Select Git revision
Search by author
- Any Author
- authors
-
72162444 72162444 gaochangning
-
Aakash Dave aakash.dave
-
Aaron Kim akim
-
Aaron Kloc akloc
-
Aaron Lan aaron.lan
-
Aaron Nabil aaronna
-
Aaron Pohle aaron.pohle
-
Abbott Chung chung.abbott
-
Abdallah Omar abdallah_omar
-
Abdessamii Chalbi abdessamii.chalbi
-
Abdul Hussain Sirajudeen abdul.hussain
-
Abdullah Alghamdi a.alghamdi
-
Abdullah Elmarghany abdullah_elmarghany
-
Abel Fang abel_fang
-
Abhijeet Badurkar abhijeet.badurkar
-
Abhijit Adsule adsule
-
Abhijit Murthy abhijit
-
Abhi Khanal akhanal
-
Abhilash Sahoo abhilashsahoo
-
Abhimanyu Raj abhimanyu.raj
- Jul 12, 2022
-
-
Duoming Zhou authored
commit 148ca045 upstream. There are UAF bugs caused by rose_t0timer_expiry(). The root cause is that del_timer() could not stop the timer handler that is running and there is no synchronization. One of the race conditions is shown below: (thread 1) | (thread 2) | rose_device_event | rose_rt_device_down | rose_remove_neigh rose_t0timer_expiry | rose_stop_t0timer(rose_neigh) ... | del_timer(&neigh->t0timer) | kfree(rose_neigh) //[1]FREE neigh->dce_mode //[2]USE | The rose_neigh is deallocated in position [1] and use in position [2]. The crash trace triggered by POC is like below: BUG: KASAN: use-after-free in expire_timers+0x144/0x320 Write of size 8 at addr ffff888009b19658 by task swapper/0/0 ... Call Trace: <IRQ> dump_stack_lvl+0xbf/0xee print_address_description+0x7b/0x440 print_report+0x101/0x230 ? expire_timers+0x144/0x320 kasan_report+0xed/0x120 ? expire_timers+0x144/0x320 expire_timers+0x144/0x320 __run_timers+0x3ff/0x4d0 run_timer_softirq+0x41/0x80 __do_softirq+0x233/0x544 ... This patch changes rose_stop_ftimer() and rose_stop_t0timer() in rose_remove_neigh() to del_timer_sync() in order that the timer handler could be finished before the resources such as rose_neigh and so on are deallocated. As a result, the UAF bugs could be mitigated. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220705125610.77971-1-duoming@zju.edu.cn Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit b55a21b7 upstream. usbnet_write_cmd_async() mixed up which buffers need to be freed in which error case. v2: add Fixes tag v3: fix uninitialized buf pointer Fixes: 877bd862 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220705125351.17309-1-oneukum@suse.com Signed-off-by:
-
Rhett Aultman authored
commit 2bda24ef upstream. The gs_usb driver appears to suffer from a malady common to many USB CAN adapter drivers in that it performs usb_alloc_coherent() to allocate a number of USB request blocks (URBs) for RX, and then later relies on usb_kill_anchored_urbs() to free them, but this doesn't actually free them. As a result, this may be leaking DMA memory that's been used by the driver. This commit is an adaptation of the techniques found in the esd_usb2 driver where a similar design pattern led to a memory leak. It explicitly frees the RX URBs and their DMA memory via a call to usb_free_coherent(). Since the RX URBs were allocated in the gs_can_open(), we remove them in gs_can_close() rather than in the disconnect function as was done in esd_usb2. For more information, see the 928150fa ("can: esd_usb2: fix memory leak"). Link: https://lore.kernel.org/all/alpine.DEB.2.22.394.2206031547001.1630869@thelappy Fixes: d08e973a ("can: gs_usb: Added support for the GS_USB CAN devices") Cc: stable@vger.kernel.org Signed-off-by:
Rhett Aultman <rhett.aultman@samsara.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Liang He authored
commit 562fed94 upstream. In grcan_probe(), of_find_node_by_path() has already increased the refcount. There is no need to call of_node_get() again, so remove it. Link: https://lore.kernel.org/all/20220619070257.4067022-1-windhl@126.com Fixes: 1e93ed26 ("can: grcan: grcan_probe(): fix broken system id check for errata workaround needs") Cc: stable@vger.kernel.org # v5.18 Cc: Andreas Larsson <andreas@gaisler.com> Signed-off-by:
Liang He <windhl@126.com> Signed-off-by:
-
Jann Horn authored
