- Jul 07, 2022
-
-
Eric Dumazet authored
commit ab84db25 upstream. syzbot has two reports involving the same root cause. bond_alb_initialize() must not set bond->alb_info.rlb_enabled if a memory allocation error is detected. Report 1: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 0 PID: 12276 Comm: kworker/u4:10 Not tainted 5.19.0-rc3-syzkaller-00132-g3b89b511ea0c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:rlb_clear_slave+0x10e/0x690 drivers/net/bonding/bond_alb.c:393 Code: 8e fc 83 fb ff 0f 84 74 02 00 00 e8 cc 2a 8e fc 48 8b 44 24 08 89 dd 48 c1 e5 06 4c 8d 34 28 49 8d 7e 14 48 89 f8 48 c1 e8 03 <42> 0f b6 14 20 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RSP: 0018:ffffc90018a8f678 EFLAGS: 00010203 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88803375bb00 RSI: ffffffff84ec4ac4 RDI: 0000000000000014 RBP: 0000000000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff8880ac889000 R14: 0000000000000000 R15: ffff88815a668c80 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005597077e10b0 CR3: 0000000026668000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bond_alb_deinit_slave+0x43c/0x6b0 drivers/net/bonding/bond_alb.c:1663 __bond_release_one.cold+0x383/0xd53 drivers/net/bonding/bond_main.c:2370 bond_slave_netdev_event drivers/net/bonding/bond_main.c:3778 [inline] bond_netdev_event+0x993/0xad0 drivers/net/bonding/bond_main.c:3889 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] unregister_netdevice_many+0x948/0x18b0 net/core/dev.c:10839 default_device_exit_batch+0x449/0x590 net/core/dev.c:11333 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> Report 2: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 5206 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-12108-g58f9d52ff689 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rlb_req_update_slave_clients+0x109/0x2f0 drivers/net/bonding/bond_alb.c:502 Code: 5d 18 8f fc 41 80 3e 00 0f 85 a5 01 00 00 89 d8 48 c1 e0 06 49 03 84 24 68 01 00 00 48 8d 78 30 49 89 c7 48 89 fa 48 c1 ea 03 <80> 3c 2a 00 0f 85 98 01 00 00 4d 39 6f 30 75 83 e8 22 18 8f fc 49 RSP: 0018:ffffc9000300ee80 EFLAGS: 00010206 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90016c11000 RDX: 0000000000000006 RSI: ffffffff84eb6bf3 RDI: 0000000000000030 RBP: dffffc0000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: ffff888027c80c80 R13: ffff88807d7ff800 R14: ffffed1004f901bd R15: 0000000000000000 FS: 00007f6f46c58700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 00000000516cc000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> alb_fasten_mac_swap+0x886/0xa80 drivers/net/bonding/bond_alb.c:1070 bond_alb_handle_active_change+0x624/0x1050 drivers/net/bonding/bond_alb.c:1765 bond_change_active_slave+0xfa1/0x29b0 drivers/net/bonding/bond_main.c:1173 bond_select_active_slave+0x23f/0xa50 drivers/net/bonding/bond_main.c:1253 bond_enslave+0x3b34/0x53b0 drivers/net/bonding/bond_main.c:2159 do_set_master+0x1c8/0x220 net/core/rtnetlink.c:2577 rtnl_newlink_create net/core/rtnetlink.c:3380 [inline] __rtnl_newlink+0x13ac/0x17e0 net/core/rtnetlink.c:3580 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593 rtnetlink_rcv_msg+0x43a/0xc90 net/core/rtnetlink.c:6089 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f6f45a89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6f46c58168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6f45b9c030 RCX: 00007f6f45a89109 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000006 RBP: 00007f6f45ae308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffed99029af R14: 00007f6f46c58300 R15: 0000000000022000 </TASK> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20220627102813.126264-1-edumazet@google.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pablo Neira Ayuso authored
commit 05907f10 upstream. This patch fixes a race condition. nft_rhash_update() might fail for two reasons: - Element already exists in the hashtable. - Another packet won race to insert an entry in the hashtable. In both cases, new() has already bumped the counter via atomic_add_unless(), therefore, decrement the set element counter. Fixes: 22fe54d5 ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason Wang authored
commit 11a37eb6 upstream. We currently depend on probe() calling virtio_device_ready() - which happens after netdev registration. Since ndo_open() can be called immediately after register_netdev, this means there exists a race between ndo_open() and virtio_device_ready(): the driver may start to use the device (e.g. TX) before DRIVER_OK which violates the spec. Fix this by switching to use register_netdevice() and protect the virtio_device_ready() with rtnl_lock() to make sure ndo_open() can only be called after virtio_device_ready(). Fixes: 0d2e1a29 ("caif_virtio: Introduce caif over virtio") Signed-off-by:
