The sequence count bridge_mcast_querier::seq is protected by
net_bridge::multicast_lock but seqcount_init() does not associate the
seqcount with the lock. This leads to a warning on PREEMPT_RT because
preemption is still enabled.

Let seqcount_init() associate the seqcount with lock that protects the
write section. Remove lockdep_assert_held_once() because lockdep already checks
whether the associated lock is held.

Fixes: 67b746f9 ("net: bridge: mcast: make sure querier port/address updates are consistent")
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20210928141049.593833-1-bigeasy@linutronix.de


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The second resource is optional which is only provided on the chipset
IPQ5018. But the blamed commit ignores that and if the resource is
not there it just fails.

the resource is used like this,
	if (priv->eth_ldo_rdy) {
		val = readl(priv->eth_ldo_rdy);
		val |= BIT(0);
		writel(val, priv->eth_ldo_rdy);
		fsleep(IPQ_PHY_SET_DELAY_US);
	}

This patch reverts that to still allow the second resource to be optional
because other SoC have the some MDIO controller and doesn't need to
second resource.

Fixes: fa14d03e ("net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()")
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210928134849.2092-1-caihuoqing@baidu.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2021-09-28

The following pull-request contains BPF updates for your *net* tree.

We've added 10 non-merge commits during the last 14 day(s) which contain
a total of 11 files changed, 139 insertions(+), 53 deletions(-).

The main changes are:

1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk.

2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh.

3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann.

4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi.

5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer.

6) Fix return value handling for struct_ops BPF programs, from Hou Tao.

7) Various fixes to BPF selftests, from Jiri Benc.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
,

This function copies strings around between multiple buffers
including a large on-stack array that causes a build warning
on 32-bit systems:

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pg':
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:782:1: error: the frame size of 1424 bytes is larger than 1400 bytes [-Werror=frame-larger-than=]

The function can probably be cleaned up a lot, to go back to
printing directly into the output buffer, but dynamically allocating
the structure is a simpler workaround for now.

Fixes: 04d96139 ("net: hns3: refine function hclge_dbg_dump_tm_pri()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the documentation the second resource is optional. But the
blamed commit ignores that and if the resource is not there it just
fails.

This patch reverts that to still allow the second resource to be
optional because other SoC have the some MDIO controller and doesn't
need to second resource.

Fixes: 672a1c39 ("net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

unix_create1() returns NULL on error, and the callers assume that it never
fails for reasons other than out of memory.  So, the callers always return
-ENOMEM when unix_create1() fails.

However, it also returns NULL when the number of af_unix sockets exceeds
twice the limit controlled by sysctl: fs.file-max.  In this case, the
callers should return -ENFILE like alloc_empty_file().

This patch changes unix_create1() to return the correct error value instead
of NULL on error.

Out of curiosity, the assumption has been wrong since 1999 due to this
change introduced in 2.2.4 [0].

  diff -u --recursive --new-file v2.2.3/linux/net/unix/af_unix.c linux/net/unix/af_unix.c
  --- v2.2.3/linux/net/unix/af_unix.c	Tue Jan 19 11:32:53 1999
  +++ linux/net/unix/af_unix.c	Sun Mar 21 07:22:00 1999
  @@ -388,6 +413,9 @@
   {
   	struct sock *sk;

  +	if (atomic_read(&unix_nr_socks) >= 2*max_files)
  +		return NULL;
  +
   	MOD_INC_USE_COUNT;
   	sk = sk_alloc(PF_UNIX, GFP_KERNEL, 1);
   	if (!sk) {

[0]: https://cdn.kernel.org/pub/linux/kernel/v2.2/patch-2.2.4.gz



Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

up->corkflag field can be read or written without any lock.
Annotate accesses to avoid possible syzbot/KCSAN reports.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When CONFIG_INET is not set, there are failing references to IPv4
functions, so make this driver depend on INET.

Fixes these build errors:

sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common':
sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send'
sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common':
sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Aaron Young <aaron.young@oracle.com>
Cc: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't print stats for which we haven't reserved space as it can
cause nasty memory bashing and related bad behaviors.

Fixes: aa620993 ("ionic: pull per-q stats work out of queue loops")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

nguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-09-27

This series contains updates to e100 driver only.

Jake corrects under allocation of register buffer due to incorrect
calculations and fixes buffer overrun of register dump.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Many architectures don't define virt_to_bus() any more, as drivers
should be using the dma-mapping interfaces where possible:

In file included from drivers/net/hamradio/dmascc.c:27:
drivers/net/hamradio/dmascc.c: In function 'tx_on':
drivers/net/hamradio/dmascc.c:976:30: error: implicit declaration of function 'virt_to_bus'; did you mean 'virt_to_fix'? [-Werror=implicit-function-declaration]
  976 |                              virt_to_bus(priv->tx_buf[priv->tx_tail]) + n);
      |                              ^~~~~~~~~~~
arch/arm/include/asm/dma.h:109:52: note: in definition of macro 'set_dma_addr'
  109 |         __set_dma_addr(chan, (void *)__bus_to_virt(addr))
      |                                                    ^~~~

Add the Kconfig dependency to prevent this from being built on
architectures without virt_to_bus().

Fixes: bc1abb9e ("dmascc: use proper 'virt_to_bus()' rather than casting to 'int'")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

An object file cannot be built for both loadable module and built-in
use at the same time:

arm-linux-gnueabi-ld: drivers/net/ethernet/micrel/ks8851_common.o: in function `ks8851_probe_common':
ks8851_common.c:(.text+0xf80): undefined reference to `__this_module'

Change the ks8851_common code to be a standalone module instead,
and use Makefile logic to ensure this is built-in if at least one
of its two users is.

Fixes: 797047f8 ("net: ks8851: Implement Parallel bus operations")
Link: https://lore.kernel.org/netdev/20210125121937.3900988-1-arnd@kernel.org/


Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the case where the dst register maps to %rax as otherwise this produces
an incorrect mapping with the implementation in 981f94c3 ("bpf: Add
bitwise atomic instructions") as %rax is clobbered given it's part of the
cmpxchg as operand.

The issue is similar to b29dd96b ("bpf, x86: Fix BPF_FETCH atomic and/or/
xor with r0 as src") just that the case of dst register was missed.

Before, dst=r0 (%rax) src=r2 (%rsi):

  [...]
  c5:   mov    %rax,%r10
  c8:   mov    0x0(%rax),%rax       <---+ (broken)
  cc:   mov    %rax,%r11                |
  cf:   and    %rsi,%r11                |
  d2:   lock cmpxchg %r11,0x0(%rax) <---+
  d8:   jne    0x00000000000000c8       |
  da:   mov    %rax,%rsi                |
  dd:   mov    %r10,%rax                |
  [...]                                 |
                                        |
After, dst=r0 (%rax) src=r2 (%rsi):     |
                                        |
  [...]                                 |
  da:	mov    %rax,%r10                |
  dd:	mov    0x0(%r10),%rax       <---+ (fixed)
  e1:	mov    %rax,%r11                |
  e4:	and    %rsi,%r11                |
  e7:	lock cmpxchg %r11,0x0(%r10) <---+
  ed:	jne    0x00000000000000dd
  ef:	mov    %rax,%rsi
  f2:	mov    %r10,%rax
  [...]

The remaining combinations were fine as-is though:

After, dst=r9 (%r15) src=r0 (%rax):

  [...]
  dc:	mov    %rax,%r10
  df:	mov    0x0(%r15),%rax
  e3:	mov    %rax,%r11
  e6:	and    %r10,%r11
  e9:	lock cmpxchg %r11,0x0(%r15)
  ef:	jne    0x00000000000000df      _
  f1:	mov    %rax,%r10                | (unneeded, but
  f4:	mov    %r10,%rax               _|  not a problem)
  [...]

After, dst=r9 (%r15) src=r4 (%rcx):

  [...]
  de:	mov    %rax,%r10
  e1:	mov    0x0(%r15),%rax
  e5:	mov    %rax,%r11
  e8:	and    %rcx,%r11
  eb:	lock cmpxchg %r11,0x0(%r15)
  f1:	jne    0x00000000000000e1
  f3:	mov    %rax,%rcx
  f6:	mov    %r10,%rax
  [...]

The case of dst == src register is rejected by the verifier and
therefore not supported, but x86 JIT also handles this case just
fine.

After, dst=r0 (%rax) src=r0 (%rax):

  [...]
  eb:	mov    %rax,%r10
  ee:	mov    0x0(%r10),%rax
  f2:	mov    %rax,%r11
  f5:	and    %r10,%r11
  f8:	lock cmpxchg %r11,0x0(%r10)
  fe:	jne    0x00000000000000ee
 100:	mov    %rax,%r10
 103:	mov    %r10,%rax
  [...]

Fixes: 981f94c3 ("bpf: Add bitwise atomic instructions")
Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

It's not enough to set net.ipv4.conf.all.rp_filter=0, that does not override
a greater rp_filter value on the individual interfaces. We also need to set
net.ipv4.conf.default.rp_filter=0 before creating the interfaces. That way,
they'll also get their own rp_filter value of zero.

Fixes: 0fde56e4 ("selftests: bpf: add test_lwt_ip_encap selftest")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/b1cdd9d469f09ea6e01e9c89a6071c79b7380f89.1632386362.git.jbenc@redhat.com

When building bpf selftest with make -j, I'm randomly getting build failures
such as this one:

  In file included from progs/bpf_flow.c:19:
  [...]/tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
  #include "bpf_helper_defs.h"
           ^~~~~~~~~~~~~~~~~~~

The file that fails the build varies between runs but it's always in the
progs/ subdir.

The reason is a missing make dependency on libbpf for the .o files in
progs/. There was a dependency before commit 3ac2e20f but that commit
removed it to prevent unneeded rebuilds. However, that only works if libbpf
has been built already; the 'wildcard' prerequisite does not trigger when
there's no bpf_helper_defs.h generated yet.

Keep the libbpf as an order-only prerequisite to satisfy both goals. It is
always built before the progs/ objects but it does not trigger unnecessary
rebuilds by itself.

Fixes: 3ac2e20f ("selftests/bpf: BPF object files should depend only on libbpf headers")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/ee84ab66436fba05a197f952af23c98d90eb6243.1632758415.git.jbenc@redhat.com

BPF test infra has some hacks in place which kzalloc() a socket and perform
minimum init via sock_net_set() and sock_init_data(). As a result, the sk's
skcd->cgroup is NULL since it didn't go through proper initialization as it
would have been the case from sk_alloc(). Rather than re-adding a NULL test
in sock_cgroup_ptr() just for this, use sk_{alloc,free}() pair for the test
socket. The latter also allows to get rid of the bpf_sk_storage_free() special
case.

Fixes: 8520e224 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode")
Fixes: b7a1848e ("bpf: add BPF_PROG_TEST_RUN support for flow dissector")
Fixes: 2cb494a3 ("bpf: add tests for direct packet access from CGROUP_SKB")
Reported-by:  <syzbot+664b58e9a40fbb2cec71@syzkaller.appspotmail.com>
Reported-by:  <syzbot+33f36d0754d4c5c0e102@syzkaller.appspotmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by:  <syzbot+664b58e9a40fbb2cec71@syzkaller.appspotmail.com>
Tested-by:  <syzbot+33f36d0754d4c5c0e102@syzkaller.appspotmail.com>
Link: https://lore.kernel.org/bpf/20210927123921.21535-2-daniel@iogearbox.net

If cgroup_sk_alloc() is called from interrupt context, then just assign the
root cgroup to skcd->cgroup. Prior to commit 8520e224 ("bpf, cgroups:
Fix cgroup v2 fallback on v1/v2 mixed mode") we would just return, and later
on in sock_cgroup_ptr(), we were NULL-testing the cgroup in fast-path, and
iff indeed NULL returning the root cgroup (v ?: &cgrp_dfl_root.cgrp). Rather
than re-adding the NULL-test to the fast-path we can just assign it once from
cgroup_sk_alloc() given v1/v2 handling has been simplified. The migration from
NULL test with returning &cgrp_dfl_root.cgrp to assigning &cgrp_dfl_root.cgrp
directly does /not/ change behavior for callers of sock_cgroup_ptr().

syzkaller was able to trigger a splat in the legacy netrom code base, where
the RX handler in nr_rx_frame() calls nr_make_new() which calls sk_alloc()
and therefore cgroup_sk_alloc() with in_interrupt() condition. Thus the NULL
skcd->cgroup, where it trips over on cgroup_sk_free() side given it expects
a non-NULL object. There are a few other candidates aside from netrom which
have similar pattern where in their accept-like implementation, they just call
to sk_alloc() and thus cgroup_sk_alloc() instead of sk_clone_lock() with the
corresponding cgroup_sk_clone() which then inherits the cgroup from the parent
socket. None of them are related to core protocols where BPF cgroup programs
are running from. However, in future, they should follow to implement a similar
inheritance mechanism.

Additionally, with a !CONFIG_CGROUP_NET_PRIO and !CONFIG_CGROUP_NET_CLASSID
configuration, the same issue was exposed also prior to 8520e224 due to
commit e876ecc6 ("cgroup: memcg: net: do not associate sock with unrelated
cgroup") which added the early in_interrupt() return back then.

Fixes: 8520e224 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode")
Fixes: e876ecc6 ("cgroup: memcg: net: do not associate sock with unrelated cgroup")
Reported-by:  <syzbot+df709157a4ecaf192b03@syzkaller.appspotmail.com>
Reported-by:  <syzbot+533f389d4026d86a2a95@syzkaller.appspotmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by:  <syzbot+df709157a4ecaf192b03@syzkaller.appspotmail.com>
Tested-by:  <syzbot+533f389d4026d86a2a95@syzkaller.appspotmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/bpf/20210927123921.21535-1-daniel@iogearbox.net

When a BPF object is compiled without BTF info (without -g),
trying to link such objects using bpftool causes a SIGSEGV due to
btf__get_nr_types accessing obj->btf which is NULL. Fix this by
checking for the NULL pointer, and return error.

Reproducer:
$ cat a.bpf.c
extern int foo(void);
int bar(void) { return foo(); }
$ cat b.bpf.c
int foo(void) { return 0; }
$ clang -O2 -target bpf -c a.bpf.c
$ clang -O2 -target bpf -c b.bpf.c
$ bpftool gen obj out a.bpf.o b.bpf.o
Segmentation fault (core dumped)

After fix:
$ bpftool gen obj out a.bpf.o b.bpf.o
libbpf: failed to find BTF info for object 'a.bpf.o'
Error: failed to link 'a.bpf.o': Unknown error -22 (-22)

Fixes: a4634922 (libbpf: Add linker extern resolution support for functions and global variables)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210924023725.70228-1-memxor@gmail.com

BPF folks maintain these and they're not picked up by the current
MAINTAINERS entries.

Files caught by the added globs:

  include/linux/btf.h
  include/linux/btf_ids.h
  include/uapi/linux/btf.h

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210924193557.3081469-1-davemarchevsky@fb.com

When introducing CAP_BPF, bpf_jit_charge_modmem() was not changed to treat
programs with CAP_BPF as privileged for the purpose of JIT memory allocation.
This means that a program without CAP_BPF can block a program with CAP_BPF
from loading a program.

Fix this by checking bpf_capable() in bpf_jit_charge_modmem().

Fixes: 2c78ee89 ("bpf: Implement CAP_BPF")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922111153.19843-1-lmb@cloudflare.com

The e100_get_regs function is used to implement a simple register dump
for the e100 device. The data is broken into a couple of MAC control
registers, and then a series of PHY registers, followed by a memory dump
buffer.

The total length of the register dump is defined as (1 + E100_PHY_REGS)
* sizeof(u32) + sizeof(nic->mem->dump_buf).

The logic for filling in the PHY registers uses a convoluted inverted
count for loop which counts from E100_PHY_REGS (0x1C) down to 0, and
assigns the slots 1 + E100_PHY_REGS - i. The first loop iteration will
fill in [1] and the final loop iteration will fill in [1 + 0x1C]. This
is actually one more than the supposed number of PHY registers.

The memory dump buffer is then filled into the space at
[2 + E100_PHY_REGS] which will cause that memcpy to assign 4 bytes past
the total size.

The end result is that we overrun the total buffer size allocated by the
kernel, which could lead to a panic or other issues due to memory
corruption.

It is difficult to determine the actual total number of registers
here. The only 8255x datasheet I could find indicates there are 28 total
MDI registers. However, we're reading 29 here, and reading them in
reverse!

In addition, the ethtool e100 register dump interface appears to read
the first PHY register to determine if the device is in MDI or MDIx
mode. This doesn't appear to be documented anywhere within the 8255x
datasheet. I can only assume it must be in register 28 (the extra
register we're reading here).

Lets not change any of the intended meaning of what we copy here. Just
extend the space by 4 bytes to account for the extra register and
continue copying the data out in the same order.

Change the E100_PHY_REGS value to be the correct total (29) so that the
total register dump size is calculated properly. Fix the offset for
where we copy the dump buffer so that it doesn't overrun the total size.

Re-write the for loop to use counting up instead of the convoluted
down-counting. Correct the mdio_read offset to use the 0-based register
offsets, but maintain the bizarre reverse ordering so that we have the
ABI expected by applications like ethtool. This requires and additional
subtraction of 1. It seems a bit odd but it makes the flow of assignment
into the register buffer easier to follow.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

commit abf9b902 ("e100: cleanup unneeded math") tried to simplify
e100_get_regs_len and remove a double 'divide and then multiply'
calculation that the e100_reg_regs_len function did.

This change broke the size calculation entirely as it failed to account
for the fact that the numbered registers are actually 4 bytes wide and
not 1 byte. This resulted in a significant under allocation of the
register buffer used by e100_get_regs.

Fix this by properly multiplying the register count by u32 first before
adding the size of the dump buffer.

Fixes: abf9b902 ("e100: cleanup unneeded math")
Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

GPY115 need reset PHY when it comes out from loopback mode if the firmware
version number (lower 8 bits) is equal to or below 0x76.

Fixes: 7d901a1e ("net: phy: add Maxlinear GPY115/21x/24x driver")
Signed-off-by: Xu Liang <lxu@maxlinear.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-net-2021-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211



Johannes berg says:

====================
Some fixes:
 * potential use-after-free in CCMP/GCMP RX processing
 * potential use-after-free in TX A-MSDU processing
 * revert to low data rates for no-ack as the commit
   broke other things
 * limit VHT MCS/NSS in radiotap injection
 * drop frames with invalid addresses in IBSS mode
 * check rhashtable_init() return value in mesh
 * fix potentially unaligned access in mesh
 * fix late beacon hrtimer handling in hwsim (syzbot)
 * fix documentation for PTK0 rekeying
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
mv88e6xxx: MTU fixes

These three patches fix MTU issues reported by 曹煜.

There are two different ways of configuring the MTU in the hardware.
The 6161 family is using the wrong method. Some of the marvell switch
enforce the MTU when the port is used for CPU/DSA, some don't.
Because of the extra header, the MTU needs increasing with this
overhead.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Same members of the Marvell Ethernet switches impose MTU restrictions
on ports used for connecting to the CPU or another switch for DSA. If
the MTU is set too low, tagged frames will be discarded. Ensure the
worst case tagger overhead is included in setting the MTU for DSA and
CPU ports.

Fixes: 1baf0fac ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU")
Reported by: 曹煜 <cao88yu@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MTU passed to the DSA driver is the payload size, typically 1500.
However, the switch uses the frame size when applying restrictions.
Adjust the MTU with the size of the Ethernet header and the frame
checksum. The VLAN header also needs to be included when the frame
size it per port, but not when it is global.

Fixes: 1baf0fac ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU")
Reported by: 曹煜 <cao88yu@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The datasheets suggests the 6161 uses a per port setting for jumbo
frames. Testing has however shown this is not correct, it uses the old
style chip wide MTU control. Change the ops in the 6161 structure to
reflect this.

Fixes: 1baf0fac ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU")
Reported by: 曹煜 <cao88yu@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Once device_register() failed, we should call put_device() to
decrement reference count for cleanup. Or it will cause memory
leak.

BUG: memory leak
unreferenced object 0xffff888114032e00 (size 256):
  comm "kworker/1:3", pid 2960, jiffies 4294943572 (age 15.920s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 08 2e 03 14 81 88 ff ff  ................
    08 2e 03 14 81 88 ff ff 90 76 65 82 ff ff ff ff  .........ve.....
  backtrace:
    [<ffffffff8265cfab>] kmalloc include/linux/slab.h:591 [inline]
    [<ffffffff8265cfab>] kzalloc include/linux/slab.h:721 [inline]
    [<ffffffff8265cfab>] device_private_init drivers/base/core.c:3203 [inline]
    [<ffffffff8265cfab>] device_add+0x89b/0xdf0 drivers/base/core.c:3253
    [<ffffffff828dd643>] __mdiobus_register+0xc3/0x450 drivers/net/phy/mdio_bus.c:537
    [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87
    [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline]
    [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786
    [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745
    [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline]
    [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596
    [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline]
    [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751
    [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781
    [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898
    [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969
    [<ffffffff82660916>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
    [<ffffffff8265cd0b>] device_add+0x5fb/0xdf0 drivers/base/core.c:3359
    [<ffffffff82c343b9>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2170
    [<ffffffff82c4473c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238

BUG: memory leak
unreferenced object 0xffff888116f06900 (size 32):
  comm "kworker/0:2", pid 2670, jiffies 4294944448 (age 7.160s)
  hex dump (first 32 bytes):
    75 73 62 2d 30 30 31 3a 30 30 33 00 00 00 00 00  usb-001:003.....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81484516>] kstrdup+0x36/0x70 mm/util.c:60
    [<ffffffff814845a3>] kstrdup_const+0x53/0x80 mm/util.c:83
    [<ffffffff82296ba2>] kvasprintf_const+0xc2/0x110 lib/kasprintf.c:48
    [<ffffffff82358d4b>] kobject_set_name_vargs+0x3b/0xe0 lib/kobject.c:289
    [<ffffffff826575f3>] dev_set_name+0x63/0x90 drivers/base/core.c:3147
    [<ffffffff828dd63b>] __mdiobus_register+0xbb/0x450 drivers/net/phy/mdio_bus.c:535
    [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87
    [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline]
    [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786
    [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745
    [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline]
    [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596
    [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline]
    [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751
    [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781
    [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898
    [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969

Reported-by:  <syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com>
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit d437f5aa.

Code has been duplicated through commit <273c29e9> "ibmvnic: check
failover_pending in login response"

Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is a replication of Christian Lamparter's "net: bgmac-bcma:
handle deferred probe error due to mac-address" patch for the
bgmac-platform driver [1].

As is the case with the bgmac-bcma driver, this change is to cover the
scenario where the MAC address cannot yet be discovered due to reliance
on an nvmem provider which is yet to be instantiated, resulting in a
random address being assigned that has to be manually overridden.

[1] https://lore.kernel.org/netdev/20210919115725.29064-1-chunkeey@gmail.com



Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a spelling mistake in a dev_err error message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

@IEEE80211_KEY_FLAG_GENERATE_IV setting is irrelevant for RX.
Move the requirement to the correct section in the PTK0 rekey
documentation.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20210924200514.7936-1-alexander@wetzel-home.de


Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When rhashtable_init() fails, it returns -EINVAL.
However, since error return value of rhashtable_init is not checked,
it can cause use of uninitialized pointers.
So, fix unhandled errors of rhashtable_init.

Signed-off-by: MichelleJin <shjy180909@gmail.com>
Link: https://lore.kernel.org/r/20210927033457.1020967-4-shjy180909@gmail.com


Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When PN checking is done in mac80211, for fragmentation we need
to copy the PN to the RX struct so we can later use it to do a
comparison, since commit bf30ca92 ("mac80211: check defrag
PN against current frame").

