Add the nodes for DSB subunit MSR(mux select register) support.
The TPDM MSR (mux select register) interface is an optional
interface and associated bank of registers per TPDM subunit.
The intent of mux select registers is to control muxing structures
driving the TPDM’s’ various subunit interfaces.

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>

Add property "qcom,dsb_msr_num" to support DSB(Discrete Single
Bit) MSR(mux select register) for TPDM. It specifies the number
of MSR registers supported by the DSB TDPM.

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>

Add nodes to configure the timestamp request based on input
pattern match. Each TPDM that support DSB subunit has maximum of
n(n<7) TPR registers to configure value for timestamp request
based on input pattern match. Eight 32 bit registers providing
DSB interface timestamp request  pattern match comparison. And
each TPDM that support DSB subunit has maximum of m(m<7) TPMR
registers to configure pattern mask for timestamp request. Eight
32 bit registers providing DSB interface timestamp request
pattern match mask generation. Add nodes to enable/disable
pattern timestamp and set pattern timestamp type.

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>

Add nodes to configure trigger pattern and trigger pattern mask.
Each DSB subunit TPDM has maximum of n(n<7) XPR registers to
configure trigger pattern match output. Eight 32 bit registers
providing DSB interface trigger output pattern match comparison.
And each DSB subunit TPDM has maximum of m(m<7) XPMR registers to
configure trigger pattern mask match output. Eight 32 bit
registers providing DSB interface trigger output pattern match
mask.

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>

Add the nodes to set value for DSB edge control and DSB edge
control mask. Each DSB subunit TPDM has maximum of n(n<16) EDCR
resgisters to configure edge control. DSB edge detection control
00: Rising edge detection
01: Falling edge detection
10: Rising and falling edge detection (toggle detection)
And each DSB subunit TPDM has maximum of m(m<8) ECDMR registers to
configure mask. Eight 32 bit registers providing DSB interface
edge detection mask control.

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>

Add node to set and show programming mode for TPDM DSB subunit.
Once the DSB programming mode is set, it will be written to the
register DSB_CR. Bit[10:9] of the DSB_CR register is used to set
the DSB test mode.

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>

The nodes are needed to set or show the trigger timestamp and
trigger type. This change is to add these nodes to achieve these
function.

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>

DSB is used for monitoring “events”. Events are something that
occurs at some point in time. It could be a state decode, the
act of writing/reading a particular address, a FIFO being empty,
etc. This decoding of the event desired is done outside TPDM.
DSB subunit need to be configured in enablement and disablement.
A struct that specifics associated to dsb dataset is needed. It
saves the configuration and parameters of the dsb datasets. This
change is to add this struct and initialize the configuration of
DSB subunit.

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>

Read the DSB element size from the device tree. Set the register
bit that controls the DSB element size of the corresponding port.

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>

Add property "qcom,dsb-elem-size" to support DSB(Discrete Single
Bit) element for TPDM. The associated aggregator will read this
size before it is enabled. DSB element size currently only
supports 32-bit and 64-bit.

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>

The CTI module has some hard coded refcounting code that has a leak.
For example running perf and then trying to unload it fails:

  perf record -e cs_etm// -a -- ls
  rmmod coresight_cti

  rmmod: ERROR: Module coresight_cti is in use

The coresight core already handles references of devices in use, so by
making CTI a normal helper device, we get working refcounting for free.

Signed-off-by: James Clark <james.clark@arm.com>

Currently CATU is the only helper device, and its enable and disable
calls are hard coded. To allow more helper devices to be added in a
generic way, remove these hard coded calls and just enable and disable
all helper devices.

This has to apply to helpers adjacent to the path, because they will
never be in the path. CATU was already discovered in this way, so
there is no change there.

One change that is needed is for CATU to call back into ETR to allocate
the buffer. Because the enable call was previously hard coded, it was
done at a point where the buffer was already allocated, but this is no
longer the case.

Signed-off-by: James Clark <james.clark@arm.com>

When CATU is moved to the generic enable/disable path system in the
next commit, it will need to call into ETR and get it to pre-allocate
its buffer so add a function for it.

