Select Git revision
Search by author
- Any Author
- authors
-
72162444 72162444 gaochangning
-
Aakash Dave aakash.dave
-
Aaron Kim akim
-
Aaron Kloc akloc
-
Aaron Lan aaron.lan
-
Aaron Nabil aaronna
-
Aaron Pohle aaron.pohle
-
Abbott Chung chung.abbott
-
Abdallah Omar abdallah_omar
-
Abdessamii Chalbi abdessamii.chalbi
-
Abdul Hussain Sirajudeen abdul.hussain
-
Abdullah Alghamdi a.alghamdi
-
Abdullah Elmarghany abdullah_elmarghany
-
Abel Fang abel_fang
-
Abel Vesa
abel.vesa
-
Abhijeet Badurkar abhijeet.badurkar
-
Abhijit Adsule adsule
-
Abhijit Murthy abhijit
-
Abhi Khanal akhanal
-
Abhilash Sahoo abhilashsahoo
- Jan 23, 2025
-
-
Suraj Sonawane authored
commit f10593ad upstream. Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5838 __mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912 sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407 In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is called before releasing the open_rel_lock mutex. The kref_put() call may decrement the reference count of sfp to zero, triggering its cleanup through sg_remove_sfp(). This cleanup includes scheduling deferred work via sg_remove_sfp_usercontext(), which ultimately frees sfp. After kref_put(), sg_release() continues to unlock open_rel_lock and may reference sfp or sdp. If sfp has already been freed, this results in a slab-use-after-free error. Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the open_rel_lock mutex. This ensures: - No references to sfp or sdp occur after the reference count is decremented. - Cleanup functions such as sg_remove_sfp() and sg_remove_sfp_usercontext() can safely execute without impacting the mutex handling in sg_release(). The fix has been tested and validated by syzbot. This patch closes the bug reported at the following syzkaller link and ensures proper sequencing of resource cleanup and mutex operations, eliminating the risk of use-after-free errors in sg_release(). Reported-by:
<syzbot+7efb5850a17ba6ce098b@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=7efb5850a17ba6ce098b Tested-by:
Suraj Sonawane <surajsonawane0215@gmail.com> Link: https://lore.kernel.org/r/20241120125944.88095-1-surajsonawane0215@gmail.com Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Alva Lan <alvalan9@foxmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhu Yanjun authored
commit ea4c990f upstream. When the qp is in error state, the status of WQEs in the queue should be set to error. Or else the following will appear. [ 920.617269] WARNING: CPU: 1 PID: 21 at drivers/infiniband/sw/rxe/rxe_comp.c:756 rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.617744] Modules linked in: rnbd_client(O) rtrs_client(O) rtrs_core(O) rdma_ucm rdma_cm iw_cm ib_cm crc32_generic rdma_rxe ip6_udp_tunnel udp_tunnel ib_uverbs ib_core loop brd null_blk ipv6 [ 920.618516] CPU: 1 PID: 21 Comm: ksoftirqd/1 Tainted: G O 6.1.113-storage+ #65 [ 920.618986] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 920.619396] RIP: 0010:rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.619658] Code: 0f b6 84 24 3a 02 00 00 41 89 84 24 44 04 00 00 e9 2a f7 ff ff 39 ca bb 03 00 00 00 b8 0e 00 00 00 48 0f 45 d8 e9 15 f7 ff ff <0f> 0b e9 cb f8 ff ff 41 bf f5 ff ff ff e9 08 f8 ff ff 49 8d bc 24 [ 920.620482] RSP: 0018:ffff97b7c00bbc38 EFLAGS: 00010246 [ 920.620817] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000008 [ 920.621183] RDX: ffff960dc396ebc0 RSI: 0000000000005400 RDI: ffff960dc4e2fbac [ 920.621548] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffac406450 [ 920.621884] R10: ffffffffac4060c0 R11: 0000000000000001 R12: ffff960dc4e2f800 [ 920.622254] R13: ffff960dc4e2f928 R14: ffff97b7c029c580 R15: 0000000000000000 [ 920.622609] FS: 0000000000000000(0000) GS:ffff960ef7d00000(0000) knlGS:0000000000000000 [ 920.622979] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 920.623245] CR2: 00007fa056965e90 CR3: 00000001107f1000 CR4: 00000000000006e0 [ 920.623680] Call Trace: [ 920.623815] <TASK> [ 920.623933] ? __warn+0x79/0xc0 [ 920.624116] ? rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.624356] ? report_bug+0xfb/0x150 [ 920.624594] ? handle_bug+0x3c/0x60 [ 920.624796] ? exc_invalid_op+0x14/0x70 [ 920.624976] ? asm_exc_invalid_op+0x16/0x20 [ 920.625203] ? rxe_completer+0x989/0xcc0 [rdma_rxe] [ 920.625474] ? rxe_completer+0x329/0xcc0 [rdma_rxe] [ 920.625749] rxe_do_task+0x80/0x110 [rdma_rxe] [ 920.626037] rxe_requester+0x625/0xde0 [rdma_rxe] [ 920.626310] ? rxe_cq_post+0xe2/0x180 [rdma_rxe] [ 920.626583] ? do_complete+0x18d/0x220 [rdma_rxe] [ 920.626812] ? rxe_completer+0x1a3/0xcc0 [rdma_rxe] [ 920.627050] rxe_do_task+0x80/0x110 [rdma_rxe] [ 920.627285] tasklet_action_common.constprop.0+0xa4/0x120 [ 920.627522] handle_softirqs+0xc2/0x250 [ 920.627728] ? sort_range+0x20/0x20 [ 920.627942] run_ksoftirqd+0x1f/0x30 [ 920.628158] smpboot_thread_fn+0xc7/0x1b0 [ 920.628334] kthread+0xd6/0x100 [ 920.628504] ? kthread_complete_and_exit+0x20/0x20 [ 920.628709] ret_from_fork+0x1f/0x30 [ 920.628892] </TASK> Fixes: ae720bdb ("RDMA/rxe: Generate error completion for error requester QP state") Signed-off-by:
Zhu Yanjun <yanjun.zhu@linux.dev> Link: https://patch.msgid.link/20241025152036.121417-1-yanjun.zhu@linux.dev Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Bin Lan <lanbincn@qq.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit c807ab3a which is commit 73dae652 upstream. The original patch 73dae652 (drm/amdgpu: rework resume handling for display (v2)), was only targeted at kernels 6.11 and newer. It did not apply cleanly to 6.12 so I backported it and it backport landed as 99a02eab ("drm/amdgpu: rework resume handling for display (v2)"), however there was a bug in the backport that was subsequently fixed in 063d380c ("drm/amdgpu: fix backport of commit 73dae652"). None of this was intended for kernels older than 6.11, however the original backport eventually landed in 6.6, 6.1, and 5.15. Please revert the change from kernels 6.6, 6.1, and 5.15. Link: https://lore.kernel.org/r/BL1PR12MB5144D5363FCE6F2FD3502534F7E72@BL1PR12MB5144.namprd12.prod.outlook.com Link: https://lore.kernel.org/r/BL1PR12MB51449ADCFBF2314431F8BCFDF7132@BL1PR12MB5144.namprd12.prod.outlook.com Reported-by:
Salvatore Bonaccorso <carnil@debian.org> Reported-by:
Christian König <christian.koenig@amd.com> Reported-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Yu Kuai authored
