Restore EPC at the branch whose delay slot is emulated if the delay-slot
instruction signals.  This is so that code in `fpu_emulator_cop1Handler'
does not see EPC having advanced and mistakenly successfully resume
userland execution from the location at the branch target in that case.
Restoring EPC guarantees an immediate exit from the emulation loop and
if EPC hasn't advanced at all since entering the loop, also issuing the
signal reported by the delay-slot instruction.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9701/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Correct ISA requirements for floating-point instructions:

* the CU3 exception signifies a real COP3 instruction in MIPS I & II,

* the BC1FL and BC1TL instructions are not supported in MIPS I,

* the SQRT.fmt instructions are indeed supported in MIPS II,

* the LDC1 and SDC1 instructions are indeed supported in MIPS32r1,

* the CEIL.W.fmt, FLOOR.W.fmt, ROUND.W.fmt and TRUNC.W.fmt instructions
  are indeed supported in MIPS32,

* the CVT.L.fmt and CVT.fmt.L instructions are indeed supported in
  MIPS32r2 and MIPS32r6,

* the CEIL.L.fmt, FLOOR.L.fmt, ROUND.L.fmt and TRUNC.L.fmt instructions
  are indeed supported in MIPS32r2 and MIPS32r6,

* the RSQRT.fmt and RECIP.fmt instructions are indeed supported in
  MIPS64r1,

Also simplify conditionals for MIPS III and MIPS IV FPU instructions and
the handling of the MOVCI minor opcode.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9700/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Implement the correct ordering of individual floating-point registers
within double-precision register pairs for the MIPS I FP context, as
required by our FP emulation code and expected by userland talking via
ptrace(2).  Use L.D and S.D assembly macros that do the right thing like
LDC1 and SDC1 from MIPS II up, avoiding the need to mess up with
endianness conditionals.

This in particular fixes the handling of denormals and NaN generation in
Unimplemented Operation emulation traps.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9699/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Correct a cache coherency regression introduced with be1664c4 [Another
round of fixes for the fp emulator.] for the emulation frame used in
delay-slot emulation.

Two instructions are copied into the frame and as from the commit
referred a cache synchronisation call is made for the second instruction
aka `badinst' of the two only.  The `flush_cache_sigtramp' interface is
reused that guarantees that synchronisation will be made for 8 bytes or
2 instructions starting from the address requested, although if cache
lines are wider then a larger area may be synchronised.

Change the call to point to the first of the two instructions aka `emul'
instead, removing unpredictable behaviour resulting from cache
incoherency.

This bug only ever manifested itself on systems implementing 4-byte
cache lines, typically MIPS I systems, causing all kinds of weirdness.
This is because the sequence of two instructions starting from `emul' is
8-byte aligned and for 8-byte or wider cache lines the line synchronised
will span both, so the vast majority of systems have escaped unharmed.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9698/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Do not lose the other half of the BREAK code where there is an upper
half.  This is so that e.g. `BREAK 7, 7' is not interpreted as a divide
by zero trap, while `BREAK 0, 7' or `BREAK 7, 0' still are.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9697/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add the missing microMIPS BREAK16 instruction code interpretation and
reshape code removing instruction fetching duplication and the separate
call to `do_trap_or_bp' in the MIPS16 path.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9696/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Correct the interpretation of the immediate MIPS16 BREAK instruction
code embedded in the instruction word across bits 10:5 rather than 11:6
as current code implies, fixing the interpretation of integer overflow
and divide by zero traps.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9695/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The `cpu_has_fpu' feature flag must not be hardcoded to 1 or the `nofpu'
kernel option will be ignored.  Remove any such overrides and add a
cautionary note.  Hardcoding to 0 is fine for FPU-less platforms.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9694/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The `ieee754sp_isnan' and `ieee754dp_isnan' NaN classifiers are now no
longer externally referred, remove their header prototypes and make them
local to the two only respective places still making use of them.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9693/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Rewrite qNaN handling in `ieee754sp_fdp' using the `ieee754_class_nan'
helper recently added, removing the external call to `ieee754sp_isnan'
and reducing the size of code by 16 instructions or 64 bytes.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9692/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

None of the comparison helpers in ieee754.h is used, remove them.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9691/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Remove a redundant call to `ieee754_setandtestcx' in `ieee754sp_cmp' and
`ieee754dp_cmp'.  The IEEE 754 exception requested will have already
been set by a call to `ieee754_setcx' immediately above, because `sig'
has to be non-zero to reach here, and the comparison result returned
will be 0 regardless of the result from the call.  Simplify the return
expression remaining.  All this reducing the size of code by 16 and 12
instructions or 64 and 48 bytes respectively.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9690/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

We have the input operands already classified in `ieee754sp_cmp' and
`ieee754dp_cmp' comparison operations, so use the class obtained to tell
NaNs and numbers apart rather than classifying inputs again for this
purpose, reducing the size of code by 24 and 40 instructions or 96 and
160 bytes respectively.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9689/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Revert the changes made by commit fdffbafb [Lots of FPU bug fixes from
Kjeld Borch Egevang.] to `ieee754sp_nanxcpt' and `ieee754dp_nanxcpt'
sNaN quieting handlers and their callers so that sNaN processing is done
within the handlers againg.  Pass the sNaN causing an IEEE 754 invalid
operation exception down to the relevant handler.  Pass the sNaN in `fs'
where two sNaNs are supplied to a binary operation.

