WIP: arm64: dts: qcom: x1e80100: Add IRIS video codec

Add the IRIS video codec to accelerate video decoding/encoding. Copied
mostly from sm8550.dtsi, the only difference is a slightly lower frequency
for the Turbo L1 level in the OPP table.

TODO: Add separate qcom,x1e80100-iris compatible.

Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>

arch/arm64/boot/dts/qcom/x1e80100.dtsi

@@ -4660,6 +4660,76 @@ usb_1_ss1_dwc3_ss: endpoint {
 			};
 		};
 
+		iris: video-codec@aa00000 {
+			compatible = "qcom,sm8550-iris";
+
+			reg = <0 0x0aa00000 0 0xf0000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+					<&videocc VIDEO_CC_MVS0_GDSC>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_MMCX>;
+			power-domain-names = "venus", "vcodec0", "mxc", "mmcx";
+			operating-points-v2 = <&iris_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface", "core", "vcodec0_core";
+
+			interconnects =
+				<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+				 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ALWAYS>,
+				<&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS
+				 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-cfg", "video-mem";
+
+			/* FW load region */
+			memory-region = <&video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+			reset-names = "bus";
+
+			iommus = <&apps_smmu 0x1940 0x0000>,
+				 <&apps_smmu 0x1947 0x0000>;
+			dma-coherent;
+
+			iris_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_low_svs>;
+				};
+
+				opp-338000000 {
+					opp-hz = /bits/ 64 <338000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_svs>;
+				};
+
+				opp-366000000 {
+					opp-hz = /bits/ 64 <366000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_turbo>,
+							<&rpmhpd_opp_turbo>;
+				};
+
+				opp-481000000 {
+					opp-hz = /bits/ 64 <481000000>;
+					required-opps = <&rpmhpd_opp_turbo_l1>,
+							<&rpmhpd_opp_turbo_l1>;
+				};
+			};
+		};
+
 		videocc: clock-controller@aaf0000 {
 			compatible = "qcom,x1e80100-videocc";
 			reg = <0 0x0aaf0000 0 0x10000>;