Select Git revision
Search by author
- Any Author
- authors
-
72162444 72162444 gaochangning
-
Aakash Dave aakash.dave
-
Aaron Kim akim
-
Aaron Kloc akloc
-
Aaron Lan aaron.lan
-
Aaron Nabil aaronna
-
Aaron Pohle aaron.pohle
-
Abbott Chung chung.abbott
-
Abdallah Omar abdallah_omar
-
Abdessamii Chalbi abdessamii.chalbi
-
Abdul Hussain Sirajudeen abdul.hussain
-
Abdullah Alghamdi a.alghamdi
-
Abdullah Elmarghany abdullah_elmarghany
-
Abel Fang abel_fang
-
Abhijeet Badurkar abhijeet.badurkar
-
Abhijit Adsule adsule
-
Abhijit Murthy abhijit
-
Abhi Khanal akhanal
-
Abhilash Sahoo abhilashsahoo
-
Abhimanyu Raj abhimanyu.raj
- Nov 08, 2023
-
-
Wang Hai authored
commit 3bb2a01c upstream. In kobject_get_path(), if kobj->name is changed between calls get_kobj_path_length() and fill_kobj_path() and the length becomes longer, then fill_kobj_path() will have an out-of-bounds bug. The actual current problem occurs when the ixgbe probe. In ixgbe_mii_bus_init(), if the length of netdev->dev.kobj.name length becomes longer, out-of-bounds will occur. cpu0 cpu1 ixgbe_probe register_netdev(netdev) netdev_register_kobject device_add kobject_uevent // Sending ADD events systemd-udevd // rename netdev dev_change_name device_rename kobject_rename ixgbe_mii_bus_init | mdiobus_register | __mdiobus_register | device_register | device_add | kobject_uevent | kobject_get_path | len = get_kobj_path_length // old name | path = kzalloc(len, gfp_mask); | kobj->name = name; /* name length becomes * longer */ fill_kobj_path /* kobj path length is * longer than path, * resulting in out of * bounds when filling path */ This is the kasan report: ================================================================== BUG: KASAN: slab-out-of-bounds in fill_kobj_path+0x50/0xc0 Write of size 7 at addr ff1100090573d1fd by task kworker/28:1/673 Workqueue: events work_for_cpu_fn Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_address_description.constprop.0+0x86/0x1e7 print_report+0x36/0x4f kasan_report+0xad/0x130 kasan_check_range+0x35/0x1c0 memcpy+0x39/0x60 fill_kobj_path+0x50/0xc0 kobject_get_path+0x5a/0xc0 kobject_uevent_env+0x140/0x460 device_add+0x5c7/0x910 __mdiobus_register+0x14e/0x490 ixgbe_probe.cold+0x441/0x574 [ixgbe] local_pci_probe+0x78/0xc0 work_for_cpu_fn+0x26/0x40 process_one_work+0x3b6/0x6a0 worker_thread+0x368/0x520 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30 This reproducer triggers that bug: while: do rmmod ixgbe sleep 0.5 modprobe ixgbe sleep 0.5 When calling fill_kobj_path() to fill path, if the name length of kobj becomes longer, return failure and retry. This fixes the problem. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20221220012143.52141-1-wanghai38@huawei.com Signed-off-by:
Oleksandr Tymoshenko <ovt@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jinjie Ruan authored
In linux-6.1, the related code is refactored in commit 124c49b1 ("arm64: armv8_deprecated: rework deprected instruction handling") and this issue was incidentally fixed. I have adapted the patch set to linux stable 5.10. However, 4.19 and 5.10 are too different and the patch set is hard to adapt to 4.19. This patch is to solve the problem of repeated addition of linked lists described below with few changes. How to reproduce: CONFIG_ARMV8_DEPRECATED=y, CONFIG_SWP_EMULATION=y, and CONFIG_DEBUG_LIST=y, then launch two shell executions: #!/bin/bash while [ 1 ]; do echo 1 > /proc/sys/abi/swp done or "echo 1 > /proc/sys/abi/swp" and then aunch two shell executions: #!/bin/bash while [ 1 ]; do echo 0 > /proc/sys/abi/swp done In emulation_proc_handler(), read and write operations are performed on insn->current_mode. In the concurrency scenario, mutex only protects writing insn->current_mode, and not protects the read. Suppose there are two concurrent tasks, task1 updates insn->current_mode to INSN_EMULATE in the critical section, the prev_mode of task2 is still the old data INSN_UNDEF of insn->current_mode. As a result, two tasks call update_insn_emulation_mode twice with prev_mode = INSN_UNDEF and current_mode = INSN_EMULATE, then call register_emulation_hooks twice, resulting in a list_add double problem. After applying this patch, the following list add or list del double warnings never occur. Call trace: __list_add_valid+0xd8/0xe4 register_undef_hook+0x94/0x13c update_insn_emulation_mode+0xd0/0x12c