Select Git revision
Search by author
- Any Author
- authors
-
72162444 72162444 gaochangning
-
Aaron Kim akim
-
Aaron Kloc akloc
-
Aaron Nabil aaronna
-
Abel Fang abel_fang
-
Abhijit Adsule adsule
-
Abhishek Kar abhiskar
-
Adam Ford aford
-
Adam Radlinski adam.radlinski.1
-
Adam Snyder adsnyder
-
Adam Xue axue
-
Adam Yeh adam.yeh
-
Adigarla Devi adigarla.devi
-
adithya kalyan adithyakalyan_bh
-
aditya gunda agunda
-
Adrien Martinez adrien.martinez
-
Agathon Jung agathon.jung
-
Ahmed Ibrahim ahmedibrahim
-
Ahmet Ugur Ilter ugur.ilter
-
Ahming Chrn ahmingchen
- Jan 14, 2025
-
-
Felix Fietkau authored
Preparation for MLO support. Link: https://patch.msgid.link/20250102163508.52945-5-nbd@nbd.name Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Preparation for splitting link data from vif data for MLO support. Link: https://patch.msgid.link/20250102163508.52945-4-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
Preparation to use it for private bss link data instead of the full vif on MLO capable devices. Link: https://patch.msgid.link/20250102163508.52945-3-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
Preparation for supporting a single hw with multiple radios Link: https://patch.msgid.link/20250102163508.52945-2-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
Preparation for supporting multiple radios on a single wiphy on devices where firmware does not support actual hardware scanning. This is also a prerequisite for full MLO support Co-developed-by:
Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by:
Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by:
Shayne Chen <shayne.chen@mediatek.com> Signed-off-by:
-
Felix Fietkau authored
Fixes linked list management issues during restart, where sta entries can be recreated and reinitialized while still in the poll list, triggering kernel warnings. Link: https://patch.msgid.link/20241230194202.95065-14-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
Allows adding stations before assoc, though they are not passed to the firmware yet at that point. Link: https://patch.msgid.link/20241230194202.95065-13-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
Reset per-phy mac address slot mask in order to avoid leaking entries. Fixes: 8a55712d ("wifi: mt76: mt7915: enable full system reset support") Link: https://patch.msgid.link/20241230194202.95065-12-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
It seems that the firmware checks the register used for detecting matching PCIe links in order to figure out if a secondary PCIe link is enabled. Write the register again just before starting the firmware on hw reset, in order to fix an issue that left the second band unusable after restart. Fixes: 9093cfff ("mt76: mt7915: add support for using a secondary PCIe link for gen1") Link: https://patch.msgid.link/20241230194202.95065-11-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
Avoid issuing MCU calls during a hardware restart Link: https://patch.msgid.link/20241230194202.95065-10-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
When a client is roaming to a different AP interface, a duplicate wtbl entry can be created. This can lead to lost packets or aggregation issues until the old entry expires. In order to fix this issue, delete any conflicting entries from WTBL whenever a station is authorized. Link: https://patch.msgid.link/20241230194202.95065-9-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
Avoids sending packets too early Fixes: 0b3be9d1 ("wifi: mt76: add separate tx scheduling queue for off-channel tx") Link: https://patch.msgid.link/20241230194202.95065-8-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
This allows faster recovery from firmware issues Link: https://patch.msgid.link/20241230194202.95065-7-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
The need to retry a command is really uncommon. Reduce the retries to 1 to speed up recovery from firmware issues. Link: https://patch.msgid.link/20241230194202.95065-6-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
Fix rx filter setting to prevent dropping NDPA frames. Without this change, bfee functionality may behave abnormally. Fixes: 98686cd2 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Link: https://patch.msgid.link/20241230194202.95065-5-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
Use the default firmware values Link: https://patch.msgid.link/20241230194202.95065-4-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
It should only be set to 20 for long slot time on 2.4 GHz Link: https://patch.msgid.link/20241230194202.95065-3-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
It is unused Link: https://patch.msgid.link/20241230194202.95065-2-nbd@nbd.name Signed-off-by:
-
Felix Fietkau authored
It is only used in mt76_connac2_mac_tx_rate_val, inline it there. Link: https://patch.msgid.link/20241230194202.95065-1-nbd@nbd.name Signed-off-by:
-
Nick Morrow authored
Add VID/PID 35bc/0107 for recently released TP-Link TXE50UH USB WiFi adapter. Tested-by:
Shang Chieh Tseng <shangchieh.tseng@tsengsy.com> Signed-off-by:
Nick Morrow <usbwifi2024@gmail.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/e797f105-9ca8-41e9-96de-7d25dec09943@gmail.com Signed-off-by:
-
Zhang Kunbo authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last, which is beneficial to cultivate a high-quality code.[2] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by:Zhang Kunbo <zhangkunbo@huawei.com> Link: https://patch.msgid.link/20241218074552.3271542-1-zhangkunbo@huawei.com Signed-off-by:
-
Allan Wang authored
Add mac80211 rfkill_poll ops to monitor hardware rfkill state and state change will be updated. Signed-off-by:
Allan Wang <allan.wang@mediatek.com> Link: https://patch.msgid.link/20241209070922.28106-1-allan.wang@mediatek.com Signed-off-by:
-
Leon Yen authored
Add CSA (Channel Switch Announcement) related implementation in collaboration with mac80211 to deal with dynamic channel switching. Signed-off-by:
Leon Yen <leon.yen@mediatek.com> Signed-off-by:
Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20241107061440.6545-1-mingyen.hsieh@mediatek.com Signed-off-by:
-
Michael Lo authored
To optimize the scan time of mt7925, remove the dwell time setting for the scan command and let it be controlled by the firmware as mt7921. Signed-off-by:
Michael Lo <michael.lo@mediatek.com> Signed-off-by:
-
Quan Zhou authored
In dma init or reset scene, full buffer is needed for all rx rings. Since this is very time consuming, split the function to perform initial allocation without holding the spinlock. This avoids causing excessive scheduler latency. Signed-off-by:
Quan Zhou <quan.zhou@mediatek.com> Reviewed-by:
Deren Wu <deren.wu@mediatek.com> Link: https://patch.msgid.link/57c68a7ce1dd9022fa5e06af2c53d6313f30ec83.1731069062.git.quan.zhou@mediatek.com Signed-off-by:
-
Ming Yen Hsieh authored
Properly retrieve the response for commands with events. Ensure accurate handling of event-driven commands. Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/20241211011926.5002-17-sean.wang@kernel.org Signed-off-by:
-
Ming Yen Hsieh authored
Clean up MLO settings after disconnection. Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
-
Ming Yen Hsieh authored
Update mt7925_mcu_uni_[tx,rx]_ba for MLO support in firmware. Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
-
Ming Yen Hsieh authored
Initialize secondary link PM state. Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
-
Ming Yen Hsieh authored
Update the power-saving flow for secondary links. Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
-
Ming Yen Hsieh authored
Update mt7925_unassign_vif_chanctx to support per-link BSS. Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
-
Ming Yen Hsieh authored
Update mt792x_rx_get_wcid to support per-link STA. Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
-
Ming Yen Hsieh authored
Update mt7925_mcu_sta_update for broadcast (BC) in the ASSOC state. Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
-
Ming Yen Hsieh authored
Enhance mt7925_mac_link_sta_add to support MLO. Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
-
Ming Yen Hsieh authored
In mt7925_mac_link_bss_add(), the mt76_connac_mcu_uni_add_dev() function must be executed only after all parameters have been properly initialized. Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
-
Leon Yen authored
Fix CNM command timeout issue when only a single active link is available during MLO connection to fix the following kernel log error. [ 741.931030] wlan0: [link 1] local address be:90:e0:22:c4:22, AP link address 08:0c:43:7a:19:2a [ 741.931042] wlan0: [link 1] determined AP 08:0c:43:7a:19:2a to be EHT [ 741.931052] wlan0: [link 1] connecting with EHT mode, max bandwidth 160 MHz [ 741.931071] wlan0: WMM AC=0 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0, downgraded=0 [ 741.931076] wlan0: WMM AC=1 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0, downgraded=0 [ 741.931080] wlan0: WMM AC=2 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0, downgraded=0 [ 741.931085] wlan0: WMM AC=3 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0, downgraded=0 [ 741.931095] wlan0: moving STA 22:0c:43:7a:19:2a to state 3 [ 749.090928] mt7925e 0000:2b:00.0: Message 00020002 (seq 15) timeout [ 752.162972] mt7925e 0000:2b:00.0: Message 00020003 (seq 1) timeout [ 755.234975] mt7925e 0000:2b:00.0: Message 00020002 (seq 2) timeout [ 758.306971] mt7925e 0000:2b:00.0: Message 00020004 (seq 3) timeout Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
-
Ming Yen Hsieh authored
Fix incorrect parameters for the related channel information command. Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
-
allan.wang authored
Fix incorrect WCID phy_idx assignment. Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
-
Ming Yen Hsieh authored
For MLO, each link must have a corresponding WCID. Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
-
Ming Yen Hsieh authored
For this TLV, the address should be set to the MLD address rather than the link address. Fixes: 86c051f2 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Signed-off-by:
-
