When I was refactoring Makefiles, I stupidly mistook 'real-obj-y' for
'real-objs-y' over and over again.  Finally, I decide to rename it to
'real-obj-y'.  This is consistent with 'obj-y', 'subdir-obj-y'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Just a cosmetic change to put related code close together.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>

modname can be calculated much more simply.  If modname-multi is
empty, it is a single-used object.  So, modname = $(basetarget).
Otherwise, modname = $(modname-multi).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>

Commit cf4f2193 ("kbuild: Allow to specify composite modules
with modname-m") added modname-m support, but missed to update the
corresponding multi-objs-m & modname-multi definition.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, KBUILD_MODNAME is defined only when $(modname) contains
just one word.  If an object is shared among multiple modules,
undefined KBUILD_MODNAME could cause a build error.  For example,
if CONFIG_DYNAMIC_DEBUG is enabled, any call of printk() populates
.modname, then fails to build due to undefined KBUILD_MODNAME.

Take the following code as an example:

  obj-m += foo.o
  obj-m += bar.o
  foo-objs := foo-bar-common.o foo-only.o
  bar-objs := foo-bar-common.o bar-only.o

In this case, there is room for argument what to define for
KBUILD_MODNAME when foo-bar-common.o is being compiled.
"foo", "bar", or what else?

One idea is to define colon-separated modules that share the object,
in this case, "bar:foo" (modules are sorted alphabetically by
$(sort ...)).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>

In the context ...

    $(obj)/%.s: $(src)/%.c FORCE
            $(call if_changed_dep,cc_s_c)

    $(obj)/%.i: $(src)/%.c FORCE
            $(call if_changed_dep,cpp_i_c)

    $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
            $(call cmd,force_checksrc)
            $(call if_changed_rule,cc_o_c)

    $(obj)/%.lst: $(src)/%.c FORCE
            $(call if_changed_dep,cc_lst_c)

'$*' returns the stem of the target (the part of '%'), so $(obj)/ has
already been ripped off.

$(subst $(obj)/,,$*.o) is the same as $*.o

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>

stat(1) is not standardized and different implementations have their own
(conflicting) flags for querying the size of a file.

ls(1) provides the same information (value of st.st_size) in the 5th
column, except when the file is a character or block device. This output
is standardized[0]. The -n option turns on -l, which writes lines
formatted like

  "%s %u %s %s %u %s %s\n", <file mode>, <number of links>,
      <owner name>, <group name>, <size>, <date and time>,
      <pathname>

but instead of writing the <owner name> and <group name>, it writes the
numeric owner and group IDs (this avoids /etc/passwd and /etc/group
lookups as well as potential field splitting issues).

The <size> field is specified as "the value that would be returned for
the file in the st_size field of struct stat".

To avoid duplicating logic in several locations in the tree, create
scripts/file-size.sh and update callers to use that instead of stat(1).

[0] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/ls.html#tag_20_73_10



Signed-off-by: Michael Forney <forney@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Incremental linking is gone, so rename built-in.o to built-in.a, which
is the usual extension for archive files.

This patch does two things, first is a simple search/replace:

git grep -l 'built-in\.o' | xargs sed -i 's/built-in\.o/built-in\.a/g'

The second is to invert nesting of nested text manipulations to avoid
filtering built-in.a out from libs-y2:

-libs-y2 := $(filter-out %.a, $(patsubst %/, %/built-in.a, $(libs-y)))
+libs-y2 := $(patsubst %/, %/built-in.a, $(filter-out %.a, $(libs-y)))

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree
FDT (that is, the .dtb file) as binary data in the kernel image. This
assembly source contains labels before and after the binary data. The
label names incorporate the file name of the corresponding .dtb file.
Hyphens are not legal characters in labels, so .dtb files built into the
kernel with hyphens in the file name result in errors like the
following:

bcm3368-netgear-cvg834g.dtb.S: Assembler messages:
bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'
bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'
bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'
bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-'

Fix this by updating cmd_dt_S_dtb to transform all hyphens from the file
name to underscores when constructing the labels.

As of v4.16-rc2, 1139 .dts files across ARM64, ARM, MIPS and PowerPC
contain hyphens in their names, but the issue only currently manifests
on Broadcom MIPS platforms, as that is the only place where such files
are built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y,
or on BMIPS kernels when the dtbs target is used (in the latter case it
admittedly shouldn't really build all the dtb.o files, but thats a
separate issue).

Fixes: 69583551 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: <stable@vger.kernel.org> # 4.9+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

With KASAN enabled the kernel has two different memset() functions, one
with KASAN checks (memset) and one without (__memset).  KASAN uses some
macro tricks to use the proper version where required.  For example
memset() calls in mm/slub.c are without KASAN checks, since they operate
on poisoned slab object metadata.

The issue is that clang emits memset() calls even when there is no
memset() in the source code.  They get linked with improper memset()
implementation and the kernel fails to boot due to a huge amount of KASAN
reports during early boot stages.

The solution is to add -fno-builtin flag for files with KASAN_SANITIZE :=
n marker.

Link: http://lkml.kernel.org/r/8ffecfffe04088c52c42b92739c2bd8a0bcb3f5e.1516384594.git.andreyknvl@google.com


Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Kbuild supports 3 levels of extra warnings, and multiple levels can
be combined, like W=12, W=123.  It was added by commit a6de553d
("kbuild: Allow to combine multiple W= levels").

From the log of commit 8654cb8d ("dtc: update warning settings
for new bus and node/property name checks"), I assume:

 - unit_address_vs_reg, simple_bus_reg, etc. belong to level 1
 - node_name_chars_strict, property_name_chars_strict belong to level 2

However, the level 1 warnings are displayed by any argument to W=.
On the other hand, the level 2 warnings are displayed by W=2, but
not by W=12, or W=123.

Use $(findstring ...) like scripts/Makefile.extrawarn.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Kconfig was the only user of these.  With Kconfig converted to use
the default 'yy' prefix, we do not need them any more.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>

In Linux build system convention, pre-generated files are version-
controlled with a "_shipped" suffix.  During the kernel building,
they are simply shipped (copied) removing the suffix.

This approach can reduce external tool dependency for the kernel build,
but it is tedious to manually regenerate such artifacts from developers'
point of view.  (We need to do "make REGENERATE_PARSERS=1" every time
we touch real source files such as *.l, *.y)

Some months ago, I sent out RFC patches to run flex, bison, and gperf
during the build.

In the review and test, Linus noticed gperf-3.1 had changed the lookup
function prototype.  Then, the use of gperf in kernel was entirely
removed by commit bb3290d9 ("Remove gperf usage from toolchain").

This time, I tested several versions of flex and bison, and I was not
hit by any compatibility issue except a flaw in flex-2.6.3; if you
generate lexer for dtc and genksyms with flex-2.6.3, you will see
"yywrap redefined" warning.  This was not intentional, but a bug,
fixed by flex-2.6.4.  Otherwise, both flex and bison look fairly
stable for a long time.

This commit prepares some build rules to remove the _shipped files.
Also, document minimal requirement for flex and bison.

Rationale for the minimal version:
The -Wmissing-prototypes option of GCC warns "no previous prototype"
for lexers generated by flex-2.5.34 or older, so I chose 2.5.35 as the
required version for flex.  Flex-2.5.35 was released in 2008.  Bison
looks more stable.  I did not see any problem with bison-2.0, released
in 2004.  I did not test bison-1.x, but bison-2.0 should be old enough.

Tested flex versions:
  2.5.35
  2.5.36
  2.5.37
  2.5.39
  2.6.0
  2.6.1
  2.6.2
  2.6.3   (*)
  2.6.4

 (*) flex-2.6.3 causes "yywrap redefined" warning

Tested bison versions:
  2.0
  2.1
  2.2
  2.3
  2.4
  2.4.1
  2.5.1
  2.6
  2.6.1
  2.6.2
  2.6.3
  2.6.4
  2.6.5
  2.7
  2.7.1
  3.0
  3.0.1
  3.0.2
  3.0.3
  3.0.4

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Allow users to use their favorite lexer / parser generators.
This is useful for me to test various flex and bison versions.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

$(real-objs-y) in only used in scripts/Makefile.build to form
"targets", but $(extra-y) is added to "targets" in another line.
We do not need to add $(extra-y) twice.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

For the out-of-tree build, scripts/Makefile.build creates output
directories, but this operation is not efficient.

scripts/Makefile.lib calculates obj-dirs as follows:

  obj-dirs := $(dir $(multi-objs) $(obj-y))

Please notice $(sort ...) is not used here.  Usually the result is
as many "./" as objects here.

For a lot of duplicated paths, the following command is invoked.

  _dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))

Then, the costly shell command is run over and over again.

I see many points for optimization:

[1] Use $(sort ...) to cut down duplicated paths before passing them
    to system call
[2] Use single $(shell ...) instead of repeating it with $(foreach ...)
    This will reduce forking.
[3] We can calculate obj-dirs more simply.  Most of objects are already
    accumulated in $(targets).  So, $(dir $(targets)) is fine and more
    comprehensive.

I also removed ugly code in arch/x86/entry/vdso/Makefile.  This is now
really unnecessary.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>

If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each
DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from
the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile.
It could be a race problem when building DTBS in parallel.

Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor
sub-directories, so this broke when Broadcom added one more hierarchy
in arch/arm64/boot/dts/broadcom/<soc>/.

One idea to fix the issues in a clean way is to move DTB handling
to Kbuild core scripts.  Makefile.dtbinst already recognizes dtb-y
natively, so it should not hurt to do so.

Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is
enabled.  All clutter things in Makefiles go away.

As a bonus clean-up, I also removed dts-dirs.  Just use subdir-y
directly to traverse sub-directories.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB]
Signed-off-by: Rob Herring <robh@kernel.org>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Accumulate subdir-{cc,as}flags-y directly to KBUILD_{A,C}FLAGS.
Remove KBUILD_SUBDIR_{AS,CC}FLAGS.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>

It has:
1. Move comments close to what it want to comment.
2. Comments cleanup & improvement.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

I removed all the gperf use, but not the Makefile rules.  Sam Ravnborg
says I get bonus points for cleaning this up.  I'll hold him to it.

Requested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit d5d332d3 ("devicetree: Move include prefixes from
arch to separate directory"), cross-arch DT reference works well,
but only for CPP style #include directives.

It makes as much sense to share DT between different architectures
by using DTC's /include/ directives.

So, scripts/dtc/include-prefixes should be passed to both CPP and DTC.
I refactored Makefile.lib a bit to not repeat the same path.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Having arch/$(SRCARCH)/boot/dts as an include search path is not
very useful these days because some architectures such as ARM64,
MIPS have no DT in this directory.  Instead, they have DT in vendor
sub-directories.

With some DT files in ARM and PowerPC fixed, we can now drop this
include search path.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>

This search path was added by commit b5190516 ("of: Move testcase
FDT data into drivers/of").  At that time, it was needed for platform
DT files to include testcase data.

It became unnecessary when commit ae9304c9 ("Adding selftest
testdata dynamically into live tree") introduced dynamic addition of
testcase data, but it missed to delete this search path.

Moreover, the directory drivers/of/testcase-data does not exist since
commit 19fd7487 ("of/unittest: Rename selftest.c to unittest.c").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>

We use a directory under arch/$ARCH/boot/dts as an include path
that has links outside of the subtree to find dt-bindings from under
include/dt-bindings. That's been working well, but new DT architectures
haven't been adding them by default.

Recently there's been a desire to share some of the DT material between
arm and arm64, which originally caused developers to create symlinks or
relative includes between the subtrees. This isn't ideal -- it breaks
if the DT files aren't stored in the exact same hierarchy as the kernel
tree, and generally it's just icky.

As a somewhat cleaner solution we decided to add a $ARCH/ prefix link
once, and allow DTS files to reference dtsi (and dts) files in other
architectures that way.

Original approach was to create these links under each architecture,
but it lead to the problem of recursive symlinks.

As a remedy, move the include link directories out of the architecture
trees into a common location. At the same time, they can now share one
directory and one dt-bindings/ link as well.

Fixes: 4027494a ('ARM: dts: add arm/arm64 include symlinks')
Reported-by: Russell King <linux@armlinux.org.uk>
Reported-by: Omar Sandoval <osandov@osandov.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arch <linux-arch@vger.kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

The dtc compiler version that adds initial support was available
in 4.11-rc1.  Add the ability to set an additional dtc compiler
flag is needed by overlays.

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>

KBuild abuses the asm statement to write to a file and
clang chokes about these invalid asm statements. Hack it
even more by fooling this is actual valid asm code.

[masahiro:
 Import Jeroen's work for U-Boot:
 http://patchwork.ozlabs.org/patch/375026/


 Tweak sed script a little to avoid garbage '#' for GCC case, like
 #define NR_PAGEFLAGS 23 /* __NR_PAGEFLAGS       # */ ]

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>

This part ended up in redundant code after touched by multiple
people.

[1] Commit 3234282f ("x86, asm: Fix CFI macro invocations to
deal with shortcomings in gas") added parentheses for defined
expressions to support old gas for x86.

[2] Commit a22dcdb0 ("x86, asm: Fix ancient-GAS workaround")
split the pattern into two to avoid parentheses for non-numeric
expressions.

[3] Commit 95a2f6f7 ("Partially revert patch that encloses
asm-offset.h numbers in brackets") removed parentheses from numeric
expressions as well because parentheses in MN10300 assembly have a
special meaning (pointer access).

Apparently, there is a conflict between [1] and [3].  After all,
[3] took precedence, and a long time has passed since then.

Now, merge the two patterns again because the first one is covered
by the other.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

Largely redundant code is used in different places to generate C headers
from offset information extracted from assembly language output.
Consolidate the code in Makefile.lib and use this instead.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

dtc gained new warnings checking PCI and simple buses, unit address
formatting, and stricter node and property name checking. Disable the
new dtc warnings by default as there are 1000s. As before, warnings are
enabled with W=1 or W=2. The strict node and property name checks are a
bit subjective, so they are only enabled for W=2.

Signed-off-by: Rob Herring <robh@kernel.org>

Commit db547ef1 ("Kbuild: don't add obj tree in additional includes")
causes warnings (-Wmissing-include-dirs) when compiling external modules
with KBUILD_OUTPUT set and W=1.  This is because $src can be an absolute
path to the external module source which when prefixed with -I$(srctree)/
generates an incorrect directory path.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

For more targeted fuzzing, it's better to disable kernel-wide
instrumentation and instead enable it on a per-subsystem basis.  This
follows the pattern of UBSAN and allows you to compile in the kcov
driver without instrumenting the whole kernel.

To instrument a part of the kernel, you can use either

    # for a single file in the current directory
    KCOV_INSTRUMENT_filename.o := y

or

    # for all the files in the current directory (excluding subdirectories)
    KCOV_INSTRUMENT := y

or

    # (same as above)
    ccflags-y += $(CFLAGS_KCOV)

or

    # for all the files in the current directory (including subdirectories)
    subdir-ccflags-y += $(CFLAGS_KCOV)

Link: http://lkml.kernel.org/r/1464008380-11405-1-git-send-email-vegard.nossum@oracle.com


Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When building with separate object directories and driver specific
Makefiles that add additional header include paths, Kbuild adjusts
the gcc flags so that we include both the directory in the source
tree and in the object tree.

However, due to another bug I fixed earlier, this did not actually
include the correct directory in the object tree, so we know that
we only really need the source tree here. Also, including the
object tree sometimes causes warnings about nonexisting directories
when the include path only exists in the source.

This changes the logic to only emit the -I argument for the srctree,
not for objects. We still need both $(srctree)/$(src) and $(obj)
though, so I'm adding them manually.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Marek <mmarek@suse.com>

The compiler can accept -DKBUILD_MODNAME="foo", it's just a matter of
quoting. That way, we reduce the gcc command line a bit.

Signed-off-by: Michal Marek <mmarek@suse.com>

The newly added dtc warning to check DT unit-address without reg
property and vice-versa generates lots of warnings. Turn off the check
unless building with W=1 or W=2.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: linux-kbuild@vger.kernel.org

kcov provides code coverage collection for coverage-guided fuzzing
(randomized testing).  Coverage-guided fuzzing is a testing technique
that uses coverage feedback to determine new interesting inputs to a
system.  A notable user-space example is AFL
(http://lcamtuf.coredump.cx/afl/).  However, this technique is not
widely used for kernel testing due to missing compiler and kernel
support.

kcov does not aim to collect as much coverage as possible.  It aims to
collect more or less stable coverage that is function of syscall inputs.
To achieve this goal it does not collect coverage in soft/hard
interrupts and instrumentation of some inherently non-deterministic or
non-interesting parts of kernel is disbled (e.g.  scheduler, locking).

Currently there is a single coverage collection mode (tracing), but the
API anticipates additional collection modes.  Initially I also
implemented a second mode which exposes coverage in a fixed-size hash
table of counters (what Quentin used in his original patch).  I've
dropped the second mode for simplicity.

This patch adds the necessary support on kernel side.  The complimentary
compiler support was added in gcc revision 231296.

We've used this support to build syzkaller system call fuzzer, which has
found 90 kernel bugs in just 2 months:

  https://github.com/google/syzkaller/wiki/Found-Bugs



We've also found 30+ bugs in our internal systems with syzkaller.
Another (yet unexplored) direction where kcov coverage would greatly
help is more traditional "blob mutation".  For example, mounting a
random blob as a filesystem, or receiving a random blob over wire.

Why not gcov.  Typical fuzzing loop looks as follows: (1) reset
coverage, (2) execute a bit of code, (3) collect coverage, repeat.  A
typical coverage can be just a dozen of basic blocks (e.g.  an invalid
input).  In such context gcov becomes prohibitively expensive as
reset/collect coverage steps depend on total number of basic
blocks/edges in program (in case of kernel it is about 2M).  Cost of
kcov depends only on number of executed basic blocks/edges.  On top of
that, kernel requires per-thread coverage because there are always
background threads and unrelated processes that also produce coverage.
With inlined gcov instrumentation per-thread coverage is not possible.

kcov exposes kernel PCs and control flow to user-space which is
insecure.  But debugfs should not be mapped as user accessible.

Based on a patch by Quentin Casasnovas.

[akpm@linux-foundation.org: make task_struct.kcov_mode have type `enum kcov_mode']
[akpm@linux-foundation.org: unbreak allmodconfig]
[akpm@linux-foundation.org: follow x86 Makefile layout standards]
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@google.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: David Drysdale <drysdale@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Development of dtc happens in its own upstream repository, but testing
dtc changes against the kernel tree is useful. Change dtc to a variable
that users can override.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: linux-kbuild@vger.kernel.org

UBSAN uses compile-time instrumentation to catch undefined behavior
(UB).  Compiler inserts code that perform certain kinds of checks before
operations that could cause UB.  If check fails (i.e.  UB detected)
__ubsan_handle_* function called to print error message.

So the most of the work is done by compiler.  This patch just implements
ubsan handlers printing errors.

GCC has this capability since 4.9.x [1] (see -fsanitize=undefined
option and its suboptions).
However GCC 5.x has more checkers implemented [2].
Article [3] has a bit more details about UBSAN in the GCC.

[1] - https://gcc.gnu.org/onlinedocs/gcc-4.9.0/gcc/Debugging-Options.html
[2] - https://gcc.gnu.org/onlinedocs/gcc/Debugging-Options.html
[3] - http://developerblog.redhat.com/2014/10/16/gcc-undefined-behavior-sanitizer-ubsan/

Issues which UBSAN has found thus far are:

Found bugs:

 * out-of-bounds access - 97840cb6 ("netfilter: nfnetlink: fix
   insufficient validation in nfnetlink_bind")

undefined shifts:

 * d48458d4 ("jbd2: use a better hash function for the revoke
   table")

 * 10632008 ("clockevents: Prevent shift out of bounds")

 * 'x << -1' shift in ext4 -
   http://lkml.kernel.org/r/<5444EF21.8020501@samsung.com>

 * undefined rol32(0) -
   http://lkml.kernel.org/r/<1449198241-20654-1-git-send-email-sasha.levin@oracle.com>

 * undefined dirty_ratelimit calculation -
   http://lkml.kernel.org/r/<566594E2.3050306@odin.com>

 * undefined roundown_pow_of_two(0) -
   http://lkml.kernel.org/r/<1449156616-11474-1-git-send-email-sasha.levin@oracle.com>

 * [WONTFIX] undefined shift in __bpf_prog_run -
   http://lkml.kernel.org/r/<CACT4Y+ZxoR3UjLgcNdUm4fECLMx2VdtfrENMtRRCdgHB2n0bJA@mail.gmail.com>

   WONTFIX here because it should be fixed in bpf program, not in kernel.

signed overflows:

 * 32a8df4e ("sched: Fix odd values in effective_load()
   calculations")

 * mul overflow in ntp -
   http://lkml.kernel.org/r/<1449175608-1146-1-git-send-email-sasha.levin@oracle.com>

 * incorrect conversion into rtc_time in rtc_time64_to_tm() -
   http://lkml.kernel.org/r/<1449187944-11730-1-git-send-email-sasha.levin@oracle.com>

 * unvalidated timespec in io_getevents() -
   http://lkml.kernel.org/r/<CACT4Y+bBxVYLQ6LtOKrKtnLthqLHcw-BMp3aqP3mjdAvr9FULQ@mail.gmail.com>

 * [NOTABUG] signed overflow in ktime_add_safe() -
   http://lkml.kernel.org/r/<CACT4Y+aJ4muRnWxsUe1CMnA6P8nooO33kwG-c8YZg=0Xc8rJqw@mail.gmail.com

>

[akpm@linux-foundation.org: fix unused local warning]
[akpm@linux-foundation.org: fix __int128 build woes]
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Yury Gribov <y.gribov@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It is already possible to remove CFLAGS with the CFLAGS_REMOVE option
that was introduced with commit 656ee82c ("kbuild: create new
CFLAGS_REMOVE_(basename).o option").  However it is not possible to
remove AFLAGS for assembler files.

So this patch just adds the AFLAGS_REMOVE option which works the same
like CFLAGS_REMOVE.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

This allows to write

  drm-$(CONFIG_AGP) += drm_agpsupport.o

without having to handle CONFIG_AGP=y vs. CONFIG_AGP=m. Only support
this syntax for modules, since built-in code depending on something
modular cannot work and init/Makefile actually relies on the current
semantics. There are a few drivers which adapted to the current
semantics out of necessity; these are fixed to also work when the
respective subsystem is modular.

Acked-by: Peter Chen <peter.chen@freescale.com> [chipidea]
Signed-off-by: Michal Marek <mmarek@suse.com>