commit eeaa345e upstream. The fastpath in slab_alloc_node() assumes that c->slab is stable as long as the TID stays the same. However, two places in __slab_alloc() currently don't update the TID when deactivating the CPU slab. If multiple operations race the right way, this could lead to an object getting lost; or, in an even more unlikely situation, it could even lead to an object being freed onto the wrong slab's freelist, messing up the `inuse` counter and eventually causing a page to be freed to the page allocator while it still contains slab objects. (I haven't actually tested these cases though, this is just based on looking at the code. Writing testcases for this stuff seems like it'd be a pain...) The race leading to state inconsistency is (all operations on the same CPU and kmem_cache): - task A: begin do_slab_free(): - read TID - read pcpu freelist (==NULL) - check `slab == c->slab` (true) - [PREEMPT A->B] - task B: begin slab_alloc_node(): - fastpath fails (`c->freelist` is NULL) - enter __slab_alloc() - slub_get_cpu_ptr() (disables preemption) - enter ___slab_alloc() - take local_lock_irqsave() - read c->freelist as NULL - get_freelist() returns NULL - write `c->slab = NULL` - drop local_unlock_irqrestore() - goto new_slab - slub_percpu_partial() is NULL - get_partial() returns NULL - slub_put_cpu_ptr() (enables preemption) - [PREEMPT B->A] - task A: finish do_slab_free(): - this_cpu_cmpxchg_double() succeeds() - [CORRUPT STATE: c->slab==NULL, c->freelist!=NULL] From there, the object on c->freelist will get lost if task B is allowed to continue from here: It will proceed to the retry_load_slab label, set c->slab, then jump to load_freelist, which clobbers c->freelist. But if we instead continue as follows, we get worse corruption: - task A: run __slab_free() on object from other struct slab: - CPU_PARTIAL_FREE case (slab was on no list, is now on pcpu partial) - task A: run slab_alloc_node() with NUMA node constraint: - fastpath fails (c->slab is NULL) - call __slab_alloc() - slub_get_cpu_ptr() (disables preemption) - enter ___slab_alloc() - c->slab is NULL: goto new_slab - slub_percpu_partial() is non-NULL - set c->slab to slub_percpu_partial(c) - [CORRUPT STATE: c->slab points to slab-1, c->freelist has objects from slab-2] - goto redo - node_match() fails - goto deactivate_slab - existing c->freelist is passed into deactivate_slab() - inuse count of slab-1 is decremented to account for object from slab-2 At this point, the inuse count of slab-1 is 1 lower than it should be. This means that if we free all allocated objects in slab-1 except for one, SLUB will think that slab-1 is completely unused, and may free its page, leading to use-after-free. Fixes: c17dda40 ("slub: Separate out kmem_cache_cpu processing from deactivate_slab") Fixes: 03e404af ("slub: fast release on full slab") Cc: stable@vger.kernel.org Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
Christoph Lameter <cl@linux.com> Acked-by:
David Rientjes <rientjes@google.com> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Tested-by:
Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/r/20220608182205.2945720-1-jannh@google.com Signed-off-by:
-
Sabrina Dubroca authored
commit 5bd8baab upstream. Commit ebe48d36 ("esp: Fix possible buffer overflow in ESP transformation") tried to fix skb_page_frag_refill usage in ESP by capping allocsize to 32k, but that doesn't completely solve the issue, as skb_page_frag_refill may return a single page. If that happens, we will write out of bounds, despite the check introduced in the previous patch. This patch forces COW in cases where we would end up calling skb_page_frag_refill with a size larger than a page (first in esp_output_head with tailen, then in esp_output_tail with skb->data_len). Fixes: cac2661c ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
- Jul 07, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220705115606.333669144@linuxfoundation.org Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Daniele Palmas authored
commit 94f2a444 upstream. Add the following Telit FN990 composition: 0x1070: tty, adb, rmnet, tty, tty, tty, tty Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20211210095722.22269-1-dnlplm@gmail.com Signed-off-by:
-
Carlo Lobrano authored
commit 8d17a33b upstream. This patch adds support for Telit LN920 0x1060 composition 0x1060: tty, adb, rmnet, tty, tty, tty, tty Signed-off-by:
Carlo Lobrano <c.lobrano@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by:
-
Oleksandr Tyshchenko authored
commit b75cd218 upstream. During the PV driver life cycle the mappings are added to the RB-tree by set_foreign_p2m_mapping(), which is called from gnttab_map_refs() and are removed by clear_foreign_p2m_mapping() which is called from gnttab_unmap_refs(). As both functions end up calling __set_phys_to_machine_multi() which updates the RB-tree, this function can be called concurrently. There is already a "p2m_lock" to protect against concurrent accesses, but the problem is that the first read of "phys_to_mach.rb_node" in __set_phys_to_machine_multi() is not covered by it, so this might lead to the incorrect mappings update (removing in our case) in RB-tree. In my environment the related issue happens rarely and only when PV net backend is running, the xen_add_phys_to_mach_entry() claims that it cannot add new pfn <-> mfn mapping to the tree since it is already exists which results in a failure when mapping foreign pages. But there might be other bad consequences related to the non-protected root reads such use-after-free, etc. While at it, also fix the similar usage in __pfn_to_mfn(), so initialize "struct rb_node *n" with the "p2m_lock" held in both functions to avoid possible bad consequences. This is CVE-2022-33744 / XSA-406. Signed-off-by:
Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by:
Stefano Stabellini <sstabellini@kernel.org> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Roger Pau Monne authored
commit 2400617d upstream. Split the current bounce buffering logic used with persistent grants into it's own option, and allow enabling it independently of persistent grants. This allows to reuse the same code paths to perform the bounce buffering required to avoid leaking contiguous data in shared pages not part of the request fragments. Reporting whether the backend is to be trusted can be done using a module parameter, or from the xenstore frontend path as set by the toolstack when adding the device. This is CVE-2022-33742, part of XSA-403. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
-
Roger Pau Monne authored
commit 4491001c upstream. Bounce all data on the skbs to be transmitted into zeroed pages if the backend is untrusted. This avoids leaking data present in the pages shared with the backend but not part of the skb fragments. This requires introducing a new helper in order to allocate skbs with a size multiple of XEN_PAGE_SIZE so we don't leak contiguous data on the granted pages. Reporting whether the backend is to be trusted can be done using a module parameter, or from the xenstore frontend path as set by the toolstack when adding the device. This is CVE-2022-33741, part of XSA-403. Signed-off-by:
-
Roger Pau Monne authored
commit 307c8de2 upstream. When allocating pages to be used for shared communication with the backend always zero them, this avoids leaking unintended data present on the pages. This is CVE-2022-33740, part of XSA-403. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Reviewed-by:
-
Roger Pau Monne authored
commit 2f446ffe upstream. When allocating pages to be used for shared communication with the backend always zero them, this avoids leaking unintended data present on the pages. This is CVE-2022-26365, part of XSA-403. Signed-off-by:
-
Ilya Lesokhin authored
commit 08303c18 upstream. [ jgross@suse.com: added as needed by XSA-403 mitigation ] copy_skb_header is renamed to skb_copy_header and exported. Exposing this function give more flexibility in copying SKBs. skb_copy and skb_copy_expand do not give enough control over which parts are copied. Signed-off-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
-
katrinzhou authored
commit adabdd8f upstream. When kcalloc fails, ipip6_tunnel_get_prl() should return -ENOMEM. Move the position of label "out" to return correctly. Addresses-Coverity: ("Unused value") Fixes: 300aaeea ("[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL.") Signed-off-by:
katrinzhou <katrinzhou@tencent.com> Reviewed-by:
Eric <Dumazet<edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220628035030.1039171-1-zys.zljxml@gmail.com Signed-off-by:
-
kernel test robot authored
commit 284fda1e upstream. Opportunity for min() Generated by: scripts/coccinelle/misc/minmax.cocci CC: Denis Efremov <efremov@linux.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Yang Yingliang authored
[ Upstream commit d0e51022 ] If platform_device_add() fails, it no need to call platform_device_del(), split platform_device_unregister() into platform_device_del/put(), so platform_device_put() can be called separately. Fixes: 8808a793 ("ibmaem: new driver for power/energy/temp meters in IBM System X hardware") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220701074153.4021556-1-yangyingliang@huawei.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Demi Marie Obenour authored
