Merge tag 'u-boot-stm32-20241218' of https://source.denx.de/u-boot/custodians/u-boot-stm

CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/23931

- Restore SPL boot from sdcard for STM32MP1 platforms
- Fix STACK_SIZE for STM32 MCU's board

Kconfig

@@ -578,6 +578,7 @@ config STACK_SIZE
 	hex "Define max stack size that can be used by U-Boot"
 	default 0x4000000 if ARCH_VERSAL_NET || ARCH_VERSAL || ARCH_ZYNQMP
 	default 0x200000 if MICROBLAZE
+	default 0x4000 if ARCH_STM32
 	default 0x1000000
 	help
 	  Define Max stack size that can be used by U-Boot. This value is used

arch/arm/dts/stm32mp15-u-boot.dtsi

@@ -186,6 +186,9 @@
 	bootph-all;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&clk_hse>, <&clk_hsi>, <&clk_csi>,
+		 <&clk_lse>, <&clk_lsi>;
 };
 
 &usart1 {

arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi

@@ -112,6 +112,10 @@
 };
 
 &rcc {
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&clk_hse>, <&clk_hsi>, <&clk_csi>,
+		 <&clk_lse>, <&clk_lsi>;
+
 	st,clksrc = <
 		CLK_MPU_PLL1P
 		CLK_AXI_PLL2P

configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig

@@ -27,6 +27,9 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x3
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y

configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig

@@ -27,6 +27,9 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x3
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y

configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig

@@ -27,6 +27,9 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x3
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y

configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig

@@ -27,6 +27,9 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x3
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y

configs/stm32mp15_basic_defconfig

@@ -38,6 +38,9 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x3
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MTD=y

configs/stm32mp15_dhcom_basic_defconfig

@@ -7,5 +7,4 @@ CONFIG_SYS_MEMTEST_START=0xc0000000
 CONFIG_SYS_MEMTEST_END=0xc4000000
 CONFIG_SYS_I2C_EEPROM_BUS=3
 CONFIG_OF_LIST="st/stm32mp157c-dhcom-pdk2 st/stm32mp153c-dhcom-drc02 st/stm32mp157c-dhcom-picoitx"
-CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
 CONFIG_SYS_I2C_EEPROM_ADDR=0x50

configs/stm32mp15_dhcor_basic_defconfig

@@ -5,7 +5,6 @@ CONFIG_ARCH_STM32MP=y
 CONFIG_DEFAULT_DEVICE_TREE="st/stm32mp157a-dhcor-avenger96"
 CONFIG_SYS_I2C_EEPROM_BUS=2
 CONFIG_OF_LIST="st/stm32mp157a-dhcor-avenger96 st/stm32mp151a-dhcor-testbench st/stm32mp153c-dhcor-drc-compact"
-CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
 CONFIG_SYS_I2C_EEPROM_ADDR=0x53
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y

configs/stm32mp15_dhsom.config

@@ -22,6 +22,7 @@ CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_HWSPINLOCK_STM32=y
 CONFIG_KS8851_MLL=y
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks access-controllers"
 CONFIG_PHY_ANEG_TIMEOUT=20000
 CONFIG_PINCTRL_STMFX=y
 CONFIG_REMOTEPROC_STM32_COPRO=y
@@ -57,11 +58,14 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_STACK=0x30000000
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
 CONFIG_SPL_TEXT_BASE=0x2FFC2500
 CONFIG_SPL_USB_GADGET=y
 CONFIG_STM32_ADC=y
 CONFIG_SYSRESET_SYSCON=y
 CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x3
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
 CONFIG_SYS_MALLOC_F_LEN=0x3000
 CONFIG_SYS_PBSIZE=1050
 CONFIG_PREBOOT="run dh_preboot"