Jason Wang <jasowang@redhat.com> Message-Id: <20220620051115.3142-3-jasowang@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason A. Donenfeld authored
commit f3eac426 upstream. The platform's RNG must be available before random_init() in order to be useful for initial seeding, which in turn means that it needs to be called from setup_arch(), rather than from an init call. Complicating things, however, is that POWER8 systems need some per-cpu state and kmalloc, which isn't available at this stage. So we split things up into an early phase and a later opportunistic phase. This commit also removes some noisy log messages that don't add much. Fixes: a4da0d50 ("powerpc: Implement arch_get_random_long/int() for powernv") Cc: stable@vger.kernel.org # v3.13+ Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Add of_node_put(), use pnv naming, minor change log editing] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220621140849.127227-1-Jason@zx2c4.com Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit e65af540 upstream. usbnet provides some helper functions that are also used in the context of reset() operations. During a reset the other drivers on a device are unable to operate. As that can be block drivers, a driver for another interface cannot use paging in its memory allocations without risking a deadlock. Use GFP_NOIO in the helpers. Fixes: 877bd862 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220628093517.7469-1-oneukum@suse.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit 6c22fce0 upstream. Coverity reports: ** CID 751368: Null pointer dereferences (FORWARD_NULL) /drivers/net/usb/usbnet.c: 1925 in __usbnet_read_cmd() ________________________________________________________________________________________________________ *** CID 751368: Null pointer dereferences (FORWARD_NULL) /drivers/net/usb/usbnet.c: 1925 in __usbnet_read_cmd() 1919 EXPORT_SYMBOL(usbnet_link_change); 1920 1921 /*-------------------------------------------------------------------------*/ 1922 static int __usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype, 1923 u16 value, u16 index, void *data, u16 size) 1924 { >>> CID 751368: Null pointer dereferences (FORWARD_NULL) >>> Assigning: "buf" = "NULL". 1925 void *buf = NULL; 1926 int err = -ENOMEM; 1927 1928 netdev_dbg(dev->net, "usbnet_read_cmd cmd=0x%02x reqtype=%02x" 1929 " value=0x%04x index=0x%04x size=%d\n", 1930 cmd, reqtype, value, index, size); ** CID 751370: Null pointer dereferences (FORWARD_NULL) /drivers/net/usb/usbnet.c: 1952 in __usbnet_write_cmd() ________________________________________________________________________________________________________ *** CID 751370: Null pointer dereferences (FORWARD_NULL) /drivers/net/usb/usbnet.c: 1952 in __usbnet_write_cmd() 1946 } 1947 1948 static int __usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype, 1949 u16 value, u16 index, const void *data, 1950 u16 size) 1951 { >>> CID 751370: Null pointer dereferences (FORWARD_NULL) >>> Assigning: "buf" = "NULL". 1952 void *buf = NULL; 1953 int err = -ENOMEM; 1954 1955 netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x" 1956 " value=0x%04x index=0x%04x size=%d\n", 1957 cmd, reqtype, value, index, size); ** CID 1325026: Null pointer dereferences (FORWARD_NULL) /drivers/net/usb/ch9200.c: 143 in control_write() It is valid to offer commands without a buffer, but then you need a size of zero. This should actually be checked. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jose Alonso authored
commit f8ebb3ac upstream. This patch corrects packet receiving in ax88179_rx_fixup. - problem observed: ifconfig shows allways a lot of 'RX Errors' while packets are received normally. This occurs because ax88179_rx_fixup does not recognise properly the usb urb received. The packets are normally processed and at the end, the code exits with 'return 0', generating RX Errors. (pkt_cnt==-2 and ptk_hdr over field rx_hdr trying to identify another packet there) This is a usb urb received by "tcpdump -i usbmon2 -X" on a little-endian CPU: 0x0000: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ^ packet 1 start (pkt_len = 0x05ec) ^^^^ IP alignment pseudo header ^ ethernet packet start last byte ethernet packet v padding (8-bytes aligned) vvvv vvvv 0x05e0: c92d d444 1420 8a69 83dd 272f e82b 9811 0x05f0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... ^ packet 2 0x0be0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... 0x1130: 9d41 9171 8a38 0ec5 eeee f8e3 3b19 87a0 ... 