commit 3802f73b upstream. blk_mq_clear_flush_rq_mapping() is not called during scsi probe, by checking blk_queue_init_done(). However, QUEUE_FLAG_INIT_DONE is cleared in del_gendisk by commit aec89dc5 ("block: keep q_usage_counter in atomic mode after del_gendisk"), hence for disk like scsi, following blk_mq_destroy_queue() will not clear flush rq from tags->rqs[] as well, cause following uaf that is found by our syzkaller for v6.6: ================================================================== BUG: KASAN: slab-use-after-free in blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 Read of size 4 at addr ffff88811c969c20 by task kworker/1:2H/224909 CPU: 1 PID: 224909 Comm: kworker/1:2H Not tainted 6.6.0-ga836a5060850 #32 Workqueue: kblockd blk_mq_timeout_work Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364 print_report+0x3e/0x70 mm/kasan/report.c:475 kasan_report+0xb8/0xf0 mm/kasan/report.c:588 blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 bt_iter block/blk-mq-tag.c:288 [inline] __sbitmap_for_each_set include/linux/sbitmap.h:295 [inline] sbitmap_for_each_set include/linux/sbitmap.h:316 [inline] bt_for_each+0x455/0x790 block/blk-mq-tag.c:325 blk_mq_queue_tag_busy_iter+0x320/0x740 block/blk-mq-tag.c:534 blk_mq_timeout_work+0x1a3/0x7b0 block/blk-mq.c:1673 process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631 process_scheduled_works kernel/workqueue.c:2704 [inline] worker_thread+0x804/0xe40 kernel/workqueue.c:2785 kthread+0x346/0x450 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 942: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:374 [inline] __kasan_kmalloc mm/kasan/common.c:383 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:380 kasan_kmalloc include/linux/kasan.h:198 [inline] __do_kmalloc_node mm/slab_common.c:1007 [inline] __kmalloc_node+0x69/0x170 mm/slab_common.c:1014 kmalloc_node include/linux/slab.h:620 [inline] kzalloc_node include/linux/slab.h:732 [inline] blk_alloc_flush_queue+0x144/0x2f0 block/blk-flush.c:499 blk_mq_alloc_hctx+0x601/0x940 block/blk-mq.c:3788 blk_mq_alloc_and_init_hctx+0x27f/0x330 block/blk-mq.c:4261 blk_mq_realloc_hw_ctxs+0x488/0x5e0 block/blk-mq.c:4294 blk_mq_init_allocated_queue+0x188/0x860 block/blk-mq.c:4350 blk_mq_init_queue_data block/blk-mq.c:4166 [inline] blk_mq_init_queue+0x8d/0x100 block/blk-mq.c:4176 scsi_alloc_sdev+0x843/0xd50 drivers/scsi/scsi_scan.c:335 scsi_probe_and_add_lun+0x77c/0xde0 drivers/scsi/scsi_scan.c:1189 __scsi_scan_target+0x1fc/0x5a0 drivers/scsi/scsi_scan.c:1727 scsi_scan_channel drivers/scsi/scsi_scan.c:1815 [inline] scsi_scan_channel+0x14b/0x1e0 drivers/scsi/scsi_scan.c:1791 scsi_scan_host_selected+0x2fe/0x400 drivers/scsi/scsi_scan.c:1844 scsi_scan+0x3a0/0x3f0 drivers/scsi/scsi_sysfs.c:151 store_scan+0x2a/0x60 drivers/scsi/scsi_sysfs.c:191 dev_attr_store+0x5c/0x90 drivers/base/core.c:2388 sysfs_kf_write+0x11c/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x3fc/0x610 fs/kernfs/file.c:338 call_write_iter include/linux/fs.h:2083 [inline] new_sync_write+0x1b4/0x2d0 fs/read_write.c:493 vfs_write+0x76c/0xb00 fs/read_write.c:586 ksys_write+0x127/0x250 fs/read_write.c:639 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x78/0xe2 Freed by task 244687: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12a/0x1b0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1815 [inline] slab_free_freelist_hook mm/slub.c:1841 [inline] slab_free mm/slub.c:3807 [inline] __kmem_cache_free+0xe4/0x520 mm/slub.c:3820 blk_free_flush_queue+0x40/0x60 block/blk-flush.c:520 blk_mq_hw_sysfs_release+0x4a/0x170 block/blk-mq-sysfs.c:37 kobject_cleanup+0x136/0x410 lib/kobject.c:689 kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x119/0x140 lib/kobject.c:737 blk_mq_release+0x24f/0x3f0 block/blk-mq.c:4144 blk_free_queue block/blk-core.c:298 [inline] blk_put_queue+0xe2/0x180 block/blk-core.c:314 blkg_free_workfn+0x376/0x6e0 block/blk-cgroup.c:144 process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631 process_scheduled_works kernel/workqueue.c:2704 [inline] worker_thread+0x804/0xe40 kernel/workqueue.c:2785 kthread+0x346/0x450 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293 Other than blk_mq_clear_flush_rq_mapping(), the flag is only used in blk_register_queue() from initialization path, hence it's safe not to clear the flag in del_gendisk. And since QUEUE_FLAG_REGISTERED already make sure that queue should only be registered once, there is no need to test the flag as well. Fixes: 6cfeadbf ("blk-mq: don't clear flush_rq from tags->rqs[]") Depends-on: commit aec89dc5 ("block: keep q_usage_counter in atomic mode after del_gendisk") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20241104110005.1412161-1-yukuai1@huaweicloud.com Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
BRUNO VERNAY <bruno.vernay@se.com> Signed-off-by:
Hugo SIMELIERE <hsimeliere.opensource@witekio.com> Signed-off-by:
-
Vitaly Prosyak authored
commit b61badd2 upstream. [ +0.000021] BUG: KASAN: slab-use-after-free in drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000027] Read of size 8 at addr ffff8881b8605f88 by task amd_pci_unplug/2147 [ +0.000023] CPU: 6 PID: 2147 Comm: amd_pci_unplug Not tainted 6.10.0+ #1 [ +0.000016] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000016] Call Trace: [ +0.000008] <TASK> [ +0.000009] dump_stack_lvl+0x76/0xa0 [ +0.000017] print_report+0xce/0x5f0 [ +0.000017] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000019] ? srso_return_thunk+0x5/0x5f [ +0.000015] ? kasan_complete_mode_report_info+0x72/0x200 [ +0.000016] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000019] kasan_report+0xbe/0x110 [ +0.000015] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000023] __asan_report_load8_noabort+0x14/0x30 [ +0.000014] drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000020] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? __kasan_check_write+0x14/0x30 [ +0.000016] ? __pfx_drm_sched_entity_flush+0x10/0x10 [gpu_sched] [ +0.000020] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? __kasan_check_write+0x14/0x30 [ +0.000013] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? enable_work+0x124/0x220 [ +0.000015] ? __pfx_enable_work+0x10/0x10 [ +0.000013] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? free_large_kmalloc+0x85/0xf0 [ +0.000016] drm_sched_entity_destroy+0x18/0x30 [gpu_sched] [ +0.000020] amdgpu_vce_sw_fini+0x55/0x170 [amdgpu] [ +0.000735] ? __kasan_check_read+0x11/0x20 [ +0.000016] vce_v4_0_sw_fini+0x80/0x110 [amdgpu] [ +0.000726] amdgpu_device_fini_sw+0x331/0xfc0 [amdgpu] [ +0.000679] ? mutex_unlock+0x80/0xe0 [ +0.000017] ? __pfx_amdgpu_device_fini_sw+0x10/0x10 [amdgpu] [ +0.000662] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? __kasan_check_write+0x14/0x30 [ +0.000013] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? mutex_unlock+0x80/0xe0 [ +0.000016] amdgpu_driver_release_kms+0x16/0x80 [amdgpu] [ +0.000663] drm_minor_release+0xc9/0x140 [drm] [ +0.000081] drm_release+0x1fd/0x390 [drm] [ +0.000082] __fput+0x36c/0xad0 [ +0.000018] __fput_sync+0x3c/0x50 [ +0.000014] __x64_sys_close+0x7d/0xe0 [ +0.000014] x64_sys_call+0x1bc6/0x2680 [ +0.000014] do_syscall_64+0x70/0x130 [ +0.000014] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? irqentry_exit_to_user_mode+0x60/0x190 [ +0.000015] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? irqentry_exit+0x43/0x50 [ +0.000012] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? exc_page_fault+0x7c/0x110 [ +0.000015] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000014] RIP: 0033:0x7ffff7b14f67 [ +0.000013] Code: ff e8 0d 16 02 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 73 ba f7 ff [ +0.000026] RSP: 002b:00007fffffffe378 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ +0.000019] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffff7b14f67 [ +0.000014] RDX: 0000000000000000 RSI: 00007ffff7f6f47a RDI: 0000000000000003 [ +0.000014] RBP: 00007fffffffe3a0 R08: 0000555555569890 R09: 0000000000000000 [ +0.000014] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffffffe5c8 [ +0.000013] R13: 00005555555552a9 R14: 0000555555557d48 R15: 00007ffff7ffd040 [ +0.000020] </TASK> [ +0.000016] Allocated by task 383 on cpu 7 at 26.880319s: [ +0.000014] kasan_save_stack+0x28/0x60 [ +0.000008] kasan_save_track+0x18/0x70 [ +0.000007] kasan_save_alloc_info+0x38/0x60 [ +0.000007] __kasan_kmalloc+0xc1/0xd0 [ +0.000007] kmalloc_trace_noprof+0x180/0x380 [ +0.000007] drm_sched_init+0x411/0xec0 [gpu_sched] [ +0.000012] amdgpu_device_init+0x695f/0xa610 [amdgpu] [ +0.000658] amdgpu_driver_load_kms+0x1a/0x120 [amdgpu] [ +0.000662] amdgpu_pci_probe+0x361/0xf30 [amdgpu] [ +0.000651] local_pci_probe+0xe7/0x1b0 [ +0.000009] pci_device_probe+0x248/0x890 [ +0.000008] really_probe+0x1fd/0x950 [ +0.000008] __driver_probe_device+0x307/0x410 [ +0.000007] driver_probe_device+0x4e/0x150 [ +0.000007] __driver_attach+0x223/0x510 [ +0.000006] bus_for_each_dev+0x102/0x1a0 [ +0.000007] driver_attach+0x3d/0x60 [ +0.000006] bus_add_driver+0x2ac/0x5f0 [ +0.000006] driver_register+0x13d/0x490 [ +0.000008] __pci_register_driver+0x1ee/0x2b0 [ +0.000007] llc_sap_close+0xb0/0x160 [llc] [ +0.000009] do_one_initcall+0x9c/0x3e0 [ +0.000008] do_init_module+0x241/0x760 [ +0.000008] load_module+0x51ac/0x6c30 [ +0.000006] __do_sys_init_module+0x234/0x270 [ +0.000007] __x64_sys_init_module+0x73/0xc0 [ +0.000006] x64_sys_call+0xe3/0x2680 [ +0.000006] do_syscall_64+0x70/0x130 [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000015] Freed by task 2147 on cpu 6 at 160.507651s: [ +0.000013] kasan_save_stack+0x28/0x60 [ +0.000007] kasan_save_track+0x18/0x70 [ +0.000007] kasan_save_free_info+0x3b/0x60 [ +0.000007] poison_slab_object+0x115/0x1c0 [ +0.000007] __kasan_slab_free+0x34/0x60 [ +0.000007] kfree+0xfa/0x2f0 [ +0.000007] drm_sched_fini+0x19d/0x410 [gpu_sched] [ +0.000012] amdgpu_fence_driver_sw_fini+0xc4/0x2f0 [amdgpu] [ +0.000662] amdgpu_device_fini_sw+0x77/0xfc0 [amdgpu] [ +0.000653] amdgpu_driver_release_kms+0x16/0x80 [amdgpu] [ +0.000655] drm_minor_release+0xc9/0x140 [drm] [ +0.000071] drm_release+0x1fd/0x390 [drm] [ +0.000071] __fput+0x36c/0xad0 [ +0.000008] __fput_sync+0x3c/0x50 [ +0.000007] __x64_sys_close+0x7d/0xe0 [ +0.000007] x64_sys_call+0x1bc6/0x2680 [ +0.000007] do_syscall_64+0x70/0x130 [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000014] The buggy address belongs to the object at ffff8881b8605f80 which belongs to the cache kmalloc-64 of size 64 [ +0.000020] The buggy address is located 8 bytes inside of freed 64-byte region [ffff8881b8605f80, ffff8881b8605fc0) [ +0.000028] The buggy address belongs to the physical page: [ +0.000011] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1b8605 [ +0.000008] anon flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ +0.000007] page_type: 0xffffefff(slab) [ +0.000009] raw: 0017ffffc0000000 ffff8881000428c0 0000000000000000 dead000000000001 [ +0.000006] raw: 0000000000000000 0000000000200020 00000001ffffefff 0000000000000000 [ +0.000006] page dumped because: kasan: bad access detected [ +0.000012] Memory state around the buggy address: [ +0.000011] ffff8881b8605e80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ +0.000015] ffff8881b8605f00: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ +0.000015] >ffff8881b8605f80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ +0.000013] ^ [ +0.000011] ffff8881b8606000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc [ +0.000014] ffff8881b8606080: fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb fb [ +0.000013] ================================================================== The issue reproduced on VG20 during the IGT pci_unplug test. The root cause of the issue is that the function drm_sched_fini is called before drm_sched_entity_kill. In drm_sched_fini, the drm_sched_rq structure is freed, but this structure is later accessed by each entity within the run queue, leading to invalid memory access. To resolve this, the order of cleanup calls is updated: Before: amdgpu_fence_driver_sw_fini amdgpu_device_ip_fini After: amdgpu_device_ip_fini amdgpu_fence_driver_sw_fini This updated order ensures that all entities in the IPs are cleaned up first, followed by proper cleanup of the schedulers. Additional Investigation: During debugging, another issue was identified in the amdgpu_vce_sw_fini function. The vce.vcpu_bo buffer must be freed only as the final step in the cleanup process to prevent any premature access during earlier cleanup stages. v2: Using Christian suggestion call drm_sched_entity_destroy before drm_sched_fini. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by:
-
Srinivasan Shanmugam authored
commit 63de35a8 upstream. An issue was identified in the dcn21_link_encoder_create function where an out-of-bounds access could occur when the hpd_source index was used to reference the link_enc_hpd_regs array. This array has a fixed size and the index was not being checked against the array's bounds before accessing it. This fix adds a conditional check to ensure that the hpd_source index is within the valid range of the link_enc_hpd_regs array. If the index is out of bounds, the function now returns NULL to prevent undefined behavior. References: [ 65.920507] ------------[ cut here ]------------ [ 65.920510] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn21/dcn21_resource.c:1312:29 [ 65.920519] index 7 is out of range for type 'dcn10_link_enc_hpd_registers [5]' [ 65.920523] CPU: 3 PID: 1178 Comm: modprobe Tainted: G OE 6.8.0-cleanershaderfeatureresetasdntipmi200nv2132 #13 [ 65.920525] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS WMJ0429N_Weekly_20_04_2 04/29/2020 [ 65.920527] Call Trace: [ 65.920529] <TASK> [ 65.920532] dump_stack_lvl+0x48/0x70 [ 65.920541] dump_stack+0x10/0x20 [ 65.920543] __ubsan_handle_out_of_bounds+0xa2/0xe0 [ 65.920549] dcn21_link_encoder_create+0xd9/0x140 [amdgpu] [ 65.921009] link_create+0x6d3/0xed0 [amdgpu] [ 65.921355] create_links+0x18a/0x4e0 [amdgpu] [ 65.921679] dc_create+0x360/0x720 [amdgpu] [ 65.921999] ? dmi_matches+0xa0/0x220 [ 65.922004] amdgpu_dm_init+0x2b6/0x2c90 [amdgpu] [ 65.922342] ? console_unlock+0x77/0x120 [ 65.922348] ? dev_printk_emit+0x86/0xb0 [ 65.922354] dm_hw_init+0x15/0x40 [amdgpu] [ 65.922686] amdgpu_device_init+0x26a8/0x33a0 [amdgpu] [ 65.922921] amdgpu_driver_load_kms+0x1b/0xa0 [amdgpu] [ 65.923087] amdgpu_pci_probe+0x1b7/0x630 [amdgpu] [ 65.923087] local_pci_probe+0x4b/0xb0 [ 65.923087] pci_device_probe+0xc8/0x280 [ 65.923087] really_probe+0x187/0x300 [ 65.923087] __driver_probe_device+0x85/0x130 [ 65.923087] driver_probe_device+0x24/0x110 [ 65.923087] __driver_attach+0xac/0x1d0 [ 65.923087] ? __pfx___driver_attach+0x10/0x10 [ 65.923087] bus_for_each_dev+0x7d/0xd0 [ 65.923087] driver_attach+0x1e/0x30 [ 65.923087] bus_add_driver+0xf2/0x200 [ 65.923087] driver_register+0x64/0x130 [ 65.923087] ? __pfx_amdgpu_init+0x10/0x10 [amdgpu] [ 65.923087] __pci_register_driver+0x61/0x70 [ 65.923087] amdgpu_init+0x7d/0xff0 [amdgpu] [ 65.923087] do_one_initcall+0x49/0x310 [ 65.923087] ? kmalloc_trace+0x136/0x360 [ 65.923087] do_init_module+0x6a/0x270 [ 65.923087] load_module+0x1fce/0x23a0 [ 65.923087] init_module_from_file+0x9c/0xe0 [ 65.923087] ? init_module_from_file+0x9c/0xe0 [ 65.923087] idempotent_init_module+0x179/0x230 [ 65.923087] __x64_sys_finit_module+0x5d/0xa0 [ 65.923087] do_syscall_64+0x76/0x120 [ 65.923087] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 65.923087] RIP: 0033:0x7f2d80f1e88d [ 65.923087] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [ 65.923087] RSP: 002b:00007ffc7bc1aa78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 65.923087] RAX: ffffffffffffffda RBX: 0000564c9c1db130 RCX: 00007f2d80f1e88d [ 65.923087] RDX: 0000000000000000 RSI: 0000564c9c1e5480 RDI: 000000000000000f [ 65.923087] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000002 [ 65.923087] R10: 000000000000000f R11: 0000000000000246 R12: 0000564c9c1e5480 [ 65.923087] R13: 0000564c9c1db260 R14: 0000000000000000 R15: 0000564c9c1e54b0 [ 65.923087] </TASK> [ 65.923927] ---[ end trace ]--- Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Roman Li <roman.li@amd.com> Signed-off-by:
-
Javier Carrasco authored
commit 38724591 upstream. The 'data' local struct is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. Cc: stable@vger.kernel.org Fixes: 4e130dc7 ("iio: adc: rockchip_saradc: Add support iio buffers") Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-4-0cb6e98d895c@gmail.com Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
JeanBaptiste Maneyrol authored
commit 65a60a59 upstream. Currently suspending while sensors are one will result in timestamping continuing without gap at resume. It can work with monotonic clock but not with other clocks. Fix that by resetting timestamping. Fixes: ec74ae9f ("iio: imu: inv_icm42600: add accurate timestamping") Cc: stable@vger.kernel.org Signed-off-by:
Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20241113-inv_icm42600-fix-timestamps-after-suspend-v1-1-dfc77c394173@tdk.com Signed-off-by:
-
JeanBaptiste Maneyrol authored
commit c0f866de upstream. Burst write with SPI is not working for all icm42600 chips. It was only used for setting user offsets with regmap_bulk_write. Add specific SPI regmap config for using only single write with SPI. Fixes: 9f9ff91b ("iio: imu: inv_icm42600: add SPI driver for inv_icm42600 driver") Cc: stable@vger.kernel.org Signed-off-by:
-
Terry Tritton authored
This reverts commit f858b0fa which is commit 7246a452 upstream. This patch causes a regression in cuttlefish/crossvm boot on arm64. The patch was part of a series that when applied will not cause a regression but this patch was backported to the 6.1 branch by itself. The other patches do not apply cleanly to the 6.1 branch. Signed-off-by:
Terry Tritton <terry.tritton@linaro.org> Signed-off-by:
-
Ville Syrjälä authored
commit 1a5401ec upstream. Mesa changed its clear color alignment from 4k to 64 bytes without informing the kernel side about the change. This is now likely to cause framebuffer creation to fail. The only thing we do with the clear color buffer in i915 is: 1. map a single page 2. read out bytes 16-23 from said page 3. unmap the page So the only requirement we really have is that those 8 bytes are all contained within one page. Thus we can deal with the Mesa regression by reducing the alignment requiment from 4k to the same 64 bytes in the kernel. We could even go as low as 32 bytes, but IIRC 64 bytes is the hardware requirement on the 3D engine side so matching that seems sensible. Note that the Mesa alignment chages were partially undone so the regression itself was already fixed on userspace side. Cc: stable@vger.kernel.org Cc: Sagar Ghuge <sagar.ghuge@intel.com> Cc: Nanley Chery <nanley.g.chery@intel.com> Reported-by:
Xi Ruoyao <xry111@xry111.site> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13057 Closes: https://lore.kernel.org/all/45a5bba8de009347262d86a4acb27169d9ae0d9f.camel@xry111.site/ Link: https://gitlab.freedesktop.org/mesa/mesa/-/commit/17f97a69c13832a6c1b0b3aad45b06f07d4b852f Link: https://gitlab.freedesktop.org/mesa/mesa/-/commit/888f63cf1baf34bc95e847a30a041dc7798edddb Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-2-ville.syrjala@linux.intel.com Tested-by:
José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit ed3a892e) Signed-off-by:
Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by:
-
Koichiro Den authored
commit 2f8dea16 upstream. Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to CPUHP_ONLINE: Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set to 1 throughout. However, during a CPU unplug operation, the tick and the clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online state, for instance CFS incorrectly assumes that the hrtick is already active, and the chance of the clockevent device to transition to oneshot mode is also lost forever for the CPU, unless it goes back to a lower state than CPUHP_HRTIMERS_PREPARE once. This round-trip reveals another issue; cpu_base.online is not set to 1 after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer(). Aside of that, the bulk of the per CPU state is not reset either, which means there are dangling pointers in the worst case. Address this by adding a corresponding startup() callback, which resets the stale per CPU state and sets the online flag. [ tglx: Make the new callback unconditionally available, remove the online modification in the prepare() callback and clear the remaining state in the starting callback instead of the prepare callback ] Fixes: 5c0930cc ("hrtimers: Push pending hrtimers away from outgoing CPU earlier") Signed-off-by:
Koichiro Den <koichiro.den@canonical.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241220134421.3809834-1-koichiro.den@canonical.com Signed-off-by:
-
Tomas Krcka authored
commit 35cb2c6c upstream. The following call-chain leads to enabling interrupts in a nested interrupt disabled section: irq_set_vcpu_affinity() irq_get_desc_lock() raw_spin_lock_irqsave() <--- Disable interrupts its_irq_set_vcpu_affinity() guard(raw_spinlock_irq) <--- Enables interrupts when leaving the guard() irq_put_desc_unlock() <--- Warns because interrupts are enabled This was broken in commit b97e8a2f, which replaced the original raw_spin_[un]lock() pair with guard(raw_spinlock_irq). Fix the issue by using guard(raw_spinlock). [ tglx: Massaged change log ] Fixes: b97e8a2f ("irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()") Signed-off-by:
Tomas Krcka <krckatom@amazon.de> Signed-off-by:
Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241230150825.62894-1-krckatom@amazon.de Signed-off-by:
-
Yogesh Lal authored
commit 0d62a49a upstream. When a CPU attempts to enter low power mode, it disables the redistributor and Group 1 interrupts and reinitializes the system registers upon wakeup. If the transition into low power mode fails, then the CPU_PM framework invokes the PM notifier callback with CPU_PM_ENTER_FAILED to allow the drivers to undo the state changes. The GIC V3 driver ignores CPU_PM_ENTER_FAILED, which leaves the GIC in disabled state. Handle CPU_PM_ENTER_FAILED in the same way as CPU_PM_EXIT to restore normal operation. [ tglx: Massage change log, add Fixes tag ] Fixes: 3708d52f ("irqchip: gic-v3: Implement CPU PM notifier") Signed-off-by:
Yogesh Lal <quic_ylal@quicinc.com> Signed-off-by:
-
Joe Hattori authored
commit 9322d191 upstream. platform_irqchip_probe() leaks a OF node when irq_init_cb() fails. Fix it by declaring par_np with the __free(device_node) cleanup construct. This bug was found by an experimental static analysis tool that I am developing. Fixes: f8410e62 ("irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros") Signed-off-by:
Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Signed-off-by:
-
Xiaolei Wang authored
commit 726efa92 upstream. Currently imx8mp_blk_ctrl_remove() will continue the for loop until an out-of-bounds exception occurs. pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : dev_pm_domain_detach+0x8/0x48 lr : imx8mp_blk_ctrl_shutdown+0x58/0x90 sp : ffffffc084f8bbf0 x29: ffffffc084f8bbf0 x28: ffffff80daf32ac0 x27: 0000000000000000 x26: ffffffc081658d78 x25: 0000000000000001 x24: ffffffc08201b028 x23: ffffff80d0db9490 x22: ffffffc082340a78 x21: 00000000000005b0 x20: ffffff80d19bc180 x19: 000000000000000a x18: ffffffffffffffff x17: ffffffc080a39e08 x16: ffffffc080a39c98 x15: 4f435f464f006c72 x14: 0000000000000004 x13: ffffff80d0172110 x12: 0000000000000000 x11: ffffff80d0537740 x10: ffffff80d05376c0 x9 : ffffffc0808ed2d8 x8 : ffffffc084f8bab0 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffffff80d19b9420 x4 : fffffffe03466e60 x3 : 0000000080800077 x2 : 0000000000000000 x1 : 0000000000000001 x0 : 0000000000000000 Call trace: dev_pm_domain_detach+0x8/0x48 platform_shutdown+0x2c/0x48 device_shutdown+0x158/0x268 kernel_restart_prepare+0x40/0x58 kernel_kexec+0x58/0xe8 __do_sys_reboot+0x198/0x258 __arm64_sys_reboot+0x2c/0x40 invoke_syscall+0x5c/0x138 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0xc8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 Code: 8128c2d0 ffffffc0 aa1e03e9 d503201f Fixes: 556f5cf9 ("soc: imx: add i.MX8MP HSIO blk-ctrl") Cc: stable@vger.kernel.org Signed-off-by:
Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250115014118.4086729-1-xiaolei.wang@windriver.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Zhongqiu Han authored
commit 02f6b0e1 upstream. The use-after-free issue occurs as follows: when the GPIO chip device file is being closed by invoking gpio_chrdev_release(), watched_lines is freed by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier chain failed due to waiting write rwsem. Additionally, one of the GPIO chip's lines is also in the release process and holds the notifier chain's read rwsem. Consequently, a race condition leads to the use-after-free of watched_lines. Here is the typical stack when issue happened: [free] gpio_chrdev_release() --> bitmap_free(cdev->watched_lines) <-- freed --> blocking_notifier_chain_unregister() --> down_write(&nh->rwsem) <-- waiting rwsem --> __down_write_common() --> rwsem_down_write_slowpath() --> schedule_preempt_disabled() --> schedule() [use] st54spi_gpio_dev_release() --> gpio_free() --> gpiod_free() --> gpiod_free_commit() --> gpiod_line_state_notify() --> blocking_notifier_call_chain() --> down_read(&nh->rwsem); <-- held rwsem --> notifier_call_chain() --> lineinfo_changed_notify() --> test_bit(xxxx, cdev->watched_lines) <-- use after free The side effect of the use-after-free issue is that a GPIO line event is being generated for userspace where it shouldn't. However, since the chrdev is being closed, userspace won't have the chance to read that event anyway. To fix the issue, call the bitmap_free() function after the unregistration of lineinfo_changed_nb notifier chain. Fixes: 51c1064e ("gpiolib: add new ioctl() for monitoring changes in line info") Signed-off-by:
Zhongqiu Han <quic_zhonhan@quicinc.com> Link: https://lore.kernel.org/r/20240505141156.2944912-1-quic_zhonhan@quicinc.com Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by:
-
Rik van Riel authored
commit cbc5dde0 upstream. Since commit 5cbcb62d ("fs/proc: fix softlockup in __read_vmcore") the number of softlockups in __read_vmcore at kdump time have gone down, but they still happen sometimes. In a memory constrained environment like the kdump image, a softlockup is not just a harmless message, but it can interfere with things like RCU freeing memory, causing the crashdump to get stuck. The second loop in __read_vmcore has a lot more opportunities for natural sleep points, like scheduling out while waiting for a data write to happen, but apparently that is not always enough. Add a cond_resched() to the second loop in __read_vmcore to (hopefully) get rid of the softlockups. Link: https://lkml.kernel.org/r/20250110102821.2a37581b@fangorn Fixes: 5cbcb62d ("fs/proc: fix softlockup in __read_vmcore") Signed-off-by:
Rik van Riel <riel@surriel.com> Reported-by:
Breno Leitao <leitao@debian.org> Cc: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Marco Nelissen authored
commit f505e6c9 upstream. On 32-bit kernels, folio_seek_hole_data() was inadvertently truncating a 64-bit value to 32 bits, leading to a possible infinite loop when writing to an xfs filesystem. Link: https://lkml.kernel.org/r/20250102190540.1356838-1-marco.nelissen@gmail.com Fixes: 54fa39ac ("iomap: use mapping_seek_hole_data") Signed-off-by:
Marco Nelissen <marco.nelissen@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Stefano Garzarella authored
commit 91751e24 upstream. Recent reports have shown how we sometimes call vsock_*_has_data() when a vsock socket has been de-assigned from a transport (see attached links), but we shouldn't. Previous commits should have solved the real problems, but we may have more in the future, so to avoid null-ptr-deref, we can return 0 (no space, no data available) but with a warning. This way the code should continue to run in a nearly consistent state and have a warning that allows us to debug future problems. Fixes: c0cfa2d8 ("vsock: add multi-transports support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/netdev/Z2K%2FI4nlHdfMRTZC@v4bel-B760M-AORUS-ELITE-AX/ Link: https://lore.kernel.org/netdev/5ca20d4c-1017-49c2-9516-f6f75fd331e9@rbox.co/ Link: https://lore.kernel.org/netdev/677f84a8.050a0220.25a300.01b3.GAE@google.com/ Co-developed-by:
Hyunwoo Kim <v4bel@theori.io> Signed-off-by:
Wongi Lee <qwerty@theori.io> Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
Luigi Leonardi <leonardi@redhat.com> Reviewed-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Stefano Garzarella authored
commit a24009bc upstream. Transport's release() and destruct() are called when de-assigning the vsock transport. These callbacks can touch some socket state like sock flags, sk_state, and peer_shutdown. Since we are reassigning the socket to a new transport during vsock_connect(), let's reset these fields to have a clean state with the new transport. Fixes: c0cfa2d8 ("vsock: add multi-transports support") Cc: stable@vger.kernel.org Signed-off-by:
-
Stefano Garzarella authored
commit df137da9 upstream. During virtio_transport_release() we can schedule a delayed work to perform the closing of the socket before destruction. The destructor is called either when the socket is really destroyed (reference counter to zero), or it can also be called when we are de-assigning the transport. In the former case, we are sure the delayed work has completed, because it holds a reference until it completes, so the destructor will definitely be called after the delayed work is finished. But in the latter case, the destructor is called by AF_VSOCK core, just after the release(), so there may still be delayed work scheduled. Refactor the code, moving the code to delete the close work already in the do_close() to a new function. Invoke it during destruction to make sure we don't leave any pending work. Fixes: c0cfa2d8 ("vsock: add multi-transports support") Cc: stable@vger.kernel.org Reported-by:
-
Stefano Garzarella authored
commit 2cb7c756 upstream. If the socket has been de-assigned or assigned to another transport, we must discard any packets received because they are not expected and would cause issues when we access vsk->transport. A possible scenario is described by Hyunwoo Kim in the attached link, where after a first connect() interrupted by a signal, and a second connect() failed, we can find `vsk->transport` at NULL, leading to a NULL pointer dereference. Fixes: c0cfa2d8 ("vsock: add multi-transports support") Cc: stable@vger.kernel.org Reported-by:
-
Heiner Kallweit authored
commit 6be7aca9 upstream. In 4.19, before the switch to linkmode bitmaps, PHY_GBIT_FEATURES included feature bits for aneg and TP/MII ports. SUPPORTED_TP | \ SUPPORTED_MII) SUPPORTED_10baseT_Full) SUPPORTED_100baseT_Full) SUPPORTED_1000baseT_Full) PHY_100BT_FEATURES | \ PHY_DEFAULT_FEATURES) PHY_1000BT_FEATURES) Referenced commit expanded PHY_GBIT_FEATURES, silently removing PHY_DEFAULT_FEATURES. The removed part can be re-added by using the new PHY_GBIT_FEATURES definition. Not clear to me is why nobody seems to have noticed this issue. I stumbled across this when checking what it takes to make phy_10_100_features_array et al private to phylib. Fixes: d0939c26 ("net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES") Cc: stable@vger.kernel.org Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/46521973-7738-4157-9f5e-0bb6f694acba@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Paolo Abeni authored
commit 218cc166 upstream. The disconnect test-case generates spurious errors: INFO: disconnect INFO: extra options: -I 3 -i /tmp/tmp.r43niviyoI 01 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 140ms) [FAIL] file received by server does not match (in, out): Unexpected revents: POLLERR/POLLNVAL(19) -rw-r--r-- 1 root root 10028676 Jan 10 10:47 /tmp/tmp.r43niviyoI.disconnect Trailing bytes are: ��\����R���!8��u2��5N% -rw------- 1 root root 9992290 Jan 10 10:47 /tmp/tmp.Os4UbnWbI1 Trailing bytes are: ��\����R���!8��u2��5N% 02 ns1 MPTCP -> ns1 (dead:beef:1::1:10001) MPTCP (duration 206ms) [ OK ] 03 ns1 MPTCP -> ns1 (dead:beef:1::1:10002) TCP (duration 31ms) [ OK ] 04 ns1 TCP -> ns1 (dead:beef:1::1:10003) MPTCP (duration 26ms) [ OK ] [FAIL] Tests of the full disconnection have failed Time: 2 seconds The root cause is actually in the user-space bits: the test program currently disconnects as soon as all the pending data has been spooled, generating an FASTCLOSE. If such option reaches the peer before the latter has reached the closed status, the msk socket will report an error to the user-space, as per protocol specification, causing the above failure. Address the issue explicitly waiting for all the relevant sockets to reach a closed status before performing the disconnect. Fixes: 05be5e27 ("selftests: mptcp: add disconnect tests") Cc: stable@vger.kernel.org Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by:
-
Paolo Abeni authored
commit 2ca06a2f upstream. mptcp_cleanup_rbuf() is responsible to send acks when the user-space reads enough data to update the receive windows significantly. It tries hard to avoid acquiring the subflow sockets locks by checking conditions similar to the ones implemented at the TCP level. To avoid too much code duplication - the MPTCP protocol can't reuse the TCP helpers as part of the relevant status is maintained into the msk socket - and multiple costly window size computation, mptcp_cleanup_rbuf uses a rough estimate for the most recently advertised window size: the MPTCP receive free space, as recorded as at last-ack time. Unfortunately the above does not allow mptcp_cleanup_rbuf() to detect a zero to non-zero win change in some corner cases, skipping the tcp_cleanup_rbuf call and leaving the peer stuck. After commit ea66758c ("tcp: allow MPTCP to update the announced window"), MPTCP has actually cheap access to the announced window value. Use it in mptcp_cleanup_rbuf() for a more accurate ack generation. Fixes: e3859603 ("mptcp: better msk receive window updates") Cc: stable@vger.kernel.org Reported-by:
-
Kairui Song authored
commit 212fe1c0 upstream. If zram_meta_alloc failed early, it frees allocated zram->table without setting it NULL. Which will potentially cause zram_meta_free to access the table if user reset an failed and uninitialized device. Link: https://lkml.kernel.org/r/20250107065446.86928-1-ryncsn@gmail.com Fixes: 74363ec6 ("zram: fix uninitialized ZRAM not releasing backing device") Signed-off-by:
Kairui Song <kasong@tencent.com> Reviewed-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Stefan Binding authored
commit de5afadd upstream. Add support for Ayaneo Portable Game System. System use 2 CS35L41 Amps with HDA, using Internal boost, with I2C Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20250109165455.645810-1-sbinding@opensource.cirrus.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Juergen Gross authored
[ Upstream commit ae02ae16 ] In order to allow serialize() to be used from noinstr code, make it __always_inline. Fixes: 0ef8047b ("x86/static-call: provide a way to do very early static-call updates") Closes: https://lore.kernel.org/oe-kbuild-all/202412181756.aJvzih2K-lkp@intel.com/ Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20241218100918.22167-1-jgross@suse.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Oleg Nesterov authored
[ Upstream commit cacd9ae4 ] As the comment above waitqueue_active() explains, it can only be used if both waker and waiter have mb()'s that pair with each other. However __pollwait() is broken in this respect. This is not pipe-specific, but let's look at pipe_poll() for example: poll_wait(...); // -> __pollwait() -> add_wait_queue() LOAD(pipe->head); LOAD(pipe->head); In theory these LOAD()'s can leak into the critical section inside add_wait_queue() and can happen before list_add(entry, wq_head), in this case pipe_poll() can race with wakeup_pipe_readers/writers which do smp_mb(); if (waitqueue_active(wq_head)) wake_up_interruptible(wq_head); There are more __pollwait()-like functions (grep init_poll_funcptr), and it seems that at least ep_ptable_queue_proc() has the same problem, so the patch adds smp_mb() into poll_wait(). Link: https://lore.kernel.org/all/20250102163320.GA17691@redhat.com/ Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/r/20250107162717.GA18922@redhat.com Signed-off-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
-
Marco Nelissen authored
[ Upstream commit c13094b8 ] on 32-bit kernels, iomap_write_delalloc_scan() was inadvertently using a 32-bit position due to folio_next_index() returning an unsigned long. This could lead to an infinite loop when writing to an xfs filesystem. Signed-off-by:
Darrick J. Wong <djwong@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit cd4a7b2e ] acpi_dev_irq_override() gets called approx. 30 times during boot (15 legacy IRQs * 2 override_table entries). Of these 30 calls at max 1 will match the non DMI checks done by acpi_dev_irq_override(). The dmi_check_system() check is by far the most expensive check done by acpi_dev_irq_override(), make this call the last check done by acpi_dev_irq_override() so that it will be called at max 1 time instead of 30 times. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/20241228165253.42584-1-hdegoede@redhat.com [ rjw: Subject edit ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit e95274df ] After previous change rshift >= 32 is no longer allowed. Modify the test to use 31, the test doesn't seem to send any traffic so the exact value shouldn't matter. Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250103182458.1213486-1-kuba@kernel.org Signed-off-by:
-
Mani Sadhasivam authored
[ Upstream commit bb985070 ] Otherwise, the default levels will override the levels set by the host controller drivers. Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20241219-ufs-qcom-suspend-fix-v3-2-63c4b95a70b9@linaro.org Reviewed-by:
-
Max Kellermann authored
[ Upstream commit e5a8b644 ] Instead of storing an opaque string, call security_secctx_to_secid() right in the "secctx" command handler and store only the numeric "secid". This eliminates an unnecessary string allocation and allows the daemon to receive errors when writing the "secctx" command instead of postponing the error to the "bind" command handler. For example, if the kernel was built without `CONFIG_SECURITY`, "bind" will return `EOPNOTSUPP`, but the daemon doesn't know why. With this patch, the "secctx" will instead return `EOPNOTSUPP` which is the right context for this error. This patch adds a boolean flag `have_secid` because I'm not sure if we can safely assume that zero is the special secid value for "not set". This appears to be true for SELinux, Smack and AppArmor, but since this attribute is not documented, I'm unable to derive a stable guarantee for that. Signed-off-by:
Max Kellermann <max.kellermann@ionos.com> Signed-off-by:
David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241209141554.638708-1-max.kellermann@ionos.com/ Link: https://lore.kernel.org/r/20241213135013.2964079-6-dhowells@redhat.com Signed-off-by:
-
David Howells authored
[ Upstream commit 973b710b ] Tell tar to ignore silly-rename files (".__afs*" and ".nfs*") when building the header archive. These occur when a file that is open is unlinked locally, but hasn't yet been closed. Such files are visible to the user via the getdents() syscall and so programs may want to do things with them. During the kernel build, such files may be made during the processing of header files and the cleanup may get deferred by fput() which may result in tar seeing these files when it reads the directory, but they may have disappeared by the time it tries to open them, causing tar to fail with an error. Further, we don't want to include them in the tarball if they still exist. With CONFIG_HEADERS_INSTALL=y, something like the following may be seen: find: './kernel/.tmp_cpio_dir/include/dt-bindings/reset/.__afs2080': No such file or directory tar: ./include/linux/greybus/.__afs3C95: File removed before we read it The find warning doesn't seem to cause a problem. Fix this by telling tar when called from in gen_kheaders.sh to exclude such files. This only affects afs and nfs; cifs uses the Windows Hidden attribute to prevent the file from being seen. Signed-off-by:
-
Zhang Kunbo authored
[ Upstream commit 2b2fc0be ] fs/file.c should include include/linux/init_task.h for declaration of init_files. This fixes the sparse warning: fs/file.c:501:21: warning: symbol 'init_files' was not declared. Should it be static? Signed-off-by:
Zhang Kunbo <zhangkunbo@huawei.com> Link: https://lore.kernel.org/r/20241217071836.2634868-1-zhangkunbo@huawei.com Signed-off-by:
-
Leo Stone authored
[ Upstream commit b905bafd ] In the syzbot reproducer, the hfs_cat_rec for the root dir has type HFS_CDR_FIL after being read with hfs_bnode_read() in hfs_super_fill(). This indicates it should be used as an hfs_cat_file, which is 102 bytes. Only the first 70 bytes of that struct are initialized, however, because the entrylength passed into hfs_bnode_read() is still the length of a directory record. This causes uninitialized values to be used later on, when the hfs_cat_rec union is treated as the larger hfs_cat_file struct. Add a check to make sure the retrieved record has the correct type for the root directory (HFS_CDR_DIR), and make sure we load the correct number of bytes for a directory record. Reported-by:
<syzbot+2db3c7526ba68f4ea776@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=2db3c7526ba68f4ea776 Tested-by:
Leo Stone <leocstone@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Lizhi Xu authored
[ Upstream commit eb09fbeb ] syzkaller reported a corrupted list in ieee802154_if_remove. [1] Remove an IEEE 802.15.4 network interface after unregister an IEEE 802.15.4 hardware device from the system. CPU0 CPU1 ==== ==== genl_family_rcv_msg_doit ieee802154_unregister_hw ieee802154_del_iface ieee802154_remove_interfaces rdev_del_virtual_intf_deprecated list_del(&sdata->list) ieee802154_if_remove list_del_rcu The net device has been unregistered, since the rcu grace period, unregistration must be run before ieee802154_if_remove. To avoid this issue, add a check for local->interfaces before deleting sdata list. [1] kernel BUG at lib/list_debug.c:58! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 6277 Comm: syz-executor157 Not tainted 6.12.0-rc6-syzkaller-00005-g557329bcecc2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__list_del_entry_valid_or_report+0xf4/0x140 lib/list_debug.c:56 Code: e8 a1 7e 00 07 90 0f 0b 48 c7 c7 e0 37 60 8c 4c 89 fe e8 8f 7e 00 07 90 0f 0b 48 c7 c7 40 38 60 8c 4c 89 fe e8 7d 7e 00 07 90 <0f> 0b 48 c7 c7 a0 38 60 8c 4c 89 fe e8 6b 7e 00 07 90 0f 0b 48 c7 RSP: 0018:ffffc9000490f3d0 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: d211eee56bb28d00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88805b278dd8 R08: ffffffff8174a12c R09: 1ffffffff2852f0d R10: dffffc0000000000 R11: fffffbfff2852f0e R12: dffffc0000000000 R13: dffffc0000000000 R14: dead000000000100 R15: ffff88805b278cc0 FS: 0000555572f94380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056262e4a3000 CR3: 0000000078496000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:124 [inline] __list_del_entry include/linux/list.h:215 [inline] list_del_rcu include/linux/rculist.h:157 [inline] ieee802154_if_remove+0x86/0x1e0 net/mac802154/iface.c:687 rdev_del_virtual_intf_deprecated net/ieee802154/rdev-ops.h:24 [inline] ieee802154_del_iface+0x2c0/0x5c0 net/ieee802154/nl-phy.c:323 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:744 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2607 ___sys_sendmsg net/socket.c:2661 [inline] __sys_sendmsg+0x292/0x380 net/socket.c:2690 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reported-and-tested-by:
<syzbot+985f827280dc3a6e7e92@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=985f827280dc3a6e7e92 Signed-off-by:
Lizhi Xu <lizhi.xu@windriver.com> Reviewed-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/20241113095129.1457225-1-lizhi.xu@windriver.com Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Luis Chamberlain authored
[ Upstream commit b579d6fd ] Ensure we propagate npwg to the target as well instead of assuming its the same logical blocks per physical block. This ensures devices with large IUs information properly propagated on the target. Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
-