No functional changes

Signed-off-by: James Clark <james.clark@arm.com>

This will allow CATU to get its associated ETR in a generic way where
currently the enable path has some hard coded searches which avoid
the need to store input connections.

Signed-off-by: James Clark <james.clark@arm.com>

Add a function for adding connections dynamically. This also removes
the 1:1 mapping between port number and the index into the connections
array. The only place this mapping was used was in the warning for
duplicate output ports, which has been replaced by a search. Other
uses of the port number already use the port member variable.

Being able to dynamically add connections will allow other devices like
CTI to re-use the connection mechanism despite not having explicit
connections described in the DT.

Signed-off-by: James Clark <james.clark@arm.com>

References to outport and child_port will be confusing when we use the
same struct for inputs as well as outputs. Rename the members to refer
to the position in terms of local and remote instead.

Signed-off-by: James Clark <james.clark@arm.com>

Rename to avoid confusion between port number and the index in the
connection array. The port number is already stored in the connection,
and in a later commit the connection array will be appended to, so
the length of it will no longer reflect the number of ports.

No functional changes.

Signed-off-by: James Clark <james.clark@arm.com>

conns is actually for output connections. Change the name to make it
clearer and so that we can add input connections later.

No functional changes.

Signed-off-by: James Clark <james.clark@arm.com>

mode is stored as a local_t, but it is also passed around a lot as a
plain u32, so use the correct type wherever local_t isn't currently
used. This helps a little bit with readability.

Signed-off-by: James Clark <james.clark@arm.com>

Now that it exists, use it instead of doing the multiplication manually.

Signed-off-by: James Clark <james.clark@arm.com>

Now that it exists, use it instead of doing the multiplication and
checking for overflow manually.

Signed-off-by: James Clark <james.clark@arm.com>

Now that it exists, use it instead of doing the multiplication manually.

Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>

There is no krealloc_array equivalent in devres. Users would have to
do their own multiplication overflow check so provide one.

Signed-off-by: James Clark <james.clark@arm.com>

Pull cifs client fixes from Steve French:
 "Seven cifs/smb3 client fixes, all also for stable:

   - four DFS fixes

   - multichannel reconnect fix

   - fix smb1 stats for cancel command

   - fix for set file size error path"

* tag '6.3-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: use DFS root session instead of tcon ses
  cifs: return DFS root session id in DebugData
  cifs: fix use-after-free bug in refresh_cache_worker()
  cifs: set DFS root session in cifs_get_smb_ses()
  cifs: generate signkey for the channel that's reconnecting
  cifs: Fix smb2_set_path_size()
  cifs: Move the in_send statistic to __smb_send_rqst()

Pull kvm fixes from Paolo Bonzini:
 "ARM64:

   - Address a rather annoying bug w.r.t. guest timer offsetting. The
     synchronization of timer offsets between vCPUs was broken, leading
     to inconsistent timer reads within the VM.

  x86:

   - New tests for the slow path of the EVTCHNOP_send Xen hypercall

   - Add missing nVMX consistency checks for CR0 and CR4

   - Fix bug that broke AMD GATag on 512 vCPU machines

  Selftests:

   - Skip hugetlb tests if huge pages are not available

   - Sync KVM exit reasons"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: selftests: Sync KVM exit reasons in selftests
  KVM: selftests: Add macro to generate KVM exit reason strings
  KVM: selftests: Print expected and actual exit reason in KVM exit reason assert
  KVM: selftests: Make vCPU exit reason test assertion common
  KVM: selftests: Add EVTCHNOP_send slow path test to xen_shinfo_test
  KVM: selftests: Use enum for test numbers in xen_shinfo_test
  KVM: selftests: Add helpers to make Xen-style VMCALL/VMMCALL hypercalls
  KVM: selftests: Move the guts of kvm_hypercall() to a separate macro
  KVM: SVM: WARN if GATag generation drops VM or vCPU ID information
  KVM: SVM: Modify AVIC GATag to support max number of 512 vCPUs
  KVM: SVM: Fix a benign off-by-one bug in AVIC physical table mask
  selftests: KVM: skip hugetlb tests if huge pages are not available
  KVM: VMX: Use tabs instead of spaces for indentation
  KVM: VMX: Fix indentation coding style issue
  KVM: nVMX: remove unnecessary #ifdef
  KVM: nVMX: add missing consistency checks for CR0 and CR4
  KVM: arm64: timers: Convert per-vcpu virtual offset to a global value

Merge tag 'linux-kselftest-fixes-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "A fix to amd-pstate test Makefile and a fix to LLVM build for x86 in
  kselftest common lib.mk"

* tag 'linux-kselftest-fixes-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: fix LLVM build for i386 and x86_64
  selftests: amd-pstate: fix TEST_FILES

Use DFS root session whenever possible to get new DFS referrals
otherwise we might end up with an IPC tcon (tcon->ses->tcon_ipc) that
doesn't respond to them.  It should be safe accessing
@ses->dfs_root_ses directly in cifs_inval_name_dfs_link_error() as it
has same lifetime as of @tcon.

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Steve French <stfrench@microsoft.com>

Return the DFS root session id in /proc/fs/cifs/DebugData to make it
easier to track which IPC tcon was used to get new DFS referrals for a
specific connection, and aids in debugging.

A simple output of it would be

  Sessions:
  1) Address: 192.168.1.13 Uses: 1 Capability: 0x300067   Session Status: 1
  Security type: RawNTLMSSP  SessionId: 0xd80000000009
  User: 0 Cred User: 0
  DFS root session id: 0x128006c000035

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Steve French <stfrench@microsoft.com>

The getaffinity() system call uses 'cpumask_size()' to decide how big
the CPU mask is - so far so good.  It is indeed the allocation size of a
cpumask.

But the code also assumes that the whole allocation is initialized
without actually doing so itself.  That's wrong, because we might have
fixed-size allocations (making copying and clearing more efficient), but
not all of it is then necessarily used if 'nr_cpu_ids' is smaller.

Having checked other users of 'cpumask_size()', they all seem to be ok,
either using it purely for the allocation size, or explicitly zeroing
the cpumask before using the size in bytes to copy it.

See for example the ublk_ctrl_get_queue_affinity() function that uses
the proper 'zalloc_cpumask_var()' to make sure that the whole mask is
cleared, whether the storage is on the stack or if it was an external
allocation.

Fix this by just zeroing the allocation before using it.  Do the same
for the compat version of s...

The UAF bug occurred because we were putting DFS root sessions in
cifs_umount() while DFS cache refresher was being executed.

Make DFS root sessions have same lifetime as DFS tcons so we can avoid
the use-after-free bug is DFS cache refresher and other places that
require IPCs to get new DFS referrals on.  Also, get rid of mount
group handling in DFS cache as we no longer need it.