emulation_proc_handler+0xd8/0xf4 proc_sys_call_handler+0x140/0x250 proc_sys_write+0x1c/0x2c new_sync_write+0xec/0x18c vfs_write+0x214/0x2ac ksys_write+0x70/0xfc __arm64_sys_write+0x24/0x30 el0_svc_common.constprop.0+0x7c/0x1bc do_el0_svc+0x2c/0x94 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb4 el0_sync+0x160/0x180 Call trace: __list_del_entry_valid+0xac/0x110 unregister_undef_hook+0x34/0x80 update_insn_emulation_mode+0xf0/0x180 emulation_proc_handler+0x8c/0xd8 proc_sys_call_handler+0x1d8/0x208 proc_sys_write+0x14/0x20 new_sync_write+0xf0/0x190 vfs_write+0x304/0x388 ksys_write+0x6c/0x100 __arm64_sys_write+0x1c/0x28 el0_svc_common.constprop.4+0x68/0x188 do_el0_svc+0x24/0xa0 el0_svc+0x14/0x20 el0_sync_handler+0x90/0xb8 el0_sync+0x160/0x180 Fixes: af483947 ("arm64: fix oops in concurrently setting insn_emulation sysctls") Cc: stable@vger.kernel.org#4.19.x Cc: gregkh@linuxfoundation.org Signed-off-by:
Jinjie Ruan <ruanjinjie@huawei.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Lukasz Majczak authored
commit 3d887d51 upstream. As drm_dp_get_mst_branch_device_by_guid() is called from drm_dp_get_mst_branch_device_by_guid(), mstb parameter has to be checked, otherwise NULL dereference may occur in the call to the memcpy() and cause following: [12579.365869] BUG: kernel NULL pointer dereference, address: 0000000000000049 [12579.365878] #PF: supervisor read access in kernel mode [12579.365880] #PF: error_code(0x0000) - not-present page [12579.365882] PGD 0 P4D 0 [12579.365887] Oops: 0000 [#1] PREEMPT SMP NOPTI ... [12579.365895] Workqueue: events_long drm_dp_mst_up_req_work [12579.365899] RIP: 0010:memcmp+0xb/0x29 [12579.365921] Call Trace: [12579.365927] get_mst_branch_device_by_guid_helper+0x22/0x64 [12579.365930] drm_dp_mst_up_req_work+0x137/0x416 [12579.365933] process_one_work+0x1d0/0x419 [12579.365935] worker_thread+0x11a/0x289 [12579.365938] kthread+0x13e/0x14f [12579.365941] ? process_one_work+0x419/0x419 [12579.365943] ? kthread_blkcg+0x31/0x31 [12579.365946] ret_from_fork+0x1f/0x30 As get_mst_branch_device_by_guid_helper() is recursive, moving condition to the first line allow to remove a similar one for step over of NULL elements inside a loop. Fixes: 5e93b820 ("drm/dp/mst: move GUID storage from mgr, port to only mst branch") Cc: <stable@vger.kernel.org> # 4.14+ Signed-off-by:
Lukasz Majczak <lma@semihalf.com> Reviewed-by:
Radoslaw Biernacki <rad@chromium.org> Signed-off-by:
Manasi Navare <navaremanasi@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230922063410.23626-1-lma@semihalf.com Signed-off-by:
-
Nick Desaulniers authored
[ Upstream commit 790756c7 ] It looks like a section directive was using "Solaris style" to declare the section flags. Replace this with the GNU style so that Clang's integrated assembler can assemble this directive. The modified instances were identified via: $ ag \.section | grep # Link: https://ftp.gnu.org/old-gnu/Manuals/gas-2.9.1/html_chapter/as_7.html#SEC119 Link: https://github.com/ClangBuiltLinux/linux/issues/744 Link: https://bugs.llvm.org/show_bug.cgi?id=43759 Link: https://reviews.llvm.org/D69296 Acked-by:
Nicolas Pitre <nico@fluxnic.net> Reviewed-by:
Ard Biesheuvel <ardb@kernel.org> Reviewed-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Suggested-by:
Fangrui Song <maskray@google.com> Suggested-by:
Jian Cai <jiancai@google.com> Suggested-by:
Peter Smith <peter.smith@linaro.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Trond Myklebust authored
[ Upstream commit 22876f54 ] The NFS read code can trigger writeback while holding the page lock. If an error then triggers a call to nfs_write_error_remove_page(), we can deadlock. Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Thomas Gleixner authored
commit 128b0c97 upstream. David and a few others reported that on certain newer systems some legacy interrupts fail to work correctly. Debugging revealed that the BIOS of these systems leaves the legacy PIC in uninitialized state which makes the PIC detection fail and the kernel switches to a dummy implementation. Unfortunately this fallback causes quite some code to fail as it depends on checks for the number of legacy PIC interrupts or the availability of the real PIC. In theory there is no reason to use the PIC on any modern system when IO/APIC is available, but the dependencies on the related checks cannot be resolved trivially and on short notice. This needs lots of analysis and rework. The PIC detection has been added to avoid quirky checks and force selection of the dummy implementation all over the place, especially in VM guest scenarios. So it's not an option to revert the relevant commit as that would break a lot of other scenarios. One solution would be to try to initialize the PIC on detection fail and retry the detection, but that puts the burden on everything which does not have a PIC. Fortunately the ACPI/MADT table header has a flag field, which advertises in bit 0 that the system is PCAT compatible, which means it has a legacy 8259 PIC. Evaluate that bit and if set avoid the detection routine and keep the real PIC installed, which then gets initialized (for nothing) and makes the rest of the code with all the dependencies work again. Fixes: e179f691 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately") Reported-by:
David Lazar <dlazar@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003 Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 865b080e ] Second interrupt is needed only when touchscreen mode is used, so don't request it unconditionally. This removes the following annoying warning during boot: exynos-adc 14d10000.adc: error -ENXIO: IRQ index 1 not found Fixes: 2bb8ad9b ("iio: exynos-adc: add experimental touchscreen support") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20231009101412.916922-1-m.szyprowski@samsung.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Peter Zijlstra authored
commit a71ef314 upstream. Smatch is awesome. Fixes: 32671e37 ("perf: Disallow mis-matched inherited group reads") Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peng Fan authored
commit 7d6e10f5 upstream. The nregs for i.MX6UL should be 144 per fuse map, correct it. Fixes: 4aa2b480 ("nvmem: octop: Add support for imx6ul") Cc: Stable@vger.kernel.org Signed-off-by:
Peng Fan <peng.fan@nxp.com> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013124904.175782-3-srinivas.kandagatla@linaro.org Signed-off-by:
-
Peng Fan authored
commit 414a98ab upstream. The nregs for i.MX6SLL should be 80 per fuse map, correct it. Fixes: 6da27821 ("nvmem: imx-ocotp: add support for imx6sll") Cc: Stable@vger.kernel.org Signed-off-by:
-
Alain Volmat authored
commit c896ff2d upstream. In case of SMBUS byte read with PEC enabled, the whole transfer is split into two commands. A first write command, followed by a read command. The write command does not have any PEC byte and a PEC byte is appended at the end of the read command. (cf Read byte protocol with PEC in SMBUS specification) Within the STM32 I2C controller, handling (either sending or receiving) of the PEC byte is done via the PECBYTE bit in register CR2. Currently, the PECBYTE is set at the beginning of a transfer, which lead to sending a PEC byte at the end of the write command (hence losing the real last byte), and also does not check the PEC byte received during the read command. This patch corrects the function stm32f7_i2c_smbus_xfer_msg in order to only set the PECBYTE during the read command. Fixes: 9e48155f ("i2c: i2c-stm32f7: Add initial SMBus protocols support") Signed-off-by:
Alain Volmat <alain.volmat@foss.st.com> Reviewed-by:
Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Acked-by:
Andi Shyti <andi.shyti@kernel.org> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Herve Codina authored
commit 0fb118de upstream. i2c-demux-pinctrl uses the pair of_find_i2c_adapter_by_node() / i2c_put_adapter(). These pair alone is not correct to properly lock the I2C parent adapter. Indeed, i2c_put_adapter() decrements the module refcount while of_find_i2c_adapter_by_node() does not increment it. This leads to an underflow of the parent module refcount. Use the dedicated function, of_get_i2c_adapter_by_node(), to handle correctly the module refcount. Fixes: 50a5ba87 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by:
Herve Codina <herve.codina@bootlin.com> Cc: stable@vger.kernel.org Acked-by:
Peter Rosin <peda@axentia.se> Reviewed-by:
-
Herve Codina authored
