel.org/r/20241114091822.78199-1-hanchunchao@inspur.com Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by:
-
Bartosz Golaszewski authored
[ Upstream commit d036ae41 ] Instead of dereferencing the platform device pointer repeatedly, just store its address in a helper variable. Link: https://lore.kernel.org/r/20241015131832.44678-3-brgl@bgdev.pl Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 8588c99c ] We should not assume mac header is set in output path. Use skb_eth_hdr() instead of eth_hdr() to fix the issue. sysbot reported the following : WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 skb_mac_header include/linux/skbuff.h:3052 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 eth_hdr include/linux/if_ether.h:24 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit_skb drivers/net/geneve.c:898 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039 Modules linked in: CPU: 0 UID: 0 PID: 11635 Comm: syz.4.1423 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_mac_header include/linux/skbuff.h:3052 [inline] RIP: 0010:eth_hdr include/linux/if_ether.h:24 [inline] RIP: 0010:geneve_xmit_skb drivers/net/geneve.c:898 [inline] RIP: 0010:geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039 Code: 21 c6 02 e9 35 d4 ff ff e8 a5 48 4c fb 90 0f 0b 90 e9 fd f5 ff ff e8 97 48 4c fb 90 0f 0b 90 e9 d8 f5 ff ff e8 89 48 4c fb 90 <0f> 0b 90 e9 41 e4 ff ff e8 7b 48 4c fb 90 0f 0b 90 e9 cd e7 ff ff RSP: 0018:ffffc90003b2f870 EFLAGS: 00010283 RAX: 000000000000037a RBX: 000000000000ffff RCX: ffffc9000dc3d000 RDX: 0000000000080000 RSI: ffffffff86428417 RDI: 0000000000000003 RBP: ffffc90003b2f9f0 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff88806603c000 R13: 0000000000000000 R14: ffff8880685b2780 R15: 0000000000000e23 FS: 00007fdc2deed6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30a1dff8 CR3: 0000000056b8c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] __dev_direct_xmit+0x58a/0x720 net/core/dev.c:4490 dev_direct_xmit include/linux/netdevice.h:3181 [inline] packet_xmit+0x1e4/0x360 net/packet/af_packet.c:285 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x2700/0x5660 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] __sys_sendto+0x488/0x4f0 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0xe0/0x1c0 net/socket.c:2200 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: a025fb5f ("geneve: Allow configuration of DF behaviour") Reported-by:
<syzbot+3ec5271486d7cb2d242a@syzkaller.appspotmail.com> Closes: https://lore.kernel.org/netdev/674f4b72.050a0220.17bd51.004a.GAE@google.com/T/#u Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Link: https://patch.msgid.link/20241203182122.2725517-1-edumazet@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Kory Maincent authored
[ Upstream commit 910c4788 ] A bitset without mask in a _SET request means we want exactly the bits in the bitset to be set. This works correctly for compact format but when verbose format is parsed, ethnl_update_bitset32_verbose() only sets the bits present in the request bitset but does not clear the rest. The commit 66991703 ("ethtool: fix application of verbose no_mask bitset") fixes this issue by clearing the whole target bitmap before we start iterating. The solution proposed brought an issue with the behavior of the mod variable. As the bitset is always cleared the old value will always differ to the new value. Fix it by adding a new function to compare bitmaps and a temporary variable which save the state of the old bitmap. Fixes: 66991703 ("ethtool: fix application of verbose no_mask bitset") Signed-off-by:
Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20241202153358.1142095-1-kory.maincent@bootlin.com Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 7ffc7481 ] rhashtable does not provide stable walk, duplicated elements are possible in case of resizing. I considered that checking for errors when calling rhashtable_walk_next() was sufficient to detect the resizing. However, rhashtable_walk_next() returns -EAGAIN only at the end of the iteration, which is too late, because a gc work containing duplicated elements could have been already scheduled for removal to the worker. Add a u32 gc worker sequence number per set, bump it on every workqueue run. Annotate gc worker sequence number on the expired element. Use it to skip those already seen in this gc workqueue run. Note that this new field is never reset in case gc transaction fails, so next gc worker run on the expired element overrides it. Wraparound of gc worker sequence number should not be an issue with stale gc worker sequence number in the element, that would just postpone the element removal in one gc run. Note that it is not possible to use flags to annotate that element is pending gc run to detect duplicates, given that gc transaction can be invalidated in case of update from the control plane, therefore, not allowing to clear such flag. On x86_64, pahole reports no changes in the size of nft_rhash_elem. Fixes: f6c383b8 ("netfilter: nf_tables: adapt set backend to use GC transaction API") Reported-by:
Laurent Fasnacht <laurent.fasnacht@proton.ch> Tested-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Phil Sutter authored
[ Upstream commit 456f010b ] User space may unload ip_set.ko while it is itself requesting a set type backend module, leading to a kernel crash. The race condition may be provoked by inserting an mdelay() right after the nfnl_unlock() call. Fixes: a7b4f989 ("netfilter: ipset: IP set core support") Signed-off-by:
Phil Sutter <phil@nwl.cc> Acked-by:
Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by:
-
Xin Long authored
[ Upstream commit 29220780 ] When matching erspan_opt in cls_flower, only the (version, dir, hwid) fields are relevant. However, in fl_set_erspan_opt() it initializes all bits of erspan_opt and its mask to 1. This inadvertently requires packets to match not only the (version, dir, hwid) fields but also the other fields that are unexpectedly set to 1. This patch resolves the issue by ensuring that only the (version, dir, hwid) fields are configured in fl_set_erspan_opt(), leaving the other fields to 0 in erspan_opt. Fixes: 79b1011c ("net: sched: allow flower to match erspan options") Reported-by:
Shuang Li <shuali@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Yuan Can authored
[ Upstream commit 0566f83d ] The pci_register_driver() can fail and when this happened, the dca_notifier needs to be unregistered, otherwise the dca_notifier can be called when igb fails to install, resulting to invalid memory access. Fixes: bbd98fe4 ("igb: Fix DCA errors and do not use context index for 82576") Signed-off-by:
Yuan Can <yuancan@huawei.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Louis Leseur authored
[ Upstream commit 7a0ea70d ] Commit 43645ce0 ("qed: Populate nvm image attribute shadow.") added support for populating flash image attributes, notably "num_images". However, some cards were not able to return this information. In such cases, the driver would return EINVAL, causing the driver to exit. Add check to return EOPNOTSUPP instead of EINVAL when the card is not able to return these information. The caller function already handles EOPNOTSUPP without error. Fixes: 43645ce0 ("qed: Populate nvm image attribute shadow.") Co-developed-by:
Florian Forestier <florian@forestier.re> Signed-off-by:
Louis Leseur <louis.leseur@gmail.com> Link: https://patch.msgid.link/20241128083633.26431-1-louis.leseur@gmail.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit 6a2fa133 ] syzkaller reported a use-after-free of UDP kernel socket in cleanup_bearer() without repro. [0][1] When bearer_disable() calls tipc_udp_disable(), cleanup of the UDP kernel socket is deferred by work calling cleanup_bearer(). tipc_net_stop() waits for such works to finish by checking tipc_net(net)->wq_count. However, the work decrements the count too early before releasing the kernel socket, unblocking cleanup_net() and resulting in use-after-free. Let's move the decrement after releasing the socket in cleanup_bearer(). [0]: ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at sk_alloc+0x438/0x608 inet_create+0x4c8/0xcb0 __sock_create+0x350/0x6b8 sock_create_kern+0x58/0x78 udp_sock_create4+0x68/0x398 udp_sock_create+0x88/0xc8 tipc_udp_enable+0x5e8/0x848 __tipc_nl_bearer_enable+0x84c/0xed8 tipc_nl_bearer_enable+0x38/0x60 genl_family_rcv_msg_doit+0x170/0x248 genl_rcv_msg+0x400/0x5b0 netlink_rcv_skb+0x1dc/0x398 genl_rcv+0x44/0x68 netlink_unicast+0x678/0x8b0 netlink_sendmsg+0x5e4/0x898 ____sys_sendmsg+0x500/0x830 [1]: BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline] BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 udp_hashslot include/net/udp.h:85 [inline] udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 sk_common_release+0xaf/0x3f0 net/core/sock.c:3820 inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437 inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489 __sock_release net/socket.c:658 [inline] sock_release+0xa0/0x210 net/socket.c:686 cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 Uninit was created at: slab_free_hook mm/slub.c:2269 [inline] slab_free mm/slub.c:4580 [inline] kmem_cache_free+0x207/0xc40 mm/slub.c:4682 net_free net/core/net_namespace.c:454 [inline] cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c #7 91723d6f74857f70725e1583cba3cf4adc716cfa Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: events cleanup_bearer Fixes: 26abe143 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.") Reported-by:
syzkaller <syzkaller@googlegroups.com> Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20241127050512.28438-1-kuniyu@amazon.com Signed-off-by:
-
Ivan Solodovnikov authored
[ Upstream commit 22be4727 ] If dccp_feat_push_confirm() fails after new value for SP feature was accepted without reconciliation ('entry == NULL' branch), memory allocated for that value with dccp_feat_clone_sp_val() is never freed. Here is the kmemleak stack for this: unreferenced object 0xffff88801d4ab488 (size 8): comm "syz-executor310", pid 1127, jiffies 4295085598 (age 41.666s) hex dump (first 8 bytes): 01 b4 4a 1d 80 88 ff ff ..J..... backtrace: [<00000000db7cabfe>] kmemdup+0x23/0x50 mm/util.c:128 [<0000000019b38405>] kmemdup include/linux/string.h:465 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:371 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:367 [inline] [<0000000019b38405>] dccp_feat_change_recv net/dccp/feat.c:1145 [inline] [<0000000019b38405>] dccp_feat_parse_options+0x1196/0x2180 net/dccp/feat.c:1416 [<00000000b1f6d94a>] dccp_parse_options+0xa2a/0x1260 net/dccp/options.c:125 [<0000000030d7b621>] dccp_rcv_state_process+0x197/0x13d0 net/dccp/input.c:650 [<000000001f74c72e>] dccp_v4_do_rcv+0xf9/0x1a0 net/dccp/ipv4.c:688 [<00000000a6c24128>] sk_backlog_rcv include/net/sock.h:1041 [inline] [<00000000a6c24128>] __release_sock+0x139/0x3b0 net/core/sock.c:2570 [<00000000cf1f3a53>] release_sock+0x54/0x1b0 net/core/sock.c:3111 [<000000008422fa23>] inet_wait_for_connect net/ipv4/af_inet.c:603 [inline] [<000000008422fa23>] __inet_stream_connect+0x5d0/0xf70 net/ipv4/af_inet.c:696 [<0000000015b6f64d>] inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:735 [<0000000010122488>] __sys_connect_file+0x15c/0x1a0 net/socket.c:1865 [<00000000b4b70023>] __sys_connect+0x165/0x1a0 net/socket.c:1882 [<00000000f4cb3815>] __do_sys_connect net/socket.c:1892 [inline] [<00000000f4cb3815>] __se_sys_connect net/socket.c:1889 [inline] [<00000000f4cb3815>] __x64_sys_connect+0x6e/0xb0 net/socket.c:1889 [<00000000e7b1e839>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 [<0000000055e91434>] entry_SYSCALL_64_after_hwframe+0x67/0xd1 Clean up the allocated memory in case of dccp_feat_push_confirm() failure and bail out with an error reset code. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: e77b8363 ("dccp: Process incoming Change feature-negotiation options") Signed-off-by:
Ivan Solodovnikov <solodovnikov.ia@phystech.edu> Link: https://patch.msgid.link/20241126143902.190853-1-solodovnikov.ia@phystech.edu Signed-off-by:
-
Jiri Wiesner authored
[ Upstream commit 3301ab7d ] Dst objects get leaked in ip6_negative_advice() when this function is executed for an expired IPv6 route located in the exception table. There are several conditions that must be fulfilled for the leak to occur: * an ICMPv6 packet indicating a change of the MTU for the path is received, resulting in an exception dst being created * a TCP connection that uses the exception dst for routing packets must start timing out so that TCP begins retransmissions * after the exception dst expires, the FIB6 garbage collector must not run before TCP executes ip6_negative_advice() for the expired exception dst When TCP executes ip6_negative_advice() for an exception dst that has expired and if no other socket holds a reference to the exception dst, the refcount of the exception dst is 2, which corresponds to the increment made by dst_init() and the increment made by the TCP socket for which the connection is timing out. The refcount made by the socket is never released. The refcount of the dst is decremented in sk_dst_reset() but that decrement is counteracted by a dst_hold() intentionally placed just before the sk_dst_reset() in ip6_negative_advice(). After ip6_negative_advice() has finished, there is no other object tied to the dst. The socket lost its reference stored in sk_dst_cache and the dst is no longer in the exception table. The exception dst becomes a leaked object. As a result of this dst leak, an unbalanced refcount is reported for the loopback device of a net namespace being destroyed under kernels that do not contain e5f80fcf ("ipv6: give an IPv6 dev to blackhole_netdev"): unregister_netdevice: waiting for lo to become free. Usage count = 2 Fix the dst leak by removing the dst_hold() in ip6_negative_advice(). The patch that introduced the dst_hold() in ip6_negative_advice() was 92f1655a ("net: fix __dst_negative_advice() race"). But 92f1655a merely refactored the code with regards to the dst refcount so the issue was present even before 92f1655a. The bug was introduced in 54c1a859 ("ipv6: Don't drop cache route entry unless timer actually expired.") where the expired cached route is deleted and the sk_dst_cache member of the socket is set to NULL by calling dst_negative_advice() but the refcount belonging to the socket is left unbalanced. The IPv4 version - ipv4_negative_advice() - is not affected by this bug. When the TCP connection times out ipv4_negative_advice() merely resets the sk_dst_cache of the socket while decrementing the refcount of the exception dst. Fixes: 92f1655a ("net: fix __dst_negative_advice() race") Fixes: 54c1a859 ("ipv6: Don't drop cache route entry unless timer actually expired.") Link: https://lore.kernel.org/netdev/20241113105611.GA6723@incl/T/#u Signed-off-by:
Jiri Wiesner <jwiesner@suse.de> Reviewed-by:
-
Dmitry Antipov authored
[ Upstream commit a8c69500 ] Since j1939_session_skb_queue() does an extra skb_get() for each new skb, do the same for the initial one in j1939_session_new() to avoid refcount underflow. Reported-by:
<syzbot+d4e8dc385d9258220c31@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=d4e8dc385d9258220c31 Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Tested-by:
Oleksij Rempel <o.rempel@pengutronix.de> Acked-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit b9653d19 ] syzbot is able to feed a packet with 14 bytes, pretending it is a vlan one. Since fill_frame_info() is relying on skb->mac_len already, extend the check to cover this case. BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:709 [inline] BUG: KMSAN: uninit-value in hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 fill_frame_info net/hsr/hsr_forward.c:709 [inline] hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 hsr_dev_xmit+0x2f0/0x350 net/hsr/hsr_device.c:235 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3606 __dev_queue_xmit+0x366a/0x57d0 net/core/dev.c:4434 dev_queue_xmit include/linux/netdevice.h:3168 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x91ae/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] alloc_skb_with_frags+0xc8/0xd00 net/core/skbuff.c:6612 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2881 packet_alloc_skb net/packet/af_packet.c:2995 [inline] packet_snd net/packet/af_packet.c:3089 [inline] packet_sendmsg+0x74c6/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 48b491a5 ("net: hsr: fix mac_len checks") Reported-by:
<syzbot+671e2853f9851d039551@syzkaller.appspotmail.com> Closes: https://lore.kernel.org/netdev/6745dc7f.050a0220.21d33d.0018.GAE@google.com/T/#u Signed-off-by:
-
Martin Ottens authored
[ Upstream commit 1596a135 ] When the length of a GSO packet in the tbf qdisc is larger than the burst size configured the packet will be segmented by the tbf_segment function. Whenever this function is used to enqueue SKBs, the backlog statistic of the tbf is not increased correctly. This can lead to underflows of the 'backlog' byte-statistic value when these packets are dequeued from tbf. Reproduce the bug: Ensure that the sender machine has GSO enabled. Configured the tbf on the outgoing interface of the machine as follows (burstsize = 1 MTU): $ tc qdisc add dev <oif> root handle 1: tbf rate 50Mbit burst 1514 latency 50ms Send bulk TCP traffic out via this interface, e.g., by running an iPerf3 client on this machine. Check the qdisc statistics: $ tc -s qdisc show dev <oif> The 'backlog' byte-statistic has incorrect values while traffic is transferred, e.g., high values due to u32 underflows. When the transfer is stopped, the value is != 0, which should never happen. This patch fixes this bug by updating the statistics correctly, even if single SKBs of a GSO SKB cannot be enqueued. Fixes: e43ac79a ("sch_tbf: segment too big GSO packets") Signed-off-by:
Martin Ottens <martin.ottens@fau.de> Reviewed-by:
-
