- Jan 08, 2025
-
-
Jeff Johnson authored
-
Rajat Soni authored
Add support to request pdev puncture stats from firmware through HTT stats type 46. These stats give the count of number of subbands used in different wifi standards. Sample output: ------------- echo 46 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_ofdm_su_last_used_pattern_mask = 0x00000001 tx_ofdm_su_num_subbands_used_cnt_01 = 217 tx_ofdm_su_num_subbands_used_cnt_02 = 0 tx_ofdm_su_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_ax_dl_mu_ofdma_last_used_pattern_mask = 0x00000000 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_01 = 0 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_02 = 0 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_be_dl_mu_ofdma_last_used_pattern_mask = 0x00000000 tx_be_dl_mu_ofdma_num_subbands_used_cnt_01 = 0 tx_be_dl_mu_ofdma_num_subbands_used_cnt_02 = 0 tx_be_dl_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 rx_ax_ul_mu_ofdma_last_used_pattern_mask = 0x00000000 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_01 = 0 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_02 = 0 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 rx_be_ul_mu_ofdma_last_used_pattern_mask = 0x00000000 rx_be_ul_mu_ofdma_num_subbands_used_cnt_01 = 0 rx_be_ul_mu_ofdma_num_subbands_used_cnt_02 = 0 rx_be_ul_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
Rajat Soni <quic_rajson@quicinc.com> Signed-off-by:
Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by:
Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218035711.2573584-3-quic_rdevanat@quicinc.com Signed-off-by:
Jeff Johnson <jeff.johnson@oss.qualcomm.com>
-
Roopni Devanathan authored
Add support to request Address Search Table(AST) entries stats from firmware through HTT stats type 41. These stats give AST entries related information such as software peer id, MAC address, pdev id, vdev, id, next hop, etc. Sample output: ------------- echo 41 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_AST_ENTRY_TLV: ast_index = 10 mac_addr = 00:00:00:01:00:00 sw_peer_id = 0 pdev_id = 3 vdev_id = 255 next_hop = 0 mcast = 0 monitor_direct = 0 mesh_sta = 0 mec = 0 intra_bss = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Pradeep Kumar Chitrapu authored
Add support to request OFDMA stats of transmit buffers from firmware through HTT stats type 32. These stats give information about NDPA, NDP, BRP and steering mechanisms. Note: WCN7850 firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support HTT stats type 32. Sample output: ------------- echo 32 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TXBF_OFDMA_AX_NDPA_STATS_TLV: ax_ofdma_ndpa_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_ndpa_tried = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_NDP_STATS_TLV: ax_ofdma_ndp_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_ndp_tried = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_BRP_STATS_TLV: ax_ofdma_brpoll_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_brpoll_tied = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_STEER_STATS_TLV: ax_ofdma_num_ppdu_steer = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_num_usrs_prefetch = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_STEER_MPDU_STATS_TLV: rbo_steer_mpdus_tried = 0 rbo_steer_mpdus_failed = 0 sifs_steer_mpdus_tried = 0 sifs_steer_mpdus_failed = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by:
Jeff Johnson <jjohnson@kernel.org> Link: https://patch.msgid.link/20241128110949.3672364-3-quic_rdevanat@quicinc.com Signed-off-by:
-
Pradeep Kumar Chitrapu authored
Add support to request transmit rate buffer stats from firmware through HTT stats type 31. These stats give information such as MCS, NSS and bandwidth of transmit and input buffer. Sample output: ------------- echo 31 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_PDEV_TX_RATE_TXBF_STATS: Legacy OFDM Rates: 6 Mbps: 0, 9 Mbps: 0, 12 Mbps: 0, 18 Mbps: 0 24 Mbps: 0, 36 Mbps: 0, 48 Mbps: 0, 54 Mbps: 0 tx_ol_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_ibf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_txbf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_ol_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 tx_ibf_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 tx_txbf_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0 half_tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0 quarter_tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0 tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 half_tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 quarter_tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 half_tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 quarter_tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 HTT_STATS_PDEV_TXBF_FLAG_RETURN_STATS: TXBF_reason_code_stats: 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
-
Jeff Johnson authored
Signed-off-by: -
Jeff Johnson authored
-
Jeff Johnson authored
-
Sathishkumar Muruganandam authored