0x1720: 8cfc 15ff 5e4c e85c eeee f8e3 3b19 87a0 ... 0x1d10: ecfa 2a3a 19ab c78c eeee f8e3 3b19 87a0 ... 0x2070: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... ^ packet 7 0x2120: 7c88 4ca5 5c57 7dcc 0d34 7577 f778 7e0a 0x2130: f032 e093 7489 0740 3008 ec05 0000 0080 ====1==== ====2==== hdr_off ^ pkt_len = 0x05ec ^^^^ AX_RXHDR_*=0x00830 ^^^^ ^ pkt_len = 0 ^^^^ AX_RXHDR_DROP_ERR=0x80000000 ^^^^ ^ 0x2140: 3008 ec05 0000 0080 3008 5805 0000 0080 0x2150: 3008 ec05 0000 0080 3008 ec05 0000 0080 0x2160: 3008 5803 0000 0080 3008 c800 0000 0080 ===11==== ===12==== ===13==== ===14==== 0x2170: 0000 0000 0e00 3821 ^^^^ ^^^^ rx_hdr ^^^^ pkt_cnt=14 ^^^^ hdr_off=0x2138 ^^^^ ^^^^ padding The dump shows that pkt_cnt is the number of entrys in the per-packet metadata. It is "2 * packet count". Each packet have two entrys. The first have a valid value (pkt_len and AX_RXHDR_*) and the second have a dummy-header 0x80000000 (pkt_len=0 with AX_RXHDR_DROP_ERR). Why exists dummy-header for each packet?!? My guess is that this was done probably to align the entry for each packet to 64-bits and maintain compatibility with old firmware. There is also a padding (0x00000000) before the rx_hdr to align the end of rx_hdr to 64-bit. Note that packets have a alignment of 64-bits (8-bytes). This patch assumes that the dummy-header and the last padding are optional. So it preserves semantics and recognises the same valid packets as the current code. This patch was made using only the dumpfile information and tested with only one device: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet Fixes: 57bc3d3a ("net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup") Fixes: e2ca90c2 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by:
Jose Alonso <joalonsof@gmail.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/d6970bb04bf67598af4d316eaeb1792040b18cfd.camel@gmail.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Duoming Zhou authored
commit 9cc02ede upstream. There are UAF bugs in rose_heartbeat_expiry(), rose_timer_expiry() and rose_idletimer_expiry(). The root cause is that del_timer() could not stop the timer handler that is running and the refcount of sock is not managed properly. One of the UAF bugs is shown below: (thread 1) | (thread 2) | rose_bind | rose_connect | rose_start_heartbeat rose_release | (wait a time) case ROSE_STATE_0 | rose_destroy_socket | rose_heartbeat_expiry rose_stop_heartbeat | sock_put(sk) | ... sock_put(sk) // FREE | | bh_lock_sock(sk) // USE The sock is deallocated by sock_put() in rose_release() and then used by bh_lock_sock() in rose_heartbeat_expiry(). Although rose_destroy_socket() calls rose_stop_heartbeat(), it could not stop the timer that is running. The KASAN report triggered by POC is shown below: BUG: KASAN: use-after-free in _raw_spin_lock+0x5a/0x110 Write of size 4 at addr ffff88800ae59098 by task swapper/3/0 ... Call Trace: <IRQ> dump_stack_lvl+0xbf/0xee print_address_description+0x7b/0x440 print_report+0x101/0x230 ? irq_work_single+0xbb/0x140 ? _raw_spin_lock+0x5a/0x110 kasan_report+0xed/0x120 ? _raw_spin_lock+0x5a/0x110 kasan_check_range+0x2bd/0x2e0 _raw_spin_lock+0x5a/0x110 rose_heartbeat_expiry+0x39/0x370 ? rose_start_heartbeat+0xb0/0xb0 call_timer_fn+0x2d/0x1c0 ? rose_start_heartbeat+0xb0/0xb0 expire_timers+0x1f3/0x320 __run_timers+0x3ff/0x4d0 run_timer_softirq+0x41/0x80 __do_softirq+0x233/0x544 irq_exit_rcu+0x41/0xa0 sysvec_apic_timer_interrupt+0x8c/0xb0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1b/0x20 RIP: 0010:default_idle+0xb/0x10 RSP: 0018:ffffc9000012fea0 EFLAGS: 00000202 RAX: 000000000000bcae RBX: ffff888006660f00 RCX: 000000000000bcae RDX: 0000000000000001 RSI: ffffffff843a11c0 RDI: ffffffff843a1180 RBP: dffffc0000000000 R08: dffffc0000000000 R09: ffffed100da36d46 R10: dfffe9100da36d47 R11: ffffffff83cf0950 R12: 0000000000000000 R13: 1ffff11000ccc1e0 R14: ffffffff8542af28 R15: dffffc0000000000 ... Allocated by task 146: __kasan_kmalloc+0xc4/0xf0 sk_prot_alloc+0xdd/0x1a0 sk_alloc+0x2d/0x4e0 rose_create+0x7b/0x330 __sock_create+0x2dd/0x640 __sys_socket+0xc7/0x270 __x64_sys_socket+0x71/0x80 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 152: kasan_set_track+0x4c/0x70 kasan_set_free_info+0x1f/0x40 ____kasan_slab_free+0x124/0x190 kfree+0xd3/0x270 __sk_destruct+0x314/0x460 rose_release+0x2fa/0x3b0 sock_close+0xcb/0x230 __fput+0x2d9/0x650 task_work_run+0xd6/0x160 exit_to_user_mode_loop+0xc7/0xd0 exit_to_user_mode_prepare+0x4e/0x80 syscall_exit_to_user_mode+0x20/0x40 do_syscall_64+0x4f/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 This patch adds refcount of sock when we use functions such as rose_start_heartbeat() and so on to start timer, and decreases the refcount of sock when timer is finished or deleted by functions such as rose_stop_heartbeat() and so on. As a result, the UAF bugs could be mitigated. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Tested-by:
Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220629002640.5693-1-duoming@zju.edu.cn Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chuck Lever authored
commit a23dd544 upstream. Looks like there are still cases when "space_left - frag1bytes" can legitimately exceed PAGE_SIZE. Ensure that xdr->end always remains within the current encode buffer. Reported-by:
Bruce Fields <bfields@fieldses.org> Reported-by:
Zorro Lang <zlang@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216151 Fixes: 6c254bf3 ("SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikulas Patocka authored
commit 617b3658 upstream. There's a KASAN warning in raid5_add_disk when running the LVM testsuite. The warning happens in the test lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning by verifying that rdev->saved_raid_disk is within limits. Cc: stable@vger.kernel.org Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Jul 02, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220630133231.200642128@linuxfoundation.org Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Pavel Machek (CIP) <pavel@denx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Liu Shixin authored
After patch ddbd89de ("swiotlb: fix info leak with DMA_FROM_DEVICE"), swiotlb_bounce will be called in swiotlb_tbl_map_single unconditionally. This requires that the physical address must be valid, which is not always true on stable-4.19 or earlier version. On stable-4.19, swiotlb_alloc_buffer will call swiotlb_tbl_map_single with orig_addr equal to zero, which cause such a panic: Unable to handle kernel paging request at virtual address ffffb77a40000000 ... pc : __memcpy+0x100/0x180 lr : swiotlb_bounce+0x74/0x88 ... Call trace: __memcpy+0x100/0x180 swiotlb_tbl_map_single+0x2c8/0x338 swiotlb_alloc+0xb4/0x198 __dma_alloc+0x84/0x1d8 ... On stable-4.9 and stable-4.14, swiotlb_alloc_coherent wille call map_single with orig_addr equal to zero, which can cause same panic. Fix this by skipping swiotlb_bounce when orig_addr is zero. Fixes: ddbd89de ("swiotlb: fix info leak with DMA_FROM_DEVICE") Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Naveen N. Rao authored
commit 3e35142e upstream. Since commit d1bcae833b32f1 ("ELF: Don't generate unused section symbols") [1], binutils (v2.36+) started dropping section symbols that it thought were unused. This isn't an issue in general, but with kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a separate .text.unlikely section and the section symbol ".text.unlikely" is being dropped. Due to this, recordmcount is unable to find a non-weak symbol in .text.unlikely to generate a relocation record against. Address this by dropping the weak attribute from these functions. Instead, follow the existing pattern of having architectures #define the name of the function they want to override in their headers. [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1 [akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h] Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hsin-Yi Wang authored
commit dd753d96 upstream. Commit 428826f5 ("fdt: add support for rng-seed") moves of_fdt_crc32 from early_init_dt_verify() to early_init_dt_scan() since early_init_dt_scan_chosen() may modify fdt to erase rng-seed. However, arm and some other arch won't call early_init_dt_scan(), they call early_init_dt_verify() then early_init_dt_scan_nodes(). Restore of_fdt_crc32 to early_init_dt_verify() then update it in early_init_dt_scan_chosen() if fdt if updated. Fixes: 428826f5 ("fdt: add support for rng-seed") Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Tested-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masahiro Yamada authored
commit dbac14a5 upstream. EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because none of the in-tree call-sites (arch/arm/xen/enlighten.c, arch/x86/xen/grant-table.c) is compiled as modular. Fixes: 243848fc ("xen/grant-table: Move xlated_setup_gnttab_pages to common place") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Acked-by:
Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20220606045920.4161881-1-masahiroy@kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christoph Hellwig authored
