[ Upstream commit de8b6e1c ]

Return IRQ_NONE from the interrupt handler when no interrupt was
detected. Because an empty interrupt will cause a null pointer error:

    Unable to handle kernel NULL pointer dereference at virtual
  address 0000000000000008
    Call trace:
        complete+0x54/0x100
        hisi_sfc_v3xx_isr+0x2c/0x40 [spi_hisi_sfc_v3xx]
        __handle_irq_event_percpu+0x64/0x1e0
        handle_irq_event+0x7c/0x1cc

Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Link: https://msgid.link/r/20240123071149.917678-1-liudingyuan@huawei.com


Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e421946b ]

The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of pixclock,
it may cause divide-by-zero error.

In sisfb_check_var(), var->pixclock is used as a divisor to caculate
drate before it is checked against zero. Fix this by checking it
at the beginning.

This is similar to CVE-2022-3061 in i740fb which was fixed by
commit 15cf0b82.

Signed-off-by: Fullway Wang <fullwaywang@outlook.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 04e5eac8 ]

The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of pixclock,
it may cause divide-by-zero error.

Although pixclock is checked in savagefb_decode_var(), but it is not
checked properly in savagefb_probe(). Fix this by checking whether
pixclock is zero in the function savagefb_check_var() before
info->var.pixclock is used as the divisor.

This is similar to CVE-2022-3061 in i740fb which was fixed by
commit 15cf0b82.

Signed-off-by: Fullway Wang <fullwaywang@outlook.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bcbc84af ]

fast-xmit must only be enabled after the sta has been uploaded to the driver,
otherwise it could end up passing the not-yet-uploaded sta via drv_tx calls
to the driver, leading to potential crashes because of uninitialized drv_priv
data.
Add a missing sta->uploaded check and re-check fast xmit after inserting a sta.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240104181059.84032-1-nbd@nbd.name


Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a6e4f85d ]

The nl80211_dump_interface() supports resumption
in case nl80211_send_iface() doesn't have the
resources to complete its work.

The logic would store the progress as iteration
offsets for rdev and wdev loops.

However the logic did not properly handle
resumption for non-last rdev. Assuming a system
with 2 rdevs, with 2 wdevs each, this could
happen:

 dump(cb=[0, 0]):
  if_start=cb[1] (=0)
  send rdev0.wdev0 -> ok
  send rdev0.wdev1 -> yield
  cb[1] = 1

 dump(cb=[0, 1]):
  if_start=cb[1] (=1)
  send rdev0.wdev1 -> ok
  // since if_start=1 the rdev0.wdev0 got skipped
  // through if_idx < if_start
  send rdev1.wdev1 -> ok

The if_start needs to be reset back to 0 upon wdev
loop end.

The problem is actually hard to hit on a desktop,
and even on most routers. The prerequisites for
this manifesting was:
 - more than 1 wiphy
 - a few handful of interfaces
 - dump without rdev or wdev filter

I was seeing this with 4 wiphys 9 interfaces each.
It'd miss 6 interfaces from the last wiphy
reported to userspace.

Signed-off-by: Michal Kazior <michal@plume.com>
Link: https://msgid.link/20240116142340.89678-1-kazikcz@gmail.com


Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6386f6c9 ]

We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'irq_name'

drivers/dma/fsl-qdma.c: In function ‘fsl_qdma_irq_init’:
drivers/dma/fsl-qdma.c:824:46: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
  824 |                 sprintf(irq_name, "qdma-queue%d", i);
      |                                              ^~
drivers/dma/fsl-qdma.c:824:35: note: directive argument in the range [-2147483641, 2147483646]
  824 |                 sprintf(irq_name, "qdma-queue%d", i);
      |                                   ^~~~~~~~~~~~~~
drivers/dma/fsl-qdma.c:824:17: note: ‘sprintf’ output between 12 and 22 bytes into a destination of size 20
  824 |                 sprintf(irq_name, "qdma-queue%d", i);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 40429024 ]