Currently, when the vdev start WMI cmd is sent from host, vdev related parameters such as max_reg_power, max_power, and max_antenna_gain are multiplied by 2 before being sent to the firmware. This is incorrect because the firmware uses 1 dBm steps for power calculations. This leads to incorrect power values being used in the firmware and radio, potentially causing incorrect behavior. Fix the update of max_reg_power, max_power, and max_antenna_gain values in the ath12k_mac_vdev_start_restart function, ensuring accurate power settings in the firmware by sending these values as-is, without multiplication. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by:
Santhosh Ramesh <quic_santrame@quicinc.com> Fixes: d8899132 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Acked-by:
-
Ramya Gnanasekar authored
IEEE80211_TX_STAT_NOACK_TRANSMITTED flag signifies that frame was successfully transmitted without any errors when no-ack is requested. In WMI Tx management completion path, driver is not setting IEEE80211_TX_STAT_NOACK_TRANSMITTED flag for the frames with IEEE80211_TX_CTL_NO_ACK. Without this flag, the management frame statistics will not track such frames. Add IEEE80211_TX_STAT_NOACK_TRANSMITTED flag as part of the flags in skb transmit information when WMI is processing Tx completion for management frames. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by:
Muna Sinada <quic_msinada@quicinc.com> Acked-by:
-
Raj Kumar Bhagat authored
The current firmware coredump collection in ath12k does not include the MLO_GLOBAL_MEM_REGION_TYPE memory. This memory region is essential for debugging issues related to Multi-Link Operation (MLO). Hence, add support to include MLO_GLOBAL_MEM_REGION_TYPE memory in firmware coredump collection. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by:
-
Aditya Kumar Singh authored
ieee80211_radar_detected() expects the driver to pass a channel context configuration during MLO. This is used to identify exactly which link detected the radar. Add support to pass this to mac80211. Since the link arvif is not known in the WMI event, introduce a helper iterator API, ath12k_mac_get_any_chanctx_conf_iter(), to get the channel context configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by:
-
Aditya Kumar Singh authored
Currently, the DFS CAC time and the usable state of the primary channel in the channel definition are used to set the CAC_RUNNING flag for the ath12k radio structure. However, this approach is flawed because there are channel definitions where the primary channel is not a DFS channel, but the secondary channel is. For example, in 5 GHz band, channel 36 with 160 MHz bandwidth. In such cases, the flag is not set correctly and hence places where this flag is tested will not operate as expected. For example, Rx packets will not be dropped. To fix this issue, use the cfg80211_chandef_dfs_usable() function from cfg80211, which returns true if at least one channel is in a usable state. This will ensure the CAC_RUNNING flag is set properly. Additionally, update the CAC running debug log message to include the CAC time in milliseconds and also print the center frequency segment 1. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aditya Kumar Singh authored
Rename the flag ATH12K_CAC_RUNNING to ATH12K_FLAG_CAC_RUNNING to correct the naming inconsistency in the enum ath12k_dev_flags. No functionality changes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
- Jan 03, 2025
-
-
Bob Copeland authored
Signed-off-by:Bob Copeland <me@bobcopeland.com>
-
Bob Copeland authored
-
Bob Copeland authored
-
- Dec 30, 2024
-
-
Add MHI controller configuration for QDU100 device. The Qualcomm X100 5G RAN Accelerator card is designed to enhance Open vRAN servers by offloading CPUs from intensive 5G baseband functions. Link: https://docs.qualcomm.com/bundle/publicresource/87-79371-1_REV_A_Qualcomm_X100_5G_RAN_Accelerator_Card_Product_Brief.pdf Signed-off-by:
Vivek Pernamitta <quic_vpernami@quicinc.com> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20241212-qdu100_us-v5-1-3349fb23512a@quicinc.com Signed-off-by:
-
- Dec 29, 2024
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Fix a procfs task state reporting regression when freezing sleeping tasks" * tag 'sched-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: freezer, sched: Report frozen tasks as 'D' instead of 'R'
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: - Fix a hang in the "kernel IBT no ENDBR" self-test that may trigger on FRED systems, caused by incomplete FRED state cleanup in the #CP fault handler - Improve TDX (Coco VM) guest unrecoverable error handling to not potentially leak decrypted memory * tag 'x86-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: virt: tdx-guest: Just leak decrypted memory on unrecoverable errors x86/fred: Clear WFE in missing-ENDBRANCH #CPs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fixes from Ingo Molnar: - Fix Intel Lunar Lake build-in event definitions - Fall back to (compatible) legacy features on new Intel PEBS format v6 hardware - Enable uncore support on Intel Clearwater Forest CPUs, which is the same as the existing Sierra Forest uncore driver * tag 'perf-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix bitmask of OCR and FRONTEND events for LNC perf/x86/intel/ds: Add PEBS format 6 perf/x86/intel/uncore: Add Clearwater Forest support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Ingo Molnar: "Fix false positive objtool build warning related to a noreturn function in the bcachefs code" * tag 'objtool-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Add bch2_trans_unlocked_error() to bcachefs noreturns