commit dbe97cff upstream. unmap_grant_pages() currently waits for the pages to no longer be used. In https://github.com/QubesOS/qubes-issues/issues/7481 , this lead to a deadlock against i915: i915 was waiting for gntdev's MMU notifier to finish, while gntdev was waiting for i915 to free its pages. I also believe this is responsible for various deadlocks I have experienced in the past. Avoid these problems by making unmap_grant_pages async. This requires making it return void, as any errors will not be available when the function returns. Fortunately, the only use of the return value is a WARN_ON(), which can be replaced by a WARN_ON when the error is detected. Additionally, a failed call will not prevent further calls from being made, but this is harmless. Because unmap_grant_pages is now async, the grant handle will be sent to INVALID_GRANT_HANDLE too late to prevent multiple unmaps of the same handle. Instead, a separate bool array is allocated for this purpose. This wastes memory, but stuffing this information in padding bytes is too fragile. Furthermore, it is necessary to grab a reference to the map before making the asynchronous call, and release the reference when the call returns. It is also necessary to guard against reentrancy in gntdev_map_put(), and to handle the case where userspace tries to map a mapping whose contents have not all been freed yet. Fixes: 74528225 ("xen/gntdev: safely unmap grants in case they are still in use") Cc: stable@vger.kernel.org Signed-off-by:
Demi Marie Obenour <demi@invisiblethingslab.com> Reviewed-by:
-
Michael Walle authored
commit eddd95b9 upstream. There are packets which doesn't have a payload. In that case, the second i2c_master_read() will have a zero length. But because the NFC controller doesn't have any data left, it will NACK the I2C read and -ENXIO will be returned. In case there is no payload, just skip the second i2c master read. Fixes: 6be88670 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver") Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Krzysztof authoredcommit 5a478a65 upstream. The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO. Reported-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Fixes: caf6e49b ("NFC: nfcmrvl: add spi driver") Signed-off-by:
-
Yevhen Orlov authored
commit 050133e1 upstream. commit 0622cab0 ("bonding: fix 802.3ad aggregator reselection"), resolve case, when there is several aggregation groups in the same bond. bond_3ad_unbind_slave will invalidate (clear) aggregator when __agg_active_ports return zero. So, ad_clear_agg can be executed even, when num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for, previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave will not update slave ports list, because lag_ports==NULL. So, here we got slave ports, pointing to freed aggregator memory. Fix with checking actual number of ports in group (as was before commit 0622cab0 ("bonding: fix 802.3ad aggregator reselection") ), before ad_clear_agg(). The KASAN logs are as follows: [ 767.617392] ================================================================== [ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470 [ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767 [ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15 [ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler [ 767.666468] Call trace: [ 767.668930] dump_backtrace+0x0/0x2d0 [ 767.672625] show_stack+0x24/0x30 [ 767.675965] dump_stack_lvl+0x68/0x84 [ 767.679659] print_address_description.constprop.0+0x74/0x2b8 [ 767.685451] kasan_report+0x1f0/0x260 [ 767.689148] __asan_load2+0x94/0xd0 [ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470 Fixes: 0622cab0 ("bonding: fix 802.3ad aggregator reselection") Co-developed-by:
Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by:
Yevhen Orlov <yevhen.orlov@plvision.eu> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20220629012914.361-1-yevhen.orlov@plvision.eu Signed-off-by:
-
Eric Dumazet authored
commit ab84db25 upstream. syzbot has two reports involving the same root cause. bond_alb_initialize() must not set bond->alb_info.rlb_enabled if a memory allocation error is detected. Report 1: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 0 PID: 12276 Comm: kworker/u4:10 Not tainted 5.19.0-rc3-syzkaller-00132-g3b89b511ea0c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:rlb_clear_slave+0x10e/0x690 drivers/net/bonding/bond_alb.c:393 Code: 8e fc 83 fb ff 0f 84 74 02 00 00 e8 cc 2a 8e fc 48 8b 44 24 08 89 dd 48 c1 e5 06 4c 8d 34 28 49 8d 7e 14 48 89 f8 48 c1 e8 03 <42> 0f b6 14 20 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RSP: 0018:ffffc90018a8f678 EFLAGS: 00010203 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88803375bb00 RSI: ffffffff84ec4ac4 RDI: 0000000000000014 RBP: 0000000000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff8880ac889000 R14: 0000000000000000 R15: ffff88815a668c80 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005597077e10b0 CR3: 0000000026668000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bond_alb_deinit_slave+0x43c/0x6b0 drivers/net/bonding/bond_alb.c:1663 __bond_release_one.cold+0x383/0xd53 drivers/net/bonding/bond_main.c:2370 