ARM: pxa168: added support for Teton BGA platform

Added board defintion, header, and debug UART support.

Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

MAINTAINERS

@@ -985,6 +985,11 @@ M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/TETON BGA MACHINE SUPPORT
+M:	Mark F. Brown <mark.brown314@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+
 ARM/THECUS N2100 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

arch/arm/mach-mmp/Kconfig

@@ -57,6 +57,13 @@ config MACH_MARVELL_JASPER
 	  PXA910-based development board. Since MMP2 is compatible to
 	  ARMv6 architecture.
 
+config MACH_TETON_BGA
+	bool "Marvell's PXA168 Teton BGA Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Teton BGA Development Board.
+
 endmenu
 
 config CPU_PXA168

arch/arm/mach-mmp/Makefile

@@ -17,3 +17,4 @@ obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
 obj-$(CONFIG_MACH_FLINT)	+= flint.o
 obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
+obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o

arch/arm/mach-mmp/include/mach/teton_bga.h

+/*
+ *  linux/arch/arm/mach-mmp/include/mach/teton_bga.h
+ *
+ *  Support for the Marvell PXA168 Teton BGA Development Platform.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+#ifndef __ASM_MACH_TETON_BGA_H
+#define __ASM_MACH_TETON_BGA_H
+
+/* GPIOs */
+#define MMC_PWENA_GPIO		27
+#define USBHPENB_GPIO		55
+#define RTC_INT_GPIO		78
+#define LCD_VBLK_EN_GPIO	79
+#define LCD_DVDD_EN_GPIO	80
+#define RST_WIFI_GPIO		81
+#define CF_PWEN_GPIO		82
+#define USB_OC_GPIO		83
+#define PWM_GPIO		84
+#define USBHPENA_GPIO		85
+#define TS_INT_GPIO		86
+#define CIR_GPIO		108
+
+#endif /* __ASM_MACH_TETON_BGA_H */

arch/arm/mach-mmp/teton_bga.c

+/*
+ *  linux/arch/arm/mach-mmp/teton_bga.c
+ *
+ *  Support for the Marvell PXA168 Teton BGA Development Platform.
+ *
+ *  Author: Mark F. Brown <mark.brown314@gmail.com>
+ *
+ *  This code is based on aspenite.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/teton_bga.h>
+
+#include "common.h"
+
+static unsigned long teton_bga_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO107_UART1_TXD,
+	GPIO108_UART1_RXD,
+};
+
+static void __init teton_bga_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config));
+
+	/* on-chip devices */
+	pxa168_add_uart(1);
+}
+
+MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= mmp_map_io,
+	.nr_irqs	= IRQ_BOARD_START,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = teton_bga_init,
+MACHINE_END