- Jul 07, 2022
-
-
Lukas Bulwahn authored
The email address sleep_walker@suse.com and the url http://hackndev.com/ , provided in the ARM/PALM TREO SUPPORT section, are not reachable anymore. Make this machine support orphan, and give somebody the chance to step up. Move the maintainer into CREDITS to keep the attribution to his work. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
- Jul 06, 2022
-
-
Arnd Bergmann authored
Merge tag 'v5.19-rockchip-socfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Add a missing of_node_put in suspend code error path. * tag 'v5.19-rockchip-socfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: rockchip: Add missing of_node_put() in rockchip_suspend_init() Link: https://lore.kernel.org/r/7527945.6fTUFtlzNn@phil Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes rk3399 vdu clock-rate fix, otg port fix on Quartz64-A and ethernet fix on Quartz64-B (actual production model) * tag 'v5.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Assign RK3399 VDU clock rate arm64: dts: rockchip: Fix Quartz64-A dwc3 otg port behavior arm64: dts: rockchip: Fix ethernet on production Quartz64-B Link: https://lore.kernel.org/r/7723415.29KlJPOoH8@phil Signed-off-by:
-
- Jul 04, 2022
-
-
Arnd Bergmann authored
Merge tag 'stm32-dt-for-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.19, round 2 Highlights: ----------- -Fixes STM32MP15: - Add missing usbh clock and fix clk order for usbh to avoid PLL issue. - Fix SCMI version: use scmi regulator and update missing SCMI clocks to be able to correcly boot. * tag 'stm32-dt-for-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15 ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board ARM: dts: stm32: use the correct clock source for CEC on stm32mp151 ARM: dts: stm32: fix pwr regulators references to use scmi Link: https://lore.kernel.org/r/1259e082-a3a4-96a5-ec9c-05dbb893a746@foss.st.com Signed-off-by:
-
Bill Wendling authored
When compiling with -Wformat, clang emits the following warnings: drivers/soc/qcom/smem.c:847:41: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] dev_err(smem->dev, "bad host %hu\n", remote_host); ~~~ ^~~~~~~~~~~ %u ./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err' dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__) ~~~ ^~~~~~~~~~~ ./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap' _p_func(dev, fmt, ##__VA_ARGS__); \ ~~~ ^~~~~~~~~~~ drivers/soc/qcom/smem.c:852:47: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] dev_err(smem->dev, "duplicate host %hu\n", remote_host); ~~~ ^~~~~~~~~~~ %u ./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err' dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__) ~~~ ^~~~~~~~~~~ ./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap' _p_func(dev, fmt, ##__VA_ARGS__); \ ~~~ ^~~~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct one and change type of remote_host to "u16" to match with other types. Signed-off-by:Bill Wendling <morbo@google.com> Tested-by:
Justin Stitt <jstitt007@gmail.com> Reviewed-by:
-
Fabrice Gasnier authored
The USBH composed of EHCI and OHCI controllers needs the PHY clock to be initialized first, before enabling (gating) them. The reverse is also required when going to suspend. So, add USBPHY clock as 1st entry in both controllers, so the USBPHY PLL gets enabled 1st upon controller init. Upon suspend/resume, this also makes the clock to be disabled/re-enabled in the correct order. This fixes some IRQ storm conditions seen when going to low-power, due to PHY PLL being disabled before all clocks are cleanly gated. Fixes: 949a0c0d ("ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c") Fixes: db7be2cb ("ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151") Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by:
Alexandre Torgue <alexandre.torgue@foss.st.com>
-
Gabriel Fernandez authored
Delete the node fixed clock managed by secure world with SCMI. Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@foss.st.com> Signed-off-by:
-
Gabriel Fernandez authored
LSE clock is provided by SCMI. Signed-off-by:
-
Gabriel Fernandez authored
The peripheral clock of CEC is not LSE but CEC. Signed-off-by:
-
Etienne Carriere authored