bond_slave_netdev_event drivers/net/bonding/bond_main.c:3778 [inline] bond_netdev_event+0x993/0xad0 drivers/net/bonding/bond_main.c:3889 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] unregister_netdevice_many+0x948/0x18b0 net/core/dev.c:10839 default_device_exit_batch+0x449/0x590 net/core/dev.c:11333 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> Report 2: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 5206 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-12108-g58f9d52ff689 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rlb_req_update_slave_clients+0x109/0x2f0 drivers/net/bonding/bond_alb.c:502 Code: 5d 18 8f fc 41 80 3e 00 0f 85 a5 01 00 00 89 d8 48 c1 e0 06 49 03 84 24 68 01 00 00 48 8d 78 30 49 89 c7 48 89 fa 48 c1 ea 03 <80> 3c 2a 00 0f 85 98 01 00 00 4d 39 6f 30 75 83 e8 22 18 8f fc 49 RSP: 0018:ffffc9000300ee80 EFLAGS: 00010206 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90016c11000 RDX: 0000000000000006 RSI: ffffffff84eb6bf3 RDI: 0000000000000030 RBP: dffffc0000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: ffff888027c80c80 R13: ffff88807d7ff800 R14: ffffed1004f901bd R15: 0000000000000000 FS: 00007f6f46c58700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 00000000516cc000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> alb_fasten_mac_swap+0x886/0xa80 drivers/net/bonding/bond_alb.c:1070 bond_alb_handle_active_change+0x624/0x1050 drivers/net/bonding/bond_alb.c:1765 bond_change_active_slave+0xfa1/0x29b0 drivers/net/bonding/bond_main.c:1173 bond_select_active_slave+0x23f/0xa50 drivers/net/bonding/bond_main.c:1253 bond_enslave+0x3b34/0x53b0 drivers/net/bonding/bond_main.c:2159 do_set_master+0x1c8/0x220 net/core/rtnetlink.c:2577 rtnl_newlink_create net/core/rtnetlink.c:3380 [inline] __rtnl_newlink+0x13ac/0x17e0 net/core/rtnetlink.c:3580 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593 rtnetlink_rcv_msg+0x43a/0xc90 net/core/rtnetlink.c:6089 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f6f45a89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6f46c58168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6f45b9c030 RCX: 00007f6f45a89109 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000006 RBP: 00007f6f45ae308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffed99029af R14: 00007f6f46c58300 R15: 0000000000022000 </TASK> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 05907f10 upstream. This patch fixes a race condition. nft_rhash_update() might fail for two reasons: - Element already exists in the hashtable. - Another packet won race to insert an entry in the hashtable. In both cases, new() has already bumped the counter via atomic_add_unless(), therefore, decrement the set element counter. Fixes: 22fe54d5 ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jason Wang authored
commit 11a37eb6 upstream. We currently depend on probe() calling virtio_device_ready() - which happens after netdev registration. Since ndo_open() can be called immediately after register_netdev, this means there exists a race between ndo_open() and virtio_device_ready(): the driver may start to use the device (e.g. TX) before DRIVER_OK which violates the spec. Fix this by switching to use register_netdevice() and protect the virtio_device_ready() with rtnl_lock() to make sure ndo_open() can only be called after virtio_device_ready(). Fixes: 0d2e1a29 ("caif_virtio: Introduce caif over virtio") Signed-off-by:
Jason Wang <jasowang@redhat.com> Message-Id: <20220620051115.3142-3-jasowang@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
YueHaibing authored
commit 53ad4616 upstream. As of commit 5801f064 ("net: ipv6: unexport __init-annotated seg6_hmac_init()"), EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. This remove the EXPORT_SYMBOL to fix modpost warning: WARNING: modpost: vmlinux.o(___ksymtab+seg6_hmac_net_init+0x0): Section mismatch in reference from the variable __ksymtab_seg6_hmac_net_init to the function .init.text:seg6_hmac_net_init() The symbol seg6_hmac_net_init is exported and annotated __init Fix this by removing the __init annotation of seg6_hmac_net_init or drop the export. Fixes: bf355b8d ("ipv6: sr: add core files for SR HMAC support") Reported-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20220628033134.21088-1-yuehaibing@huawei.com Signed-off-by:
-
Oliver Neukum authored
commit e65af540 upstream. usbnet provides some helper functions that are also used in the context of reset() operations. During a reset the other drivers on a device are unable to operate. As that can be block drivers, a driver for another interface cannot use paging in its memory allocations without risking a deadlock. Use GFP_NOIO in the helpers. Fixes: 877bd862 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by:
-
Kamal Heib authored
commit 118f7674 upstream. Make sure to save the passed QP timeout attribute when the QP gets modified, so when calling query QP the right value is reported and not the converted value that is required by the firmware. This issue was found while running the pyverbs tests. Fixes: cecbcddf ("qedr: Add support for QP verbs") Link: https://lore.kernel.org/r/20220525132029.84813-1-kamalheib1@gmail.com Signed-off-by:
Kamal Heib <kamalheib1@gmail.com> Acked-by:
Michal <Kalderon <michal.kalderon@marvell.com> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Jose Alonso authored
commit f8ebb3ac upstream. This patch corrects packet receiving in ax88179_rx_fixup. - problem observed: ifconfig shows allways a lot of 'RX Errors' while packets are received normally. This occurs because ax88179_rx_fixup does not recognise properly the usb urb received. The packets are normally processed and at the end, the code exits with 'return 0', generating RX Errors. (pkt_cnt==-2 and ptk_hdr over field rx_hdr trying to identify another packet there) This is a usb urb received by "tcpdump -i usbmon2 -X" on a little-endian CPU: 0x0000: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ^ packet 1 start (pkt_len = 0x05ec) ^^^^ IP alignment pseudo header ^ ethernet packet start last byte ethernet packet v padding (8-bytes aligned) vvvv vvvv 0x05e0: c92d d444 1420 8a69 83dd 272f e82b 9811 0x05f0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... ^ packet 2 0x0be0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... 0x1130: 9d41 9171 8a38 0ec5 eeee f8e3 3b19 87a0 ... 0x1720: 8cfc 15ff 5e4c e85c eeee f8e3 3b19 87a0 ... 0x1d10: ecfa 2a3a 19ab c78c eeee f8e3 3b19 87a0 ... 0x2070: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... ^ packet 7 0x2120: 7c88 4ca5 5c57 7dcc 0d34 7577 f778 7e0a 0x2130: f032 e093 7489 0740 3008 ec05 0000 0080 ====1==== ====2==== hdr_off ^ pkt_len = 0x05ec ^^^^ AX_RXHDR_*=0x00830 ^^^^ ^ pkt_len = 0 ^^^^ AX_RXHDR_DROP_ERR=0x80000000 ^^^^ ^ 0x2140: 3008 ec05 0000 0080 3008 5805 0000 0080 0x2150: 3008 ec05 0000 0080 3008 ec05 0000 0080 0x2160: 3008 5803 0000 0080 3008 c800 0000 0080 ===11==== ===12==== ===13==== ===14==== 0x2170: 0000 0000 0e00 3821 ^^^^ ^^^^ rx_hdr ^^^^ pkt_cnt=14 ^^^^ hdr_off=0x2138 ^^^^ ^^^^ padding The dump shows that pkt_cnt is the number of entrys in the per-packet metadata. It is "2 * packet count". Each packet have two entrys. The first have a valid value (pkt_len and AX_RXHDR_*) and the second have a dummy-header 0x80000000 (pkt_len=0 with AX_RXHDR_DROP_ERR). Why exists dummy-header for each packet?!? My guess is that this was done probably to align the entry for each packet to 64-bits and maintain compatibility with old firmware. There is also a padding (0x00000000) before the rx_hdr to align the end of rx_hdr to 64-bit. Note that packets have a alignment of 64-bits (8-bytes). This patch assumes that the dummy-header and the last padding are optional. So it preserves semantics and recognises the same valid packets as the current code. This patch was made using only the dumpfile information and tested with only one device: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet Fixes: 57bc3d3a ("net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup") Fixes: e2ca90c2 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by:
Jose Alonso <joalonsof@gmail.com> Acked-by:
-
Duoming Zhou authored
commit 9cc02ede upstream. There are UAF bugs in rose_heartbeat_expiry(), rose_timer_expiry() and rose_idletimer_expiry(). The root cause is that del_timer() could not stop the timer handler that is running and the refcount of sock is not managed properly. One of the UAF bugs is shown below: (thread 1) | (thread 2) | rose_bind | rose_connect | rose_start_heartbeat rose_release | (wait a time) case ROSE_STATE_0 | rose_destroy_socket | rose_heartbeat_expiry rose_stop_heartbeat | sock_put(sk) | ... sock_put(sk) // FREE | | bh_lock_sock(sk) // USE The sock is deallocated by sock_put() in rose_release() and then used by bh_lock_sock() in rose_heartbeat_expiry(). Although rose_destroy_socket() calls rose_stop_heartbeat(), it could not stop the timer that is running. The KASAN report triggered by POC is shown below: BUG: KASAN: use-after-free in _raw_spin_lock+0x5a/0x110 Write of size 4 at addr ffff88800ae59098 by task swapper/3/0 ... Call Trace: <IRQ> dump_stack_lvl+0xbf/0xee print_address_description+0x7b/0x440 print_report+0x101/0x230 ? irq_work_single+0xbb/0x140 ? _raw_spin_lock+0x5a/0x110 