We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'dev_id'

drivers/dma/sh/shdmac.c: In function ‘sh_dmae_probe’:
drivers/dma/sh/shdmac.c:541:34: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=]
  541 |                          "sh-dmae%d.%d", pdev->id, id);
      |                                  ^~
In function ‘sh_dmae_chan_probe’,
    inlined from ‘sh_dmae_probe’ at drivers/dma/sh/shdmac.c:845:9:
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 2147483647]
  541 |                          "sh-dmae%d.%d", pdev->id, id);
      |                          ^~~~~~~~~~~~~~
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 19]
drivers/dma/sh/shdmac.c:540:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16
  540 |                 snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  541 |                          "sh-dmae%d.%d", pdev->id, id);
      |                          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 83ab6816 ]

An abort that is responded to by iSCSI itself is added to tmr_list but does
not go to target core. A LUN_RESET that goes through tmr_list takes a
refcounter on the abort and waits for completion. However, the abort will
be never complete because it was not started in target core.

 Unable to locate ITT: 0x05000000 on CID: 0
 Unable to locate RefTaskTag: 0x05000000 on CID: 0.
 wait_for_tasks: Stopping tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop
 wait for tasks: tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop
...
 INFO: task kworker/0:2:49 blocked for more than 491 seconds.
 task:kworker/0:2     state:D stack:    0 pid:   49 ppid:     2 flags:0x00000800
 Workqueue: events target_tmr_work [target_core_mod]
Call Trace:
 __switch_to+0x2c4/0x470
 _schedule+0x314/0x1730
 schedule+0x64/0x130
 schedule_timeout+0x168/0x430
 wait_for_completion+0x140/0x270
 target_put_cmd_and_wait+0x64/0xb0 [target_core_mod]
 core_tmr_lun_reset+0x30/0xa0 [target_core_mod]
 target_tmr_work+0xc8/0x1b0 [target_core_mod]
 process_one_work+0x2d4/0x5d0
 worker_thread+0x78/0x6c0

To fix this, only add abort to tmr_list if it will be handled by target
core.

Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20240111125941.8688-1-d.bogdanov@yadro.com


Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 079be8fc upstream.

The validation of the value written to sched_rt_period_us was broken
because:

  - the sysclt_sched_rt_period is declared as unsigned int
  - parsed by proc_do_intvec()
  - the range is asserted after the value parsed by proc_do_intvec()

Because of this negative values written to the file were written into a
unsigned integer that were later on interpreted as large positive
integers which did passed the check:

  if (sysclt_sched_rt_period <= 0)
	return EINVAL;

This commit fixes the parsing by setting explicit range for both
perid_us and runtime_us into the sched_rt_sysctls table and processes
the values with proc_dointvec_minmax() instead.

Alternatively if we wanted to use full range of unsigned int for the
period value we would have to split the proc_handler and use
proc_douintvec() for it however even the
Documentation/scheduller/sched-rt-group.rst describes the range as 1 to
INT_MAX.

As far as I can tell the only problem this causes is that the sysctl
file allows writing negative values which when read back may confuse
userspace.

There is also a LTP test being submitted for these sysctl files at:

  http://patchwork.ozlabs.org/project/ltp/patch/20230901144433.2526-1-chrubis@suse.cz/



Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231002115553.3007-2-chrubis@suse.cz


[ pvorel: rebased for 5.15, 5.10 ]
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c7fcb998 upstream.

There is a 10% rounding error in the intial value of the
sysctl_sched_rr_timeslice with CONFIG_HZ_300=y.

This was found with LTP test sched_rr_get_interval01:

sched_rr_get_interval01.c:57: TPASS: sched_rr_get_interval() passed
sched_rr_get_interval01.c:64: TPASS: Time quantum 0s 99999990ns
sched_rr_get_interval01.c:72: TFAIL: /proc/sys/kernel/sched_rr_timeslice_ms != 100 got 90
sched_rr_get_interval01.c:57: TPASS: sched_rr_get_interval() