Reapply and regenerate all local patches to upstream zlib 1.2.11

Explicitly specify 9 as the minimum windowBits value (representing a
512-byte window) during compression in net/websockets even when 8
(representing 256) is received. This was previously silently done during
compression. Because of how zlib's deflate is implemented, when
windowBits is 9, it will produce a stream that can be decompressed with
a 250-byte or larger window.

Changes in 1.2.9 (31 Dec 2016)
- Fix contrib/minizip to permit unzipping with desktop API [Zouzou]
- Improve contrib/blast to return unused bytes
- Assure that gzoffset() is correct when appending
- Improve compress() and uncompress() to support large lengths
- Fix bug in test/example.c where error code not saved
- Remedy Coverity warning [Randers-Pehrson]
- Improve speed of gzprintf() in transparent mode
- Fix inflateInit2() bug when windowBits is 16 or 32
- Change DEBUG macro to ZLIB_DEBUG
- Avoid uninitialized access by gzclose_w()
- Allow building zlib outside of the source directory
- Fix bug that accepted invalid zlib header when windowBits is zero
- Fix gzseek() problem on MinGW due to buggy _lseeki64 there
- Loop on write() calls in gzwrite.c in case of non-blocking I/O
- Add --warn (-w) option to ./configure for more compiler warnings
- Reject a window size of 256 bytes if not using the zlib wrapper
- Fix bug when level 0 used with Z_HUFFMAN or Z_RLE
- Add --debug (-d) option to ./configure to define ZLIB_DEBUG
- Fix bugs in creating a very large gzip header
- Add uncompress2() function, which returns the input size used
- Assure that deflateParams() will not switch functions mid-block
- Dramatically speed up deflation for level 0 (storing)
- Add gzfread(), duplicating the interface of fread()
- Add gzfwrite(), duplicating the interface of fwrite()
- Add deflateGetDictionary() function
- Use snprintf() for later versions of Microsoft C
- Fix *Init macros to use z_ prefix when requested
- Replace as400 with os400 for OS/400 support [Monnerat]
- Add crc32_z() and adler32_z() functions with size_t lengths
- Update Visual Studio project files [AraHaan]

Changes in 1.2.10 (2 Jan 2017)
- Avoid warnings on snprintf() return value
- Fix bug in deflate_stored() for zero-length input
- Fix bug in gzwrite.c that produced corrupt gzip files
- Remove files to be installed before copying them in Makefile.in
- Add warnings when compiling with assembler code

Changes in 1.2.11 (15 Jan 2017)
- Fix deflate stored bug when pulling last block from window
- Permit immediate deflateParams changes before any deflate input

BUG=691074, 691075

Review-Url: https://codereview.chromium.org/2690623003
Cr-Original-Commit-Position: refs/heads/master@{#450585}
Cr-Mirrored-From: https://chromium.googlesource.com/chromium/src
Cr-Mirrored-Commit: 6d9a6251dfe87183075dc16cfa134e41dc4cee0d

merge the latest open source zlib into chromium external projects
Version 1.2.8 fixes a very rare bug in decompression. All users are encouraged to upgrade immediately. Version 1.2.8 also has these improvements:
- Add new inflateGetDictionary() function
- Fix bug where gzopen() immediately followed by gzclose() would write an empty file instead of an empty gzip stream.
- Fix bug in gzclose() when gzwrite() runs out of memory Version 1.2.7 has many portability improvements over 1.2.6, and has these enhancements:
- Fix bug in gzclose_w() when gzwrite() fails to allocate memory
- Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen()
- Add gzopen_w() in Windows for wide character path names
- Fix type mismatch between get_crc_table() and crc_table Version 1.2.6 has many changes over 1.2.5, including these improvements:
- gzread() can now read a file that is being written concurrently
- gzgetc() is now a macro for increased speed
- Added a 'T' option to gzopen() for transparent writing (no compression)
- Added deflatePending() to return the amount of pending output
- Allow deflateSetDictionary() and inflateSetDictionary() at any time in raw mode
- deflatePrime() can now insert bits in the middle of the stream
- ./configure now creates a configure.log file with all of the results
- Added a ./configure --solo option to compile zlib with no dependency on any libraries
- Fixed a problem with large file support macros
- Fixed a bug in contrib/puff
- Many portability improvements

BUG=610615 R=gavinp@chromium.org

Review-Url: https://codereview.chromium.org/2084863002
Cr-Original-Commit-Position: refs/heads/master@{#401538}
Cr-Mirrored-From: https://chromium.googlesource.com/chromium/src
Cr-Mirrored-Commit: ca1c569cff20aa43a42816791744d847c7d788de

Revert of Update Zlib to version 1.2.8 (patchset #10 id:220001 of https://codereview.chromium.org/1955383002/ )

Reason for revert:
Broke the Windows Debug GPU FYI builder:

https://build.chromium.org/p/chromium.gpu.fyi/builders/GPU%20Win%20Builder%20%28dbg%29/builds/41421

fx_zlib.gzlib.obj : error LNK2005: _gzopen_w already defined in zlib.gzlib.obj

initial\chrome.dll : fatal error LNK1169: one or more multiply defined symbols found

Possibly because they use shared components with a GYP build.