Unfortunately, in that commit I used the 'hdr' variable without
it being necessarily valid, so use-after-free could occur if it
was necessary to reallocate (parts of) the frame.

Fix this by reloading the variable after the code that results
in the reallocations, if any.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=214401.

Cc: stable@vger.kernel.org
Fixes: bf30ca92 ("mac80211: check defrag PN against current frame")
Link: https://lore.kernel.org/r/20210927115838.12b9ac6bb233.I1d066acd5408a662c3b6e828122cd314fcb28cdb@changeid


Signed-off-by: Johannes Berg <johannes.berg@intel.com>

We observed below report when playing with netlink sock:

  UBSAN: shift-out-of-bounds in net/sched/sch_api.c:580:10
  shift exponent 249 is too large for 32-bit type
  CPU: 0 PID: 685 Comm: a.out Not tainted
  Call Trace:
   dump_stack_lvl+0x8d/0xcf
   ubsan_epilogue+0xa/0x4e
   __ubsan_handle_shift_out_of_bounds+0x161/0x182
   __qdisc_calculate_pkt_len+0xf0/0x190
   __dev_queue_xmit+0x2ed/0x15b0

it seems like kernel won't check the stab log value passing from
user, and will use the insane value later to calculate pkt_len.

This patch just add a check on the size/cell_log to avoid insane
calculation.

Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

1) ipset limits the max allocatable memory via kvmalloc() to MAX_INT,
   from Jozsef Kadlecsik.

2) Check ip_vs_conn_tab_bits value to be in the range specified
   in Kconfig, from Andrea Claudi.

3) Initialize fragment offset in ip6tables, from Jeremy Sowden.

4) Make conntrack hash chain length random, from Florian Westphal.

5) Add zone ID to conntrack and NAT hashtuple again, also from Florian.

6) Add selftests for bidirectional zone support and colliding tuples,
   from Florian Westphal.

7) Unlink table before synchronize_rcu when cleaning tables with
   owner, from Florian.

8) ipset limits the max allocatable memory via kvmalloc() to MAX_INT.

9) Release conntrack entries via workqueue in masquerade, from Florian.

10) Fix bogus net_init in iptables raw table definition, also from Florian.

11) Work around missing softdep in log extensions, from Florian Westphal.

12) Serialize hash resizes and cleanups with mutex, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: conntrack: serialize hash resizes and cleanups
  netfilter: log: work around missing softdep backend module
  netfilter: iptable_raw: drop bogus net_init annotation
  netfilter: nf_nat_masquerade: defer conntrack walk to work queue
  netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic
  netfilter: nf_tables: Fix oversized kvmalloc() calls
  netfilter: nf_tables: unlink table before deleting it
  selftests: netfilter: add zone stress test with colliding tuples
  selftests: netfilter: add selftest for directional zone support
  netfilter: nat: include zone id in nat table hash again
  netfilter: conntrack: include zone id in tuple hash again
  netfilter: conntrack: make max chain length random
  netfilter: ip6_tables: zero-initialize fragment offset
  ipvs: check that ip_vs_conn_tab_bits is between 8 and 20
  netfilter: ipset: Fix oversized kvmalloc() calls
====================

Link: https://lore.kernel.org/r/20210924221113.348767-1-pablo@netfilter.org


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix double free_netdev when mhi_prepare_for_transfer fails.

Fixes: 3ffec6a1 ("net: Add mhi-net driver")
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 05b35e7e ("smsc95xx: add phylib support"), link changes
are no longer propagated to usbnet. As a result, rx URB allocation won't
happen until there is a packet sent out first (this might never happen,
e.g. running just ssh server with a static IP). Fix by triggering usbnet
EVENT_LINK_CHANGE.

Fixes: 05b35e7e ("smsc95xx: add phylib support")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

Multipath RTA_FLOW is embedded in nexthop. Dump it in fib_add_nexthop()
to get the length of rtnexthop correct.

Fixes: b0f60193 ("ipv4: Refactor nexthop attributes in fib_dump_info")
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>