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Ingo Molnar: "Fix missed rtmutex wakeups causing sporadic boot hangs and other misbehavior" * tag 'locking-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Make sure we wake anything on the wake_q when we release the lock->wait_lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Ingo Molnar: "Fix bogus MSI IRQ setup warning on RISC-V" * tag 'irq-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Handle lack of irqdomain gracefully
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A few more fixes that accumulated over the last two weeks, fixing some user reported problems: - swapfile fixes: - conditional reschedule in the activation loop - fix race with memory mapped file when activating - make activation loop interruptible - rework and fix extent sharing checks - folio fixes: - in send, recheck folio mapping after unlock - in relocation, recheck folio mapping after unlock - fix waiting for encoded read io_uring requests - fix transaction atomicity when enabling simple quotas - move COW block trace point before the block gets freed - print various sizes in sysfs with correct endianity" * tag 'for-6.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: sysfs: fix direct super block member reads btrfs: fix transaction atomicity bug when enabling simple quotas btrfs: avoid monopolizing a core when activating a swap file btrfs: allow swap activation to be interruptible btrfs: fix swap file activation failure due to extents that used to be shared btrfs: fix race with memory mapped writes when activating swap file btrfs: check folio mapping after unlock in put_file_data() btrfs: check folio mapping after unlock in relocate_one_folio() btrfs: fix use-after-free when COWing tree bock and tracing is enabled btrfs: fix use-after-free waiting for encoded read endios -
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: - IMX: fix stop condition in single master mode and add compatible string for errata adherence - Microchip: Add support for proper repeated sends and fix unnecessary NAKs on empty messages, which caused false bus detection * tag 'i2c-for-6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: microchip-core: fix "ghost" detections i2c: microchip-core: actually use repeated sends i2c: imx: add imx7d compatible string for applying erratum ERR007805 i2c: imx: fix missing stop condition in single-master mode
-
Li RongQing authored
In CoCo VMs it is possible for the untrusted host to cause set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. Leak the decrypted memory when set_memory_decrypted() fails, and don't need to print an error since set_memory_decrypted() will call WARN_ONCE(). Fixes: f4738f56 ("virt: tdx-guest: Add Quote generation support using TSM_REPORTS") Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Reviewed-by:
Rick Edgecombe <rick.p.edgecombe@intel.com> Reviewed-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20240619111801.25630-1-lirongqing%40baidu.com
-
Xin Li (Intel) authored
An indirect branch instruction sets the CPU indirect branch tracker (IBT) into WAIT_FOR_ENDBRANCH (WFE) state and WFE stays asserted across the instruction boundary. When the decoder finds an inappropriate instruction while WFE is set ENDBR, the CPU raises a #CP fault. For the "kernel IBT no ENDBR" selftest where #CPs are deliberately triggered, the WFE state of the interrupted context needs to be cleared to let execution continue. Otherwise when the CPU resumes from the instruction that just caused the previous #CP, another missing-ENDBRANCH #CP is raised and the CPU enters a dead loop. This is not a problem with IDT because it doesn't preserve WFE and IRET doesn't set WFE. But FRED provides space on the entry stack (in an expanded CS area) to save and restore the WFE state, thus the WFE state is no longer clobbered, so software must clear it. Clear WFE to avoid dead looping in ibt_clear_fred_wfe() and the !ibt_fatal code path when execution is allowed to continue. Clobbering WFE in any other circumstance is a security-relevant bug. [ dhansen: changelog rewording ] Fixes: a5f6c2ac ("x86/shstk: Add user control-protection fault handler") Signed-off-by:
Xin Li (Intel) <xin@zytor.com> Signed-off-by:
-
Chen Ridong authored