Fixes stm32mp15*-scmi DTS files introduced in [1] to also access PWR regulators through SCMI service. This is needed since enabling secure only access to RCC clock and reset controllers also enables secure access only on PWR voltage regulators reg11, reg18 and usb33 hence these must also be accessed through SCMI Voltage Domain protocol. This change applies on commit [2] that already corrects issues from commit [1]. Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Link: [1] https://lore.kernel.org/linux-arm-kernel/20220422150952.20587-7-alexandre.torgue@foss.st.com Link: [2] https://lore.kernel.org/linux-arm-kernel/20220613071920.5463-1-alexandre.torgue@foss.st.com Signed-off-by:
Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by:
-
- Jul 03, 2022
-
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DT fixes for v5.19 This removes duplicate includes in the sc7180-trogdor files, which accidentally ended up disabling nodes intended to be enabled. It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's interconnects property is updated to match the #interconnect-cells, avoiding sync_state issues and the GIC ITS is defined, to correct the references from the PCIe nodes. On SDM845 the display subsystem's AHB clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2 are correctly specified. Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC. * tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo MAINTAINERS: Add myself as a reviewer for Qualcomm ARM/64 support arm64: dts: qcom: sdm845: use dispcc AHB clock for mdss node arm64: dts: qcom: sm8450 add ITS device tree node arm64: dts: qcom: msm8994: Fix CPU6/7 reg values arm64: dts: qcom: sm8450: fix interconnects property of UFS node arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar Link: https://lore.kernel.org/r/20220703030208.408109-1-bjorn.andersson@linaro.org Signed-off-by:
-
- Jul 01, 2022
-
-
Arnd Bergmann authored
Merge tag 'amlogic-arm-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes Amlogic ARM mach-meson changes for v5.20: - Fix refcount leak in meson_smp_prepare_cpus * tag 'amlogic-arm-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: meson: Fix refcount leak in meson_smp_prepare_cpus Link: https://lore.kernel.org/r/cbf6bcb5-c7be-40fe-4436-4578c9d6c532@baylibre.com Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'scmi-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI firmware driver fixes for v5.19 Few more fixes to address: 1. Issue reported on Juno with HDLCD clock which turned out to be yet another firmware issue. The firmware is not conformant to the spec and we now have to workaround as this may be copied to other platforms as well. The spec expects to return size of 3 for a range clock rate description while the firmware returns 1. We have other ways to validate all the 3 entries the driver reads are polpulated and we use the same to workaround this firmware bug. 2. Optee transport not setting the correct reponse length which is similar to the one reported earlier on Rockchip platform. 3. Drop the usage of the deprecated ida_simple_{get,remove} and migrate to the ida_{alloc,free} * tag 'scmi-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API firmware: arm_scmi: Fix response size warning for OPTEE transport firmware: arm_scmi: Relax CLOCK_DESCRIBE_RATES out-of-spec checks Link: https://lore.kernel.org/r/20220628133315.699803-1-sudeep.holla@arm.com Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.19, round 2: - Fix the SDIO description for imx7d-smegw01 board to ensure there is no communication made at 1.8V. - Fix pgc_ispdwp power-domain clock, which should be IMX8MP_CLK_MEDIA_ISP_ROOT. - Re-enable framebuffer support in mxs_defconfig to fix a Kconfig regression. - A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP based boards to leave reserved bits untouched. * tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings arm64: dts: imx8mp-venice-gw74xx: correct pad settings arm64: dts: imx8mp-evk: correct I2C3 pad settings arm64: dts: imx8mp-evk: correct I2C1 pad settings arm64: dts: imx8mp-evk: correct I2C5 pad settings arm64: dts: imx8mp-evk: correct vbus pad settings arm64: dts: imx8mp-evk: correct eqos pad settings arm64: dts: imx8mp-evk: correct vbus pad settings arm64: dts: imx8mp-evk: correct gpio-led pad settings arm64: dts: imx8mp-evk: correct the uart2 pinctl value arm64: dts: imx8mp-evk: correct mmc pad settings ARM: mxs_defconfig: Enable the framebuffer