This fixes below use-after-free bug catched by KASAN

[ 379.946955] BUG: KASAN: use-after-free in __refresh_tcon.isra.0+0x10b/0xc10 [cifs]
[ 379.947642] Read of size 8 at addr ffff888018f57030 by task kworker/u4:3/56
[ 379.948096]
[ 379.948208] CPU: 0 PID: 56 Comm: kworker/u4:3 Not tainted 6.2.0-rc7-lku #23
[ 379.948661] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014
[ 379.949368] Workqueue: cifs-dfscache refresh_cache_worker [cifs]
[ 379.949942] Call Trace:
[ 379.950113] <TASK>
[ 379.950260] dump_stack_lvl+0x50/0x67
[ 379.950510] print_report+0x16a/0x48e
[ 379.950759] ? __virt_addr_valid+0xd8/0x160
[ 379.951040] ? __phys_addr+0x41/0x80
[ 379.951285] kasan_report+0xdb/0x110
[ 379.951533] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs]
[ 379.952056] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs]
[ 379.952585] __refresh_tcon.isra.0+0x10b/0xc10 [cifs]
[ 379.953096] ? __pfx___refresh_tcon.isra.0+0x10/0x10 [cifs]
[ 379.953637] ? __pfx___mutex_lock+0x10/0x10
[ 379.953915] ? lock_release+0xb6/0x720
[ 379.954167] ? __pfx_lock_acquire+0x10/0x10
[ 379.954443] ? refresh_cache_worker+0x34e/0x6d0 [cifs]
[ 379.954960] ? __pfx_wb_workfn+0x10/0x10
[ 379.955239] refresh_cache_worker+0x4ad/0x6d0 [cifs]
[ 379.955755] ? __pfx_refresh_cache_worker+0x10/0x10 [cifs]
[ 379.956323] ? __pfx_lock_acquired+0x10/0x10
[ 379.956615] ? read_word_at_a_time+0xe/0x20
[ 379.956898] ? lockdep_hardirqs_on_prepare+0x12/0x220
[ 379.957235] process_one_work+0x535/0x990
[ 379.957509] ? __pfx_process_one_work+0x10/0x10
[ 379.957812] ? lock_acquired+0xb7/0x5f0
[ 379.958069] ? __list_add_valid+0x37/0xd0
[ 379.958341] ? __list_add_valid+0x37/0xd0
[ 379.958611] worker_thread+0x8e/0x630
[ 379.958861] ? __pfx_worker_thread+0x10/0x10
[ 379.959148] kthread+0x17d/0x1b0
[ 379.959369] ? __pfx_kthread+0x10/0x10
[ 379.959630] ret_from_fork+0x2c/0x50
[ 379.959879] </TASK>

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Steve French <stfrench@microsoft.com>

Set the DFS root session pointer earlier when creating a new SMB
session to prevent racing with smb2_reconnect(), cifs_reconnect_tcon()
and DFS cache refresher.

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'mm-hotfixes-stable-2023-03-14-16-51' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "Eleven hotfixes.

  Four of these are cc:stable and the remainder address post-6.2 issues
  or aren't considered suitable for backporting.

  Seven of these fixes are for MM"

* tag 'mm-hotfixes-stable-2023-03-14-16-51' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/damon/paddr: fix folio_nr_pages() after folio_put() in damon_pa_mark_accessed_or_deactivate()
  mm/damon/paddr: fix folio_size() call after folio_put() in damon_pa_young()
  ocfs2: fix data corruption after failed write
  migrate_pages: try migrate in batch asynchronously firstly
  migrate_pages: move split folios processing out of migrate_pages_batch()
  migrate_pages: fix deadlock in batched migration
  .mailmap: add Alexandre Ghiti personal email address
  mailmap: correct Dikshita Agarwal's Qualcomm email address
  mailmap: updates for Jarkko Sakkinen
  mm/userfaultfd: propagate uffd-wp bit when PTE-mapping the huge zeropage
  mm: teach mincore_hugetlb about pte markers

Pull tracing fixes from Steven Rostedt:

 - Do not allow histogram values to have modifies. They can cause a NULL
   pointer dereference if they do.

 - Warn if hist_field_name() is passed a NULL. Prevent the NULL pointer
   dereference mentioned above.

 - Fix invalid address look up race in lookup_rec()

 - Define ftrace_stub_graph conditionally to prevent linker errors

 - Always check if RCU is watching at all tracepoint locations

* tag 'trace-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Make tracepoint lockdep check actually test something
  ftrace,kcfi: Define ftrace_stub_graph conditionally
  ftrace: Fix invalid address access in lookup_rec() when index is 0
  tracing: Check field value in hist_field_name()
  tracing: Do not let histogram values have some modifiers

Pull zstd fixes from Nick Terrell:
 "A small number of fixes for zstd-v1.5.2.