commit bf22c9ec upstream. drm_fb_helper_modinit has a lot of boilerplate for what is not very simple functionality. Just open code it in the only caller using IS_ENABLED and IS_MODULE, and skip the find_module check as a request_module is harmless if the module is already loaded (and not other caller has this find_module check either). Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jessica Yu <jeyu@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason A. Donenfeld authored
commit e561e472 upstream. The platform's RNG must be available before random_init() in order to be useful for initial seeding, which in turn means that it needs to be called from setup_arch(), rather than from an init call. Fortunately, each platform already has a setup_arch function pointer, which means it's easy to wire this up. This commit also removes some noisy log messages that don't add much. Fixes: a489043f ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM") Cc: stable@vger.kernel.org # v3.13+ Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220611151015.548325-4-Jason@zx2c4.com Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masahiro Yamada authored
commit 28438794 upstream. Since commit f02e8a65 ("module: Sort exported symbols"), EXPORT_SYMBOL* is placed in the individual section ___ksymtab(_gpl)+<sym> (3 leading underscores instead of 2). Since then, modpost cannot detect the bad combination of EXPORT_SYMBOL and __init/__exit. Fix the .fromsec field. Fixes: f02e8a65 ("module: Sort exported symbols") Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaoqian Lin authored
commit 1ba904b6 upstream. of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 415f5914 ("ARM: cns3xxx: initial DT support") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Acked-by:
Krzysztof Halasa <khalasa@piap.pl> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaoqian Lin authored
commit 7c7ff68d upstream. of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 1d22924e ("ARM: Add platform support for LSI AXM55xx SoC") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220601090548.47616-1-linmq006@gmail.com ' Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaoqian Lin authored
commit c4c79525 upstream. of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() checks null pointer. Fixes: fce9e5bb ("ARM: EXYNOS: Add support for mapping PMU base address via DT") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220523145513.12341-1-linmq006@gmail.com Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lucas Stach authored
commit 93a8ba2a upstream. Contrary to what was believed at the time, the ramp delay of 150us is not plenty for the PU LDO with the default step time of 512 pulses of the 24MHz clock. Measurements have shown that after enabling the LDO the voltage on VDDPU_CAP jumps to ~750mV in the first step and after that the regulator executes the normal ramp up as defined by the step size control. This means it takes the regulator between 360us and 370us to ramp up to the nominal 1.15V voltage for this power domain. With the old setting of the ramp delay the power up of the PU GPC domain would happen in the middle of the regulator ramp with the voltage being at around 900mV. Apparently this was enough for most units to properly power up the peripherals in the domain and execute the reset. Some units however, fail to power up properly, especially when the chip is at a low temperature. In that case any access to the GPU registers would yield an incorrect result with no way to recover from this situation. Change the ramp delay to 380us to cover the measured ramp up time with a bit of additional slack. Fixes: 40130d32 ("ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay") Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Naveen N. Rao authored
commit ec6d0dde upstream. On execve[at], we are zero'ing out most of the thread register state including gpr[0], which contains the syscall number. Due to this, we fail to trigger the syscall exit tracepoint properly. Fix this by retaining gpr[0] in the thread register state. Before this patch: # tail /sys/kernel/debug/tracing/trace cat-123 [000] ..... 61.449351: sys_execve(filename: 7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8) cat-124 [000] ..... 62.428481: sys_execve(filename: 7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8) echo-125 [000] ..... 65.813702: sys_execve(filename: 7fffa6b23378, argv: 7fffa6b233a0, envp: 7fffa6b233b0) echo-125 [000] ..... 65.822214: sys_execveat(fd: 0, filename: 1009ac48, argv: 7ffff65d0c98, envp: 7ffff65d0ca8, flags: 0) After this patch: # tail /sys/kernel/debug/tracing/trace cat-127 [000] ..... 100.416262: sys_execve(filename: 7fffa41b3448, argv: 7fffa41b33e0, envp: 7fffa41b33f8) cat-127 [000] ..... 100.418203: sys_execve -> 0x0 echo-128 [000] ..... 103.873968: sys_execve(filename: 7fffa41b3378, argv: 7fffa41b33a0, envp: 7fffa41b33b0) echo-128 [000] ..... 103.875102: sys_execve -> 0x0 echo-128 [000] ..... 103.882097: sys_execveat(fd: 0, filename: 1009ac48, argv: 7fffd10d2148, envp: 7fffd10d2158, flags: 0) echo-128 [000] ..... 103.883225: sys_execveat -> 0x0 Cc: stable@vger.kernel.org Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by:
Sumit Dubey2 <Sumit.Dubey2@ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220609103328.41306-1-naveen.n.rao@linux.vnet.ibm.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Liang He authored
commit a0117dc9 upstream. In calibrate_ccount(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Cc: stable@vger.kernel.org Signed-off-by:
Liang He <windhl@126.com> Message-Id: <20220617124432.4049006-1-windhl@126.com> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Liang He authored
commit 173940b3 upstream. In machine_setup(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Cc: stable@vger.kernel.org Signed-off-by:
Liang He <windhl@126.com> Message-Id: <20220617115323.4046905-1-windhl@126.com> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vincent Whitchurch authored
commit 78601726 upstream. Ensure that the irq_work has completed before the trigger is freed. ================================================================== BUG: KASAN: use-after-free in irq_work_run_list Read of size 8 at addr 0000000064702248 by task python3/25 Call Trace: irq_work_run_list irq_work_tick update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt Allocated by task 25: kmem_cache_alloc_trace iio_sysfs_trig_add dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write Freed by task 25: kfree iio_sysfs_trig_remove dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write ================================================================== Fixes: f38bc926 ("staging:iio:sysfs-trigger: Use irq_work to properly active trigger") Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20220519091925.1053897-1-vincent.whitchurch@axis.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Haibo Chen authored
commit bf745142 upstream. On fxls8471, after set the reset bit, the device will reset immediately, will not give ACK. So ignore the return value of this reset operation, let the following code logic to check whether the reset operation works. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Fixes: ecabae71 ("iio: mma8452: Initialise before activating") Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/1655292718-14287-1-git-send-email-haibo.chen@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Rokosov authored
commit e5f3205b upstream. IIO trigger interface function iio_trigger_get() should be called after iio_trigger_register() (or its devm analogue) strictly, because of iio_trigger_get() acquires module refcnt based on the trigger->owner pointer, which is initialized inside iio_trigger_register() to THIS_MODULE. If this call order is wrong, the next iio_trigger_put() (from sysfs callback or "delete module" path) will dereference "default" module refcnt, which is incorrect behaviour. Fixes: 0668a4e4 ("iio: accel: bma180: Fix indio_dev->trig assignment") Signed-off-by:
Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220524181150.9240-2-ddrokosov@sberdevices.ru Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xu Yang authored
commit b24346a2 upstream. The complete() function may be called even though request is not completed. In this case, it's necessary to check request status so as not to set device address wrongly. Fixes: 10775eb1 ("usb: chipidea: udc: update gadget states according to ch9") cc: <stable@vger.kernel.org> Signed-off-by:
Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20220623030242.41796-1-xu.yang_2@nxp.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Baruch Siach authored
[ Upstream commit f1a633b1 ] The documentation missed the "in_" prefix for this IIO_SHARED_BY_DIR entry. Fixes: bf04c1a3 ("iio: adc: vf610: implement configurable conversion modes") Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Acked-by:
Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/560dc93fafe5ef7e9a409885fd20b6beac3973d8.1653900626.git.baruch@tkos.co.il Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kai-Heng Feng authored
[ Upstream commit 4e0effd9 ] Intel I210 on some Intel Alder Lake platforms can only achieve ~750Mbps Tx speed via iperf. The RR2DCDELAY shows around 0x2xxx DMA delay, which will be significantly lower when 1) ASPM is disabled or 2) SoC package c-state stays above PC3. When the RR2DCDELAY is around 0x1xxx the Tx speed can reach to ~950Mbps. According to the I210 datasheet "8.26.1 PCIe Misc. Register - PCIEMISC", "DMA Idle Indication" doesn't seem to tie to DMA coalesce anymore, so set it to 1b for "DMA is considered idle when there is no Rx or Tx AND when there are no TLPs indicating that CPU is active detected on the PCIe link (such as the host executes CSR or Configuration register read or write operation)" and performing Tx should also fall under "active CPU on PCIe link" case. In addition to that, commit b6e0c419 ("igb: Move DMA Coalescing init code to separate function.") seems to wrongly changed from enabling E1000_PCIEMISC_LX_DECISION to disabling it, also fix that. Fixes: b6e0c419 ("igb: Move DMA Coalescing init code to separate function.") Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220621221056.604304-1-anthony.l.nguyen@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
huhai authored
[ Upstream commit c81aba8f ] commit 979934da ("[PATCH] mips: update IRQ handling for vr41xx") added a function irq_dispatch, and it'll increase irq_err_count when the get_irq callback returns a negative value, but increase irq_err_count in get_irq was not removed. And also, modpost complains once gpio-vr41xx drivers become modules. ERROR: modpost: "irq_err_count" [drivers/gpio/gpio-vr41xx.ko] undefined! So it would be a good idea to remove repetitive increase irq_err_count in get_irq callback. Fixes: 27fdd325 ("MIPS: Update VR41xx GPIO driver to use gpiolib") Fixes: 979934da ("[PATCH] mips: update IRQ handling for vr41xx") Reported-by:
k2ci <kernel-bot@kylinos.cn> Signed-off-by:
huhai <huhai@kylinos.cn> Signed-off-by:
Genjian Zhang <zhanggenjian@kylinos.cn> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Julien Grall authored
[ Upstream commit ecb6237f ] 1 << 31 is undefined. So switch to 1U << 31. Fixes: 5ead97c8 ("xen: Core Xen implementation") Signed-off-by:
Julien Grall <jgrall@amazon.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220617103037.57828-1-julien@xen.org Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jay Vosburgh authored
[ Upstream commit 7a9214f3 ] The bonding ARP monitor fails to decrement send_peer_notif, the number of peer notifications (gratuitous ARP or ND) to be sent. This results in a continuous series of notifications. Correct this by decrementing the counter for each notification. Reported-by:
Jonathan Toppins <jtoppins@redhat.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: b0929915 ("bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor") Link: https://lore.kernel.org/netdev/b2fd4147-8f50-bebd-963a-1a3e8d1d9715@redhat.com/ Tested-by:
Jonathan Toppins <jtoppins@redhat.com> Reviewed-by:
Jonathan Toppins <jtoppins@redhat.com> Link: https://lore.kernel.org/r/9400.1655407960@famine Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Carlo Lobrano authored
commit 342fc0c3 upstream. Add support for the following Telit LE910Cx composition: 0x1250: rmnet, tty, tty, tty, tty Reviewed-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
Carlo Lobrano <c.lobrano@gmail.com> Link: https://lore.kernel.org/r/20220614075623.2392607-1-c.lobrano@gmail.com Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason A. Donenfeld authored
commit c01d4d0a upstream. random.c ratelimits how much it warns about uninitialized urandom reads using __ratelimit(). When the RNG is finally initialized, it prints the number of missed messages due to ratelimiting. It has been this way since that functionality was introduced back in 2018. Recently, cc1e127b ("random: remove ratelimiting for in-kernel unseeded randomness") put a bit more stress on the urandom ratelimiting, which teased out a bug in the implementation. Specifically, when under pressure, __ratelimit() will print its own message and reset the count back to 0, making the final message at the end less useful. Secondly, it does so as a pr_warn(), which apparently is undesirable for people's CI. Fortunately, __ratelimit() has the RATELIMIT_MSG_ON_RELEASE flag exactly for this purpose, so we set the flag. Fixes: 4e00b339 ("random: rate limit unseeded randomness warnings") Cc: stable@vger.kernel.org Reported-by:
Jon Hunter <jonathanh@nvidia.com> Reported-by:
Ron Economos <re@w6rz.net> Tested-by:
Ron Economos <re@w6rz.net> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikos Tsironis authored