commit 3dc0ec46 upstream. i2c-mux-gpmux uses the pair of_find_i2c_adapter_by_node() / i2c_put_adapter(). These pair alone is not correct to properly lock the I2C parent adapter. Indeed, i2c_put_adapter() decrements the module refcount while of_find_i2c_adapter_by_node() does not increment it. This leads to an underflow of the parent module refcount. Use the dedicated function, of_get_i2c_adapter_by_node(), to handle correctly the module refcount. Fixes: ac8498f0 ("i2c: i2c-mux-gpmux: new driver") Signed-off-by:
-
Herve Codina authored
commit 3171d37b upstream. i2c-mux-pinctrl uses the pair of_find_i2c_adapter_by_node() / i2c_put_adapter(). These pair alone is not correct to properly lock the I2C parent adapter. Indeed, i2c_put_adapter() decrements the module refcount while of_find_i2c_adapter_by_node() does not increment it. This leads to an underflow of the parent module refcount. Use the dedicated function, of_get_i2c_adapter_by_node(), to handle correctly the module refcount. Fixes: c4aee3e1 ("i2c: mux: pinctrl: remove platform_data") Signed-off-by:
-
Ivan Vecera authored
commit 77a8c982 upstream. The I40E_TXR_FLAGS_WB_ON_ITR is i40e_ring flag and not i40e_pf one. Fixes: 8e0764b4 ("i40e/i40evf: Add support for writeback on ITR feature for X722") Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231023212714.178032-1-jacob.e.keller@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 4530e5b8 upstream. Call skb_gso_validate_network_len() to check if packet is over PMTU. Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Mateusz Palczewski authored
[ Upstream commit 8c0b48e0 ] Add check for return of igb_update_ethtool_nfc_entry so that in case of any potential errors the memory alocated for input will be freed. Fixes: 0e71def2 ("igb: add support of RX network flow classification") Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Kunwu Chan authored
[ Upstream commit fb71ba0e ] reques -> request Fixes: 09dde54c ("PS3: gelic: Add wireless support for PS3") Signed-off-by:
Kunwu Chan <chentao@kylinos.cn> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Mirsad Goran Todorovac authored
[ Upstream commit f97eee48 ] KCSAN reported the following data-race bug: ================================================================== BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169 race at unknown origin, with read to 0xffff888117e43510 of 4 bytes by interrupt on cpu 21: rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169 __napi_poll (net/core/dev.c:6527) net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727) __do_softirq (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632) irq_exit_rcu (kernel/softirq.c:647) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14)) asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291) cpuidle_enter (drivers/cpuidle/cpuidle.c:390) call_cpuidle (kernel/sched/idle.c:135) do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282) cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433) value changed: 0x80003fff -> 0x3402805f Reported by Kernel Concurrency Sanitizer on: CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41 Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023 ================================================================== drivers/net/ethernet/realtek/r8169_main.c: ========================================== 4429 → 4430 status = le32_to_cpu(desc->opts1); 4431 if (status & DescOwn) 4432 break; 4433 4434 /* This barrier is needed to keep us from reading 4435 * any other fields out of the Rx descriptor until 4436 * we know the status of DescOwn 4437 */ 4438 dma_rmb(); 4439 4440 if (unlikely(status & RxRES)) { 4441 if (net_ratelimit()) 4442 netdev_warn(dev, "Rx ERROR. status = %08x\n", Marco Elver explained that dma_rmb() doesn't prevent the compiler to tear up the access to desc->opts1 which can be written to concurrently. READ_ONCE() should prevent that from happening: 4429 → 4430 status = le32_to_cpu(READ_ONCE(desc->opts1)); 4431 if (status & DescOwn) 4432 break; 4433 As the consequence of this fix, this KCSAN warning was eliminated. Fixes: 6202806e ("r8169: drop member opts1_mask from struct rtl8169_private") Suggested-by:
Marco Elver <elver@google.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: nic_swsd@realtek.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/ Signed-off-by:
Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Acked-by:
-
Mirsad Goran Todorovac authored