Before commit: f5d39b02 ("freezer,sched: Rewrite core freezer logic") the frozen task stat was reported as 'D' in cgroup v1. However, after rewriting the core freezer logic, the frozen task stat is reported as 'R'. This is confusing, especially when a task with stat of 'S' is frozen. This bug can be reproduced with these steps: $ cd /sys/fs/cgroup/freezer/ $ mkdir test $ sleep 1000 & [1] 739 // task whose stat is 'S' $ echo 739 > test/cgroup.procs $ echo FROZEN > test/freezer.state $ ps -aux | grep 739 root 739 0.1 0.0 8376 1812 pts/0 R 10:56 0:00 sleep 1000 As shown above, a task whose stat is 'S' was changed to 'R' when it was frozen. To solve this regression, simply maintain the same reported state as before the rewrite. [ mingo: Enhanced the changelog and comments ] Fixes: f5d39b02 ("freezer,sched: Rewrite core freezer logic") Signed-off-by:
Chen Ridong <chenridong@huawei.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
Michal Koutný <mkoutny@suse.com> Link: https://lore.kernel.org/r/20241217004818.3200515-1-chenridong@huaweicloud.com
-
chenchangcheng authored
Fix the following objtool warning during build time: fs/bcachefs/btree_trans_commit.o: warning: objtool: bch2_trans_commit_write_locked.isra.0() falls through to next function do_bch2_trans_commit.isra.0() fs/bcachefs/btree_trans_commit.o: warning: objtool: .text: unexpected end of section ...... fs/bcachefs/btree_update.o: warning: objtool: bch2_trans_update_get_key_cache() falls through to next function flush_new_cached_update() fs/bcachefs/btree_update.o: warning: objtool: flush_new_cached_update() falls through to next function bch2_trans_update_by_path() bch2_trans_unlocked_error() is an Obviously Correct (tm) panic() wrapper, add it to the list of known noreturns. [ mingo: Improved the changelog ] Fixes: fd104e29 ("bcachefs: bch2_trans_verify_not_unlocked()") Signed-off-by:chenchangcheng <chenchangcheng@kylinos.cn> Signed-off-by:
-
- Dec 28, 2024
-
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fix from Jens Axboe: "Just a single fix for ublk setup error handling" * tag 'block-6.13-20241228' of git://git.kernel.dk/linux: ublk: detach gendisk from ublk device if add_disk() fails
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Just a single fix for a theoretical issue with SQPOLL setup" * tag 'io_uring-6.13-20241228' of git://git.kernel.dk/linux: io_uring/sqpoll: fix sqpoll error handling races
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - fix caching of files that will be reused for write - minor cleanup * tag '6.13-rc4-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Remove unused is_server_using_iface() smb: enable reuse of deferred file handles for write operations
-
- Dec 27, 2024
-
-
Linus Torvalds authored
Merge tag 'trace-tools-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing tool fix from Steven Rostedt: - Fix rtla divide by zero when the count is zero in histograms * tag 'trace-tools-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: rtla/timerlat: Fix histogram ALL for zero samples
-
Wolfram Sang authored
Merge tag 'i2c-host-fixes-6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current i2c-host-fixes for v6.13-rc5 - IMX: fixed stop condition in single master mode and added compatible string for errata adherence. - Microchip: Added support for proper repeated sends and fixed unnecessary NAKs on empty messages, which caused false bus detection.
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply fixes from Sebastian Reichel: - fix potential array out of bounds access in gpio-charger - cros_charge-control: - fix concurrent sysfs access - allow start_threshold == end_threshold - workaround limited v2 charge threshold API - bq24296: fix vbus regulator handling * tag 'for-v6.13-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: bq24190: Fix BQ24296 Vbus regulator support power: supply: cros_charge-control: hide start threshold on v2 cmd power: supply: cros_charge-control: allow start_threshold == end_threshold power: supply: cros_charge-control: add mutex for driver data power: supply: gpio-charger: Fix set charge current limits -
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Madhavan Srinivasan: - Add close() callback in vas_vm_ops struct for proper cleanup Thanks to Haren Myneni. * tag 'powerpc-6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries/vas: Add close() callback in vas_vm_ops struct
-
Linus Torvalds authored
Merge tag 'probes-fixes-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fix from Masami Hiramatsu: "Change the priority of the module callback of kprobe events so that it is called after the jump label list on the module is updated. This ensures the kprobe can check whether it is not on the jump label address correctly" * tag 'probes-fixes-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/kprobe: Make trace_kprobe's module callback called after jump_label update
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull hardening fix from Kees Cook: - stddef: make __struct_group() UAPI C++-friendly (Alexander Lobakin) * tag 'hardening-v6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: stddef: make __struct_group() UAPI C++-friendly
-