commit 9ae6e8b1 upstream. During postsuspend dm-era does the following: 1. Archives the current era 2. Commits the metadata, as part of the RPC call for archiving the current era 3. Stops the worker Until the worker stops, it might write to the metadata again. Moreover, these writes are not flushed to disk immediately, but are cached by the dm-bufio client, which writes them back asynchronously. As a result, the committed metadata of a suspended dm-era device might not be consistent with the in-core metadata. In some cases, this can result in the corruption of the on-disk metadata. Suppose the following sequence of events: 1. Load a new table, e.g. a snapshot-origin table, to a device with a dm-era table 2. Suspend the device 3. dm-era commits its metadata, but the worker does a few more metadata writes until it stops, as part of digesting an archived writeset 4. These writes are cached by the dm-bufio client 5. Load the dm-era table to another device. 6. The new instance of the dm-era target loads the committed, on-disk metadata, which don't include the extra writes done by the worker after the metadata commit. 7. Resume the new device 8. The new dm-era target instance starts using the metadata 9. Resume the original device 10. The destructor of the old dm-era target instance is called and destroys the dm-bufio client, which results in flushing the cached writes to disk 11. These writes might overwrite the writes done by the new dm-era instance, hence corrupting its metadata. Fix this by committing the metadata after the worker stops running. stop_worker uses flush_workqueue to flush the current work. However, the work item may re-queue itself and flush_workqueue doesn't wait for re-queued works to finish. This could result in the worker changing the metadata after they have been committed, or writing to the metadata concurrently with the commit in the postsuspend thread. Use drain_workqueue instead, which waits until the work and all re-queued works finish. Fixes: eec40579 ("dm: add era target") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by:
Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by:
Mike Snitzer <snitzer@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Edward Wu authored
commit 540a92bf upstream. Add flags value to check the result of ata completion Fixes: 255c03d1 ("libata: Add tracepoints") Cc: stable@vger.kernel.org Signed-off-by:
Edward Wu <edwardwu@realtek.com> Signed-off-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason A. Donenfeld authored
commit 534d2eaf upstream. It used to be that mix_interrupt_randomness() would credit 1 bit each time it ran, and so add_interrupt_randomness() would schedule mix() to run every 64 interrupts, a fairly arbitrary number, but nonetheless considered to be a decent enough conservative estimate. Since e3e33fc2 ("random: do not use input pool from hard IRQs"), mix() is now able to credit multiple bits, depending on the number of calls to add(). This was done for reasons separate from this commit, but it has the nice side effect of enabling this patch to schedule mix() less often. Currently the rules are: a) Credit 1 bit for every 64 calls to add(). b) Schedule mix() once a second that add() is called. c) Schedule mix() once every 64 calls to add(). Rules (a) and (c) no longer need to be coupled. It's still important to have _some_ value in (c), so that we don't "over-saturate" the fast pool, but the once per second we get from rule (b) is a plenty enough baseline. So, by increasing the 64 in rule (c) to something larger, we avoid calling queue_work_on() as frequently during irq storms. This commit changes that 64 in rule (c) to be 1024, which means we schedule mix() 16 times less often. And it does *not* need to change the 64 in rule (a). Fixes: 58340f8e ("random: defer fast pool mixing to worker") Cc: stable@vger.kernel.org Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Slaby authored
commit ff2047fb upstream. Drop support for these ioctls: * PIO_FONT, PIO_FONTX * GIO_FONT, GIO_FONTX * PIO_FONTRESET As was demonstrated by commit 90bfdeef (tty: make FONTX ioctl use the tty pointer they were actually passed), these ioctls are not used from userspace, as: 1) they used to be broken (set up font on current console, not the open one) and racy (before the commit above) 2) KDFONTOP ioctl is used for years instead Note that PIO_FONTRESET is defunct on most systems as VGA_CONSOLE is set on them for ages. That turns on BROKEN_GRAPHICS_PROGRAMS which makes PIO_FONTRESET just return an error. We are removing KD_FONT_FLAG_OLD here as it was used only by these removed ioctls. kd.h header exists both in kernel and uapi headers, so we can remove the kernel one completely. Everyone includeing kd.h will now automatically get the uapi one. There are now unused definitions of the ioctl numbers and "struct consolefontdesc" in kd.h, but as it is a uapi header, I am not touching these. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210105120239.28031-8-jslaby@suse.cz Cc: guodaxing <guodaxing@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-