arm64: dts: imx8mp: correct clock of pgc_ispdwp ARM: dts: imx7d-smegw01: Fix the SDIO description Link: https://lore.kernel.org/r/20220629021244.GL819983@dragon Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'at91-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 5.19 It contains 3 SoC fixes and 2 DT fixes: SoC: - fix the wakeup from RTC and RTT for ULP1 mode - fix section mismatch warning - fix SAM9X60 SiP detection DT: - fixes the EEPROMs compatibles for sama5d2_icp and sam9x60ek and EEPROM size for sam9x60ek * tag 'at91-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: pm: Mark at91_pm_secure_init as __init ARM: at91: fix soc detection for SAM9X60 SiPs ARM: dts: at91: sama5d2_icp: fix eeprom compatibles ARM: dts: at91: sam9x60ek: fix eeprom compatible and size ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt ARM: at91: pm: use proper compatible for sama5d2's rtc Link: https://lore.kernel.org/r/20220628135130.3114878-1-claudiu.beznea@microchip.com Signed-off-by:
-
Linus Walleij authored
The kernel test robot found this inconsistency: drivers/soc/ixp4xx/ixp4xx-npe.c:737:34: warning: 'ixp4xx_npe_of_match' defined but not used [-Wunused-const-variable=] 737 | static const struct of_device_id ixp4xx_npe_of_match[] = { This is because the match is enclosed in the of_match_ptr() which compiles into NULL when OF is disabled and this is unnecessary. Fix it by dropping of_match_ptr() around the match. Signed-off-by:Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220626074315.61209-1-linus.walleij@linaro.org ' Signed-off-by:
-
- Jun 28, 2022
-
-
Fabio Estevam authored
at91_pm_secure_init() is used inside sama5d2_pm_init(), which has the __init notation. Pass the __init notation to at91_pm_secure_init() as well to fix the following section mismatch warning: WARNING: modpost: vmlinux.o(.text.unlikely+0x2138): Section mismatch in reference from the function at91_pm_secure_init() to the (unknown reference) .init.rodata:(unknown) Fixes: f2f5cf78 ("ARM: at91: pm: add support for sama5d2 secure suspend") Signed-off-by:
Fabio Estevam <festevam@denx.de> Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220622114810.1186330-1-festevam@gmail.com
-
Mihai Sain authored
Fix SoC detection for SAM9X60 SiPs: SAM9X60D5M SAM9X60D1G SAM9X60D6K Fixes: af3a1051 ("drivers: soc: atmel: add per soc id and version match masks") Signed-off-by:
Mihai Sain <mihai.sain@microchip.com> Signed-off-by:
-
Eugen Hristev authored
The eeprom memories on the board are microchip 24aa025e48, which are 2 Kbits and are compatible with at24c02 not at24c32. Fixes: 68a95ef7 ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by:
-
Eugen Hristev authored
The board has a microchip 24aa025e48 eeprom, which is a 2 Kbits memory, so it's compatible with at24c02 not at24c32. Also the size property is wrong, it's not 128 bytes, but 256 bytes. Thus removing and leaving it to the default (256). Fixes: 1e5f532c ("ARM: dts: at91: sam9x60: add device tree for soc and board") Signed-off-by:
-
Claudiu Beznea authored
Use proper compatible strings for SAMA7G5's RTC and RTT IPs. These are necessary for configuring wakeup sources for ULP1 PM mode. Fixes: 6501330f ("ARM: at91: pm: add pm support for SAMA7G5") Signed-off-by:
-
Claudiu Beznea authored
Use proper compatible strings for SAM9X60's RTC and RTT IPs. These are necessary for configuring wakeup sources for ULP1 PM mode. Fixes: eaedc0d3 ("ARM: at91: pm: add ULP1 support for SAM9X60") Signed-off-by:
-
Claudiu Beznea authored
Use proper compatible strings for SAMA5D2's RTC IPs. This is necessary for configuring wakeup sources for ULP1 PM mode. Fixes: d7484f5c ("ARM: at91: pm: configure wakeup sources for ULP1 mode") Signed-off-by:
-
- Jun 27, 2022
-
-
Stephan Gerhold authored
"make dtbs_check" complains about the missing "-supply" suffix for vdd_lvs1_2 which is clearly a typo, originally introduced in the msm8994-smd-rpm.dtsi file and apparently later copied to msm8992-xiaomi-libra.dts: msm8992-lg-bullhead-rev-10/101.dtb: pm8994-regulators: 'vdd_lvs1_2' does not match any of the regexes: '.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+' From schema: regulator/qcom,smd-rpm-regulator.yaml msm8992-xiaomi-libra.dtb: pm8994-regulators: 'vdd_lvs1_2' does not match any of the regexes: '.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+' From schema: regulator/qcom,smd-rpm-regulator.yaml Reported-by:
Rob Herring <robh@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Fixes: f3b2c99e ("arm64: dts: Enable onboard SDHCI on msm8992") Fixes: 0f5cdb31 ("arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree") Signed-off-by:
Stephan Gerhold <stephan.gerhold@kernkonzept.com> Reviewed-by:
Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220627135938.2901871-1-stephan.gerhold@kernkonzept.com
-
Bo Liu authored
Replace the deprecated ida_simple_{get,remove} with ida_{alloc,free}. Link: https://lore.kernel.org/r/20220616055052.4559-1-liubo03@inspur.com Signed-off-by:Bo Liu <liubo03@inspur.com> [sudeep.holla: Replace ida_alloc_min with ida_alloc as suggested by Cristian] Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com>
-
Vincent Guittot authored
Some protocols check the response size with the expected value but optee shared memory doesn't return such size whereas it is available in the optee output buffer. As an example, the base protocol compares the response size with the expected result when requesting the list of protocol which triggers a warning with optee shared memory: arm-scmi firmware:scmi0: Malformed reply - real_sz:116 calc_sz:4 (loop_num_ret:4) Save the output buffer length and use it when fetching the answer. Link: https://lore.kernel.org/r/20220624074549.3298-1-vincent.guittot@linaro.org Reviewed-by:
Cristian Marussi <cristian.marussi@arm.com> Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
-
Peng Fan authored
BIT3 and BIT0 are reserved bits, should not touch. Fixes: aec8ad34 ("arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit") Signed-off-by:
Peng Fan <peng.fan@nxp.com> Reviewed-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
BIT3 and BIT0 are reserved bits, should not touch. Fixes: 88f7f6bc ("arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP") Signed-off-by:
-
Peng Fan authored
BIT3 and BIT0 are reserved bits, should not touch. Fixes: 6f968526 ("arm64: dts: freescale: Add support EQOS MAC on phyBOARD-Pollux-i.MX8MP") Signed-off-by:
-
Peng Fan authored
BIT3 and BIT0 are reserved bits, should not touch. Fixes: 846f7528 ("arm64: dts: imx8mp-phyboard-pollux-rdk: Change debug UART") Signed-off-by:
-
Peng Fan authored
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Should not set reserved bit. Fixes: 7899eb6c ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support") Signed-off-by:
-
Peng Fan authored
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: 5e4a67ff ("arm64: dts: imx8mp-evk: Add i2c3 support") Signed-off-by:
-
Peng Fan authored
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: 5497bc2a ("arm64: dts: imx8mp-evk: Add PMIC device") Signed-off-by:
-
Peng Fan authored
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: 8134822d ("arm64: dts: imx8mp-evk: add support for I2C5") Signed-off-by:
-
Peng Fan authored
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Not set reserved bit. Fixes: 9e847693 ("arm64: dts: freescale: Add i.MX8MP EVK board support") Signed-off-by:
-
Peng Fan authored
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: dc6d5dc8 ("arm64: dts: imx8mp-evk: enable EQOS ethernet") Signed-off-by:
-
Peng Fan authored
0x19 is not a valid setting. According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Not set reserved bit. Fixes: 43da4f92 ("arm64: dts: imx8mp-evk: enable usb1 as host mode") Signed-off-by:
-
Peng Fan authored
0x19 is not a valid setting. According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Correct setting with PE PUE set, DSE set to 0. Fixes: 50d336b1 ("arm64: dts: imx8mp-evk: Add GPIO LED support") Signed-off-by:
-
Sherry Sun authored
According to the IOMUXC_SW_PAD_CTL_PAD_UART2_RXD/TXD register define in imx8mp RM, bit0 and bit3 are reserved, and the uart2 rx/tx pin should enable the pull up, so need to set bit8 to 1. The original pinctl value 0x49 is incorrect and needs to be changed to 0x140, same as uart1 and uart3. Fixes: 9e847693 ("arm64: dts: freescale: Add i.MX8MP EVK board support") Reviewed-by:
Haibo Chen <haibo.chen@nxp.com> Signed-off-by:
Sherry Sun <sherry.sun@nxp.com> Signed-off-by:
-
Peng Fan authored
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Not set reserved bit. Fixes: 9e847693 ("arm64: dts: freescale: Add i.MX8MP EVK board support") Signed-off-by:
-