Set the Invalid Operation FCSR exception bits in the quieting handlers
rather than at their call sites throughout.  Make the handlers exclusive
for sNaN processing.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9688/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Don't call the `ieee754sp_nanxcpt' and `ieee754dp_nanxcpt' sNaN quieting
handlers for a qNaN supplied to floating-point format conversions or
SQRT.S/SQRT.D instructions, or for a qNaN produced out of a negative
operand supplied to SQRT.S/SQRT.D instructions.  Return the qNaN right
away in these cases.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9687/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9686/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Commit fdffbafb [Lots of FPU bug fixes from Kjeld Borch Egevang.]
replaced the two single `ieee754sp_nanxcpt' and `ieee754dp_nanxcpt'
places, where sNaN quieting used to happen for single and double
floating-point operations respectively, with individual qNaN
instantiations across all the call sites instead.  It also made most of
these two functions dead code as where called on a qNaN they return
right away.

To revert the damage and make sNaN quieting uniform again first rewrite
`ieee754sp_nanxcpt' and `ieee754dp_nanxcpt' to do the same quieting all
the call sites do, that is return the default qNaN encoding for all
input sNaN values; never propagate any sNaN payload bits from its
trailing significand field.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9685/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Replace a hardcoded numeric bitmask for FCSR cause bits with
`FPU_CSR_ALL_X' in `__build_clear_fpe'.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9684/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Changes applied to `do_cpu' over time reduced the use of the SIGILL
issued with `force_sig' at the end to a single CU3 case only in the
switch statement there.  Move that `force_sig' call over to right where
required then and toss out the pile of gotos now not needed to skip over
the call, replacing them with regular breaks out of the switch.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9683/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Move CFC1/CTC1 emulation code to separate functions to avoid excessive
indentation in forthcoming changes.  Adjust formatting in a minor way
and remove extraneous round brackets.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9682/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

GCC is smart enough to substitute the final result for FLS calculations
as implemented in the fallback C code we have in `__fls' and `fls'
applied to constant values.  The presence of inline asm defeats the
compiler though, forcing it to emit extraneous CLZ/DCLZ calculation for
processors that support these instructions.

Use `__builtin_constant_p' then to avoid inline asm altogether for
constants.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9681/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Commit 56a64733 [MIPS: math-emu: Switch to using the MIPS rounding
modes.] removed the distinction between hardware and emulator rounding
mode encodings, the hardware encoding is now used in emulation as well.
Complement the change and remove the `modeindex' macro previously used
for indexing into encoding translation tables, it now does nothing and
only obfuscates code by reinserting the value extracted from FCSR.
Adjust comments accordingly.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9680/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Fold a nested `if' statement for the R6 case in `do_ri' into its
containing `if' block, removing excessive indentation causing code to
extend beyond 79 columns.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9679/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Use `static inline' rather than `static __maybe_unused' for
`mipsr2_decoder' in the empty case, making inlining explicit where it
will happen anyway.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9678/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Commit 46490b57 [MIPS: kernel: elf: Improve the overall ABI and FPU mode
checks] reduced `get_fp_abi' to an elaborate pass-through.  Drop it
then.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9677/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9676/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Correct a copy-and-paste issue with the description for `movf_func'
referring to `movt_func'.  Reformat the former function to match the
latter.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9675/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Correct the double-tab indentation of the branch-likely not-taken case.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9674/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Reword the comment for `__cpu_has_fpu' to make it unambiguous this code
is for external floating-point units only, generally MIPS I processors
using the original CP1 hardware interface.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9673/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Adjust the explanatory comment for FPU emulator traps according to
ba3049ed [MIPS: Switch FPU emulator trap to BREAK instruction.];
originally coming from `do_ade'.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9672/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add the remaining missing comments for IEEE 754 special value array
indices.  Reindent macro definitions for consistency.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9671/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

IEEE754_SPCVAL_NMIN denotes the index into the special value array where
the closest to zero negative normal number expressible is stored.
Similarly IEEE754_SPCVAL_NMIND denotes such index for the closest to
zero negative subnormal number expressible.  Make comments match that.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9670/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Reindent CP0 Cause macros for a single space after #define, leaving
extra indentation for individual Interrupt Pending bits as with CP0
Status register's Interrupt Mask bits.

[ralf@linux-mips.org: Fix conflict.]
[ralf@linux-mips.org: Fix indentation of the CAUSEB_FDCI and CAUSEF_FDCI
definitions.]

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9669/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

TX39 CP0 Configuration Register 3 macro definitions have been randomly
thrown in the middle of a block of CP0 Status register value macros.
Move them to the end of the whole CP0 register value macro block,
complementing the location of the TX39 Cache register name macro at the
end of the CP0 register name macro block.

[ralf@linux-mips.org: Fix conflict.]

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9668/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Originally CP1 macros were placed between CP0 register name macros and
CP0 register value macros.  As changes were applied to the header the
position of CP1 macros gradually has become more and more arbitrary and
two separate blocks were created.  This may only cause confusion.

Move them out of the way then and place together after all the CP0
macros.  No semantic change.

[ralf@linux-mips.org: Fix conflict.]

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9667/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Remove a duplicate FPU Status Register reference that has been there
since forever and a mistakenly copied and pasted R4xx0 manual reference.

[ralf@linux-mips.org: Fix conflict.]

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9666/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The MIPS port has supported this option since forever, long before SH
was even in plans.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9665/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

So let's remove everythig that only make sense for a kernel module and
build the thing unconditionally.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>