kasan_report+0xed/0x120 ? _raw_spin_lock+0x5a/0x110 kasan_check_range+0x2bd/0x2e0 _raw_spin_lock+0x5a/0x110 rose_heartbeat_expiry+0x39/0x370 ? rose_start_heartbeat+0xb0/0xb0 call_timer_fn+0x2d/0x1c0 ? rose_start_heartbeat+0xb0/0xb0 expire_timers+0x1f3/0x320 __run_timers+0x3ff/0x4d0 run_timer_softirq+0x41/0x80 __do_softirq+0x233/0x544 irq_exit_rcu+0x41/0xa0 sysvec_apic_timer_interrupt+0x8c/0xb0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1b/0x20 RIP: 0010:default_idle+0xb/0x10 RSP: 0018:ffffc9000012fea0 EFLAGS: 00000202 RAX: 000000000000bcae RBX: ffff888006660f00 RCX: 000000000000bcae RDX: 0000000000000001 RSI: ffffffff843a11c0 RDI: ffffffff843a1180 RBP: dffffc0000000000 R08: dffffc0000000000 R09: ffffed100da36d46 R10: dfffe9100da36d47 R11: ffffffff83cf0950 R12: 0000000000000000 R13: 1ffff11000ccc1e0 R14: ffffffff8542af28 R15: dffffc0000000000 ... Allocated by task 146: __kasan_kmalloc+0xc4/0xf0 sk_prot_alloc+0xdd/0x1a0 sk_alloc+0x2d/0x4e0 rose_create+0x7b/0x330 __sock_create+0x2dd/0x640 __sys_socket+0xc7/0x270 __x64_sys_socket+0x71/0x80 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 152: kasan_set_track+0x4c/0x70 kasan_set_free_info+0x1f/0x40 ____kasan_slab_free+0x124/0x190 kfree+0xd3/0x270 __sk_destruct+0x314/0x460 rose_release+0x2fa/0x3b0 sock_close+0xcb/0x230 __fput+0x2d9/0x650 task_work_run+0xd6/0x160 exit_to_user_mode_loop+0xc7/0xd0 exit_to_user_mode_prepare+0x4e/0x80 syscall_exit_to_user_mode+0x20/0x40 do_syscall_64+0x4f/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 This patch adds refcount of sock when we use functions such as rose_start_heartbeat() and so on to start timer, and decreases the refcount of sock when timer is finished or deleted by functions such as rose_stop_heartbeat() and so on. As a result, the UAF bugs could be mitigated. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Chuck Lever authored
commit a23dd544 upstream. Looks like there are still cases when "space_left - frag1bytes" can legitimately exceed PAGE_SIZE. Ensure that xdr->end always remains within the current encode buffer. Reported-by:
Bruce Fields <bfields@fieldses.org> Reported-by:
Zorro Lang <zlang@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216151 Fixes: 6c254bf3 ("SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit e4f74400 upstream. s390x appears to present two RNG interfaces: - a "TRNG" that gathers entropy using some hardware function; and - a "DRBG" that takes in a seed and expands it. Previously, the TRNG was wired up to arch_get_random_{long,int}(), but it was observed that this was being called really frequently, resulting in high overhead. So it was changed to be wired up to arch_get_random_ seed_{long,int}(), which was a reasonable decision. Later on, the DRBG was then wired up to arch_get_random_{long,int}(), with a complicated buffer filling thread, to control overhead and rate. Fortunately, none of the performance issues matter much now. The RNG always attempts to use arch_get_random_seed_{long,int}() first, which means a complicated implementation of arch_get_random_{long,int}() isn't really valuable or useful to have around. And it's only used when reseeding, which means it won't hit the high throughput complications that were faced before. So this commit returns to an earlier design of just calling the TRNG in arch_get_random_seed_{long,int}(), and returning false in arch_get_ random_{long,int}(). Part of what makes the simplification possible is that the RNG now seeds itself using the TRNG at bootup. But this only works if the TRNG is detected early in boot, before random_init() is called. So this commit also causes that check to happen in setup_arch(). Cc: stable@vger.kernel.org Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Ingo Franzki <ifranzki@linux.ibm.com> Cc: Juergen Christ <jchrist@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20220610222023.378448-1-Jason@zx2c4.com Reviewed-by:
Harald Freudenberger <freude@linux.ibm.com> Acked-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by:
-
Mikulas Patocka authored
commit 617b3658 upstream. There's a KASAN warning in raid5_add_disk when running the LVM testsuite. The warning happens in the test lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning by verifying that rdev->saved_raid_disk is within limits. Cc: stable@vger.kernel.org Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@kernel.org> Signed-off-by:
-
Heinz Mauelshagen authored