  I'm not pulling in zstd-v1.5.4 from upstream this release because it
  didn't have any time to bake in linux-next, but I'm aiming for the
  next update in v6.4"

* tag 'zstd-linus-v6.3-rc3' of https://github.com/terrelln/linux:
  zstd: Fix definition of assert()
  lib: zstd: Backport fix for in-place decompression
  lib: zstd: Fix -Wstringop-overflow warning

Pull clk fixes from Stephen Boyd:
 "A collection of clk driver fixes, and a couple OF clk patches to fix
  regressions seen in the last few weeks. The fwnode patch broke the
  build for one driver that isn't always compiled, so I waited over the
  weekend to be certain no more build issues came up.

   - Mark the firmware node (fwnode) that matches the compatible in
     CLK_OF_DECLARE() as initialized to fix a regression on u8500 SoCs
     after fw_devlink stopped checking parent nodes in
     of_link_to_phandle()

   - Remove a couple MODULE_LICENSE macros in non-modules

   - Update the maintainers file for Microchip clk drivers

   - Use 'select' instead of 'depend on' for the REGMAP config to fix
     Kconfig issues

   - Use div_u64() for portable 64-bit division in K210 clk driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: Avoid invalid function names in CLK_OF_DECLARE()
  clk: k210: remove an implicit 64-bit division
  MAINTAINERS: add missing clock driver coverage for Microchip FPGAs
  clk: HI655X: select REGMAP instead of depending on it
  kbuild, clk: remove MODULE_LICENSE in non-modules
  kbuild, clk: bcm2835: remove MODULE_LICENSE in non-modules
  clk: Mark a fwnode as initialized when using CLK_OF_DECLARE() macro

Before my changes to how multichannel reconnects work, the
primary channel was always used to do a non-binding session
setup. With my changes, that is not the case anymore.
Missed this place where channel at index 0 was forcibly
updated with the signing key.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

If cifs_get_writable_path() finds a writable file, smb2_compound_op()
must use that file's FID and not the COMPOUND_FID.

Cc: stable@vger.kernel.org
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

A while ago where the trace events had the following:

   rcu_read_lock_sched_notrace();
   rcu_dereference_sched(...);
   rcu_read_unlock_sched_notrace();

If the tracepoint is enabled, it could trigger RCU issues if called in
the wrong place. And this warning was only triggered if lockdep was
enabled. If the tracepoint was never enabled with lockdep, the bug would
not be caught. To handle this, the above sequence was done when lockdep
was enabled regardless if the tracepoint was enabled or not (although the
always enabled code really didn't do anything, it would still trigger a
warning).

But a lot has changed since that lockdep code was added. One is, that
sequence no longer triggers any warning. Another is, the tracepoint when
enabled doesn't even do that sequence anymore.

The main check we care about today is whether RCU is "watching" or not.
So if lockdep is enabled, always check if rcu_is_watching() which will
trigger a warning if it is not (tracepoints require RCU to be watching).

Note, that old sequence did add a bit of overhead when lockdep was enabled,
and with the latest kernel updates, would cause the system to slow down
enough to trigger kernel "stalled" warnings.

Link: http://lore.kernel.org/lkml/20140806181801.GA4605@redhat.com
Link: http://lore.kernel.org/lkml/20140807175204.C257CAC5@viggo.jf.intel.com
Link: https://lore.kernel.org/lkml/20230307184645.521db5c9@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20230310172856.77406446@gandalf.local.home



Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Fixes: e6753f23 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull documentation fixes from Jonathan Corbet:
 "A handful of fixes and minor documentation updates"

* tag 'docs-6.3-fixes' of git://git.lwn.net/linux:
  docs: vfio: fix header path
  docs: process: typo fix
  docs/mm: hugetlbfs_reserv: fix a reference to a file that doesn't exist
  docs/mm: Physical Memory: fix a reference to a file that doesn't exist
  docs: rebasing-and-merging: Drop wrong statement about git
  docs: programming-language: add Rust programming language section
  docs: programming-language: remove mention of the Intel compiler
  docs: Correct missing "d_" prefix for dentry_operations member d_weak_revalidate
  sched/doc: supplement CPU capacity with RISC-V

The text points to a different header file, fix by changing
the path to "uapi".

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230310095857.985814-1-jiri@resnulli.us


Signed-off-by: Jonathan Corbet <corbet@lwn.net>