[ Upstream commit dcf75a0f ] KCSAN reported the following data-race: ================================================================== BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169 race at unknown origin, with read to 0xffff888140d37570 of 4 bytes by interrupt on cpu 21: rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169 __napi_poll (net/core/dev.c:6527) net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727) __do_softirq (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632) irq_exit_rcu (kernel/softirq.c:647) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14)) asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291) cpuidle_enter (drivers/cpuidle/cpuidle.c:390) call_cpuidle (kernel/sched/idle.c:135) do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282) cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433) value changed: 0xb0000042 -> 0x00000000 Reported by Kernel Concurrency Sanitizer on: CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41 Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023 ================================================================== The read side is in drivers/net/ethernet/realtek/r8169_main.c ========================================= 4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp, 4356 int budget) 4357 { 4358 unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0; 4359 struct sk_buff *skb; 4360 4361 dirty_tx = tp->dirty_tx; 4362 4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) { 4364 unsigned int entry = dirty_tx % NUM_TX_DESC; 4365 u32 status; 4366 → 4367 status = le32_to_cpu(tp->TxDescArray[entry].opts1); 4368 if (status & DescOwn) 4369 break; 4370 4371 skb = tp->tx_skb[entry].skb; 4372 rtl8169_unmap_tx_skb(tp, entry); 4373 4374 if (skb) { 4375 pkts_compl++; 4376 bytes_compl += skb->len; 4377 napi_consume_skb(skb, budget); 4378 } 4379 dirty_tx++; 4380 } 4381 4382 if (tp->dirty_tx != dirty_tx) { 4383 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl); 4384 WRITE_ONCE(tp->dirty_tx, dirty_tx); 4385 4386 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl, 4387 rtl_tx_slots_avail(tp), 4388 R8169_TX_START_THRS); 4389 /* 4390 * 8168 hack: TxPoll requests are lost when the Tx packets are 4391 * too close. Let's kick an extra TxPoll request when a burst 4392 * of start_xmit activity is detected (if it is not detected, 4393 * it is slow enough). -- FR 4394 * If skb is NULL then we come here again once a tx irq is 4395 * triggered after the last fragment is marked transmitted. 4396 */ 4397 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb) 4398 rtl8169_doorbell(tp); 4399 } 4400 } tp->TxDescArray[entry].opts1 is reported to have a data-race and READ_ONCE() fixes this KCSAN warning. 4366 → 4367 status = le32_to_cpu(READ_ONCE(tp->TxDescArray[entry].opts1)); 4368 if (status & DescOwn) 4369 break; 4370 Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: nic_swsd@realtek.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Marco Elver <elver@google.com> Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/ Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 25e992a4 ] In preparation of factoring out firmware handling rename r8169.c to r8169_main.c. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Maximilian Heyne authored
commit fab7f259 upstream. With the recent removal of vm_dev from devres its memory is only freed via the callback virtio_mmio_release_dev. However, this only takes effect after device_add is called by register_virtio_device. Until then it's an unmanaged resource and must be explicitly freed on error exit. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Cc: stable@vger.kernel.org Fixes: 55c91fed ("virtio-mmio: don't break lifecycle of vm_dev") Signed-off-by:
Maximilian Heyne <mheyne@amazon.de> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Tested-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com>
-
Gavin Shan authored
commit 07622bd415639e9709579f400afd19e7e9866e5e upstream. The deflation request to the target, which isn't unaligned to the guest page size causes endless deflation and inflation actions. For example, we receive the flooding QMP events for the changes on memory balloon's size after a deflation request to the unaligned target is sent for the ARM64 guest, where we have 64KB base page size. /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \ -accel kvm -machine virt,gic-version=host -cpu host \ -smp maxcpus=8,cpus=8,sockets=2,clusters=2,cores=2,threads=1 \ -m 1024M,slots=16,maxmem=64G \ -object memory-backend-ram,id=mem0,size=512M \ -object memory-backend-ram,id=mem1,size=512M \ -numa node,nodeid=0,memdev=mem0,cpus=0-3 \ -numa node,nodeid=1,memdev=mem1,cpus=4-7 \ : \ -device virtio-balloon-pci,id=balloon0,bus=pcie.10 { "execute" : "balloon", "arguments": { "value" : 1073672192 } } {"return": {}} {"timestamp": {"seconds": 1693272173, "microseconds": 88667}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272174, "microseconds": 89704}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272175, "microseconds": 90819}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272176, "microseconds": 91961}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272177, "microseconds": 93040}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}} {"timestamp": {"seconds": 1693272178, "microseconds": 94117}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}} {"timestamp": {"seconds": 1693272179, "microseconds": 95337}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272180, "microseconds": 96615}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}} {"timestamp": {"seconds": 1693272181, "microseconds": 97626}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272182, "microseconds": 98693}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}} {"timestamp": {"seconds": 1693272183, "microseconds": 99698}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272184, "microseconds": 100727}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272185, "microseconds": 90430}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272186, "microseconds": 102999}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}} : <The similar QMP events repeat> Fix it by aligning the target up to the guest page size, 64KB in this specific case. With this applied, no flooding QMP events are observed and the memory balloon's size can be stablizied to 0x3ffe0000 soon after the deflation request is sent. { "execute" : "balloon", "arguments": { "value" : 1073672192 } } {"return": {}} {"timestamp": {"seconds": 1693273328, "microseconds": 793075}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} { "execute" : "query-balloon" } {"return": {"actual": 1073610752}} Cc: stable@vger.kernel.org Signed-off-by:Gavin Shan <gshan@redhat.com> Tested-by:
Zhenyu Zhang <zhenyzha@redhat.com> Message-Id: <20230831011007.1032822-1-gshan@redhat.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Rodríguez Barbarin, José Javier authored
[ Upstream commit 2025b2ca ] mcb-lpc requests a fixed-size memory region to parse the chameleon table, however, if the chameleon table is smaller that the allocated region, it could overlap with the IP Cores' memory regions. After parsing the chameleon table, drop/reallocate the memory region with the actual chameleon table size. Co-developed-by:
Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com> Signed-off-by:
Javier Rodriguez <josejavier.rodriguez@duagon.com> Signed-off-by:
Johannes Thumshirn <jth@kernel.org> Link: https://lore.kernel.org/r/20230411083329.4506-4-jth@kernel.org Signed-off-by:
-
Rodríguez Barbarin, José Javier authored
[ Upstream commit a889c276 ] The function chameleon_parse_cells() returns the number of cells parsed which has an undetermined size. This return value is only used for error checking but the number of cells is never used. Change return value to be number of bytes parsed to allow for memory management improvements. Co-developed-by:
-
Francis Laniel authored
[ Upstream commit 03b80ff8 ] If name_show() is non unique, this test will try to install a kprobe on this function which should fail returning EADDRNOTAVAIL. On kernel where name_show() is not unique, this test is skipped. Link: https://lore.kernel.org/all/20231020104250.9537-3-flaniel@linux.microsoft.com/ Cc: stable@vger.kernel.org Signed-off-by:
Francis Laniel <flaniel@linux.microsoft.com> Acked-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by:
-
Haibo Chen authored
[ Upstream commit 32a9cdb8 ] tuning only support in 4-bit mode or 8 bit mode, so in 1-bit mode, need to hold retuning. Find this issue when use manual tuning method on imx93. When system resume back, SDIO WIFI try to switch back to 4 bit mode, first will trigger retuning, and all tuning command failed. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Fixes: dfa13ebb ("mmc: host: Add facility to support re-tuning") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230830093922.3095850-1-haibo.chen@nxp.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Ulf Hansson authored
[ Upstream commit 6ebc581c ] It looks like the original idea behind always doing a re-initialization of a removable SDIO card during system resume in mmc_sdio_resume(), is to try to play safe to detect whether the card has been removed. However, this seems like a really a bad idea as it will most likely screw things up, especially when the card is expected to remain powered on during system suspend by the SDIO func driver. Let's fix this, simply by trusting that the detect work checks if the card is alive and inserted, which is being scheduled at the PM_POST_SUSPEND notification anyway. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
- Oct 25, 2023
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20231023104813.580375891@linuxfoundation.org Tested-by:
Pavel Machek (CIP) <pavel@denx.de> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Zhang Changzhong authored
[ Upstream commit cc9b364b ] There are race conditions that may lead to inet6_dev refcount underflow in xfrm6_dst_destroy() and rt6_uncached_list_flush_dev(). One of the refcount underflow bugs is shown below: (cpu 1) | (cpu 2) xfrm6_dst_destroy() | ... | in6_dev_put() | | rt6_uncached_list_flush_dev() ... | ... | in6_dev_put() rt6_uncached_list_del() | ... ... | xfrm6_dst_destroy() calls rt6_uncached_list_del() after in6_dev_put(), so rt6_uncached_list_flush_dev() has a chance to call in6_dev_put() again for the same inet6_dev. Fix it by moving in6_dev_put() after rt6_uncached_list_del() in xfrm6_dst_destroy(). Fixes: 510c321b ("xfrm: reuse uncached_list to track xdsts") Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Kees Cook authored
commit cb3871b1 upstream. The code pattern of memcpy(dst, src, strlen(src)) is almost always wrong. In this case it is wrong because it leaves memory uninitialized if it is less than sizeof(ni->name), and overflows ni->name when longer. Normally strtomem_pad() could be used here, but since ni->name is a trailing array in struct hci_mon_new_index, compilers that don't support -fstrict-flex-arrays=3 can't tell how large this array is via __builtin_object_size(). Instead, open-code the helper and use sizeof() since it will work correctly. Additionally mark ni->name as __nonstring since it appears to not be a %NUL terminated C string. Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Edward AD <twuufnxlz@gmail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-bluetooth@vger.kernel.org Cc: netdev@vger.kernel.org Fixes: 18f547f3 ("Bluetooth: hci_sock: fix slab oob read in create_monitor_event") Link: https://lore.kernel.org/lkml/202310110908.F2639D3276@keescook/ Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
-
Edward AD authored
commit 18f547f3 upstream. When accessing hdev->name, the actual string length should prevail Reported-by:
<syzbot+c90849c50ed209d77689@syzkaller.appspotmail.com> Fixes: dcda1657 ("Bluetooth: hci_core: Fix build warnings") Signed-off-by:
Edward AD <twuufnxlz@gmail.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit b99e0ba9 ] Otherwise we will get an underflow on remove. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Fixes: f7f50b2a ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Signed-off-by:
Tony Lindgren <tony@atomide.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230913060433.48373-2-tony@atomide.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit aa6464ed ] Free the "priv" pointer before returning the error code. Fixes: 90eb6b59 ("ASoC: pxa-ssp: add support for an external clock in devicetree") Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Haibo Chen authored
commit fc363413 upstream. We found a glitch when configuring the pad as output high. To avoid this glitch, move the data value setting before direction config in the function vf610_gpio_direction_output(). Fixes: 659d8a62 ("gpio: vf610: add imx7ulp support") Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by:
-
Niklas Schnelle authored
commit c1ae1c59 upstream. Since the fixed commits both zdev->iommu_bitmap and zdev->lazy_bitmap are allocated as vzalloc(zdev->iommu_pages / 8). The problem is that zdev->iommu_bitmap is a pointer to unsigned long but the above only yields an allocation that is a multiple of sizeof(unsigned long) which is 8 on s390x if the number of IOMMU pages is a multiple of 64. This in turn is the case only if the effective IOMMU aperture is a multiple of 64 * 4K = 256K. This is usually the case and so didn't cause visible issues since both the virt_to_phys(high_memory) reduced limit and hardware limits use nice numbers. Under KVM, and in particular with QEMU limiting the IOMMU aperture to the vfio DMA limit (default 65535), it is possible for the reported aperture not to be a multiple of 256K however. In this case we end up with an iommu_bitmap whose allocation is not a multiple of 8 causing bitmap operations to access it out of bounds. Sadly we can't just fix this in the obvious way and use bitmap_zalloc() because for large RAM systems (tested on 8 TiB) the zdev->iommu_bitmap grows too large for kmalloc(). So add our own bitmap_vzalloc() wrapper. This might be a candidate for common code, but this area of code will be replaced by the upcoming conversion to use the common code DMA API on s390 so just add a local routine. Fixes: 22459321 ("s390/pci: use virtual memory for iommu bitmap") Fixes: 13954fd6 ("s390/pci_dma: improve lazy flush for unmap") Cc: stable@vger.kernel.org Reviewed-by:
Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Peter Zijlstra authored
commit 32671e37 upstream. Because group consistency is non-atomic between parent (filedesc) and children (inherited) events, it is possible for PERF_FORMAT_GROUP read() to try and sum non-matching counter groups -- with non-sensical results. Add group_generation to distinguish the case where a parent group removes and adds an event and thus has the same number, but a different configuration of events as inherited groups. This became a problem when commit fa8c2693 ("perf/core: Invert perf_read_group() loops") flipped the order of child_list and sibling_list. Previously it would iterate the group (sibling_list) first, and for each sibling traverse the child_list. In this order, only the group composition of the parent is relevant. By flipping the order the group composition of the child (inherited) events becomes an issue and the mis-match in group composition becomes evident. That said; even prior to this commit, while reading of a group that is not equally inherited was not broken, it still made no sense. (Ab)use ECHILD as error return to indicate issues with child process group composition. Fixes: fa8c2693 ("perf/core: Invert perf_read_group() loops") Reported-by:
Budimir Markovic <markovicbudimir@gmail.com> Signed-off-by:
-
Puliang Lu authored
commit 52480e1f upstream. Update the USB serial option driver support for the Fibocom FM101R-GL LTE modules as there are actually several different variants. - VID:PID 413C:8213, FM101R-GL are laptop M.2 cards (with MBIM interfaces for Linux) - VID:PID 413C:8215, FM101R-GL ESIM are laptop M.2 cards (with MBIM interface for Linux) 0x8213: mbim, tty 0x8215: mbim, tty T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=8213 Rev= 5.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=a3b7cbf0 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=8215 Rev= 5.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=a3b7cbf0 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by:
Puliang Lu <puliang.lu@fibocom.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Benoît Monin authored
commit 064f6e2b upstream. Following a firmware update of the modem, the interface for the AT command port changed, so add it back. T: Bus=08 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=1199 ProdID=90d3 Rev=00.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM9191 S: SerialNumber=xxxxxxxxxxxxxxxx C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by:
Benoît Monin <benoit.monin@gmx.fr> Cc: stable@vger.kernel.org Signed-off-by:
-
Fabio Porcedda authored
commit 6a7be48e upstream. Add support for the following Telit LE910C4-WWX composition: 0x1035: TTY, TTY, ECM T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1035 Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=e1b117c7 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Fabio Porcedda <fabio.porcedda@gmail.com> Cc: stable@vger.kernel.org Reviewed-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