commit 332bd077 upstream. On dm-raid table load (using raid_ctr), dm-raid allocates an array rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks is defined by the number of raid metadata and image tupples passed into the target's constructor. In the case of RAID layout changes being requested, that number can be different from the current number of members for existing raid sets as defined in their superblocks. Example RAID layout changes include: - raid1 legs being added/removed - raid4/5/6/10 number of stripes changed (stripe reshaping) - takeover to higher raid level (e.g. raid5 -> raid6) When accessing array members, rs->raid_disks must be used in control loops instead of the potentially larger value in rs->md.raid_disks. Otherwise it will cause memory access beyond the end of the rs->devs array. Fix this by changing code that is prone to out-of-bounds access. Also fix validate_raid_redundancy() to validate all devices that are added. Also, use braces to help clean up raid_iterate_devices(). The out-of-bounds memory accesses was discovered using KASAN. This commit was verified to pass all LVM2 RAID tests (with KASAN enabled). Cc: stable@vger.kernel.org Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
-
Chris Ye authored
commit ef910200 upstream. nvdimm_clear_badblocks_region() validates badblock clearing requests against the span of the region, however it compares the inclusive badblock request range to the exclusive region range. Fix up the off-by-one error. Fixes: 23f49844 ("libnvdimm: rework region badblocks clearing") Cc: <stable@vger.kernel.org> Signed-off-by:
Chris Ye <chris.ye@intel.com> Reviewed-by:
Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/165404219489.2445897.9792886413715690399.stgit@dwillia2-xfh Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
- Jul 02, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220630133232.433955678@linuxfoundation.org Tested-by:
-
Liu Shixin authored
After patch ddbd89de ("swiotlb: fix info leak with DMA_FROM_DEVICE"), swiotlb_bounce will be called in swiotlb_tbl_map_single unconditionally. This requires that the physical address must be valid, which is not always true on stable-4.19 or earlier version. On stable-4.19, swiotlb_alloc_buffer will call swiotlb_tbl_map_single with orig_addr equal to zero, which cause such a panic: Unable to handle kernel paging request at virtual address ffffb77a40000000 ... pc : __memcpy+0x100/0x180 lr : swiotlb_bounce+0x74/0x88 ... Call trace: __memcpy+0x100/0x180 swiotlb_tbl_map_single+0x2c8/0x338 swiotlb_alloc+0xb4/0x198 __dma_alloc+0x84/0x1d8 ... On stable-4.9 and stable-4.14, swiotlb_alloc_coherent wille call map_single with orig_addr equal to zero, which can cause same panic. Fix this by skipping swiotlb_bounce when orig_addr is zero. Fixes: ddbd89de ("swiotlb: fix info leak with DMA_FROM_DEVICE") Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Signed-off-by:
-
Naveen N. Rao authored
commit 3e35142e upstream. Since commit d1bcae833b32f1 ("ELF: Don't generate unused section symbols") [1], binutils (v2.36+) started dropping section symbols that it thought were unused. This isn't an issue in general, but with kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a separate .text.unlikely section and the section symbol ".text.unlikely" is being dropped. Due to this, recordmcount is unable to find a non-weak symbol in .text.unlikely to generate a relocation record against. Address this by dropping the weak attribute from these functions. Instead, follow the existing pattern of having architectures #define the name of the function they want to override in their headers. [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1 [akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h] Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Hsin-Yi Wang authored
commit dd753d96 upstream. Commit 428826f5 ("fdt: add support for rng-seed") moves of_fdt_crc32 from early_init_dt_verify() to early_init_dt_scan() since early_init_dt_scan_chosen() may modify fdt to erase rng-seed. However, arm and some other arch won't call early_init_dt_scan(), they call early_init_dt_verify() then early_init_dt_scan_nodes(). Restore of_fdt_crc32 to early_init_dt_verify() then update it in early_init_dt_scan_chosen() if fdt if updated. Fixes: 428826f5 ("fdt: add support for rng-seed") Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Tested-by:
Will Deacon <will@kernel.org> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Masahiro Yamada authored
commit dbac14a5 upstream. EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because none of the in-tree call-sites (arch/arm/xen/enlighten.c, arch/x86/xen/grant-table.c) is compiled as modular. Fixes: 243848fc ("xen/grant-table: Move xlated_setup_gnttab_pages to common place") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
-