Original issue's description:
> Update Zlib to version 1.2.8
>
> merge the latest open source zlib into chromium external projects
>
>  Version 1.2.8 fixes a very rare bug in decompression. All users are encouraged to upgrade immediately. Version 1.2.8 also has these improvements:
>     - Add new inflateGetDictionary() function
>     - Fix bug where gzopen() immediately followed by gzclose() would write an empty file instead of an empty gzip stream.
>     - Fix bug in gzclose() when gzwrite() runs out of memory
>     Version 1.2.7 has many portability improvements over 1.2.6, and has these enhancements:
>     - Fix bug in gzclose_w() when gzwrite() fails to allocate memory
>     - Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen()
>     - Add gzopen_w() in Windows for wide character path names
>     - Fix type mismatch between get_crc_table() and crc_table
>     Version 1.2.6 has many changes over 1.2.5, including these improvements:
>     - gzread() can now read a file that is being written concurrently
>     - gzgetc() is now a macro for increased speed
>     - Added a 'T' option to gzopen() for transparent writing (no compression)
>     - Added deflatePending() to return the amount of pending output
>     - Allow deflateSetDictionary() and inflateSetDictionary() at any time in raw mode
>     - deflatePrime() can now insert bits in the middle of the stream
>     - ./configure now creates a configure.log file with all of the results
>     - Added a ./configure --solo option to compile zlib with no dependency on any libraries
>     - Fixed a problem with large file support macros
>     - Fixed a bug in contrib/puff
>     - Many portability improvements
>
> BUG=610615
> R=agl@chromium.org
> R=gavinp@chromium.org
>
> Committed: https://crrev.com/a50849ae9ba1b2fad47905db521463b3bf085883
> Cr-Commit-Position: refs/heads/master@{#400647}

TBR=agl@chromium.org,gavinp@chromium.org,khasim.mohammed@linaro.org,jiadong.zhu@linaro.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=610615

Review-Url: https://codereview.chromium.org/2079313002
Cr-Original-Commit-Position: refs/heads/master@{#400670}
Cr-Mirrored-From: https://chromium.googlesource.com/chromium/src
Cr-Mirrored-Commit: 43770253ccc0425c4edde966e56b3e68955cc4d3

merge the latest open source zlib into chromium external projects

 Version 1.2.8 fixes a very rare bug in decompression. All users are encouraged to upgrade immediately. Version 1.2.8 also has these improvements:
    - Add new inflateGetDictionary() function
    - Fix bug where gzopen() immediately followed by gzclose() would write an empty file instead of an empty gzip stream.
    - Fix bug in gzclose() when gzwrite() runs out of memory
    Version 1.2.7 has many portability improvements over 1.2.6, and has these enhancements:
    - Fix bug in gzclose_w() when gzwrite() fails to allocate memory
    - Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen()
    - Add gzopen_w() in Windows for wide character path names
    - Fix type mismatch between get_crc_table() and crc_table
    Version 1.2.6 has many changes over 1.2.5, including these improvements:
    - gzread() can now read a file that is being written concurrently
    - gzgetc() is now a macro for increased speed
    - Added a 'T' option to gzopen() for transparent writing (no compression)
    - Added deflatePending() to return the amount of pending output
    - Allow deflateSetDictionary() and inflateSetDictionary() at any time in raw mode
    - deflatePrime() can now insert bits in the middle of the stream
    - ./configure now creates a configure.log file with all of the results
    - Added a ./configure --solo option to compile zlib with no dependency on any libraries
    - Fixed a problem with large file support macros
    - Fixed a bug in contrib/puff
    - Many portability improvements

BUG=610615
R=agl@chromium.org
R=gavinp@chromium.org

Review-Url: https://codereview.chromium.org/1955383002
Cr-Original-Commit-Position: refs/heads/master@{#400647}
Cr-Mirrored-From: https://chromium.googlesource.com/chromium/src
Cr-Mirrored-Commit: a50849ae9ba1b2fad47905db521463b3bf085883

You may think that https://codereview.chromium.org/8806004 , back in
2011, did this. However, that's not correct. That update only patched files which
were present in both our old, customized checkout and zlib 1.2.5.

In zlib 1.2.5, gzio.c was replaced with gzclose.c, gzguts.h, gzlib.c, gzread.c
and gzwrite.c. We did not add those files. We just used the gzio.c from 1.2.3
with our custom patches from Gears, together with the rest of 1.2.5.

This unholy chimera worked until I went ahead and tried to fix the broken
mangling for 64 bit API symbols. See
https://codereview.chromium.org/13473020/ . This uncovered the lack of
gzread64, which was, after that fix, referenced by libxml. Since gzio.c from
1.2.3 doesn't have gzread64, this was something of a problem. I'm thus
finishing the update.

R=agl@chromium.org,rsleevi@chromium.org,brettw@chromium.org,bradchen@chromium.org
BUG=None

Review URL: https://chromiumcodereview.appspot.com/13564004

Cr-Mirrored-From: https://chromium.googlesource.com/chromium/src
Cr-Mirrored-Commit: 17f706d599cfb296c633a12bc32f7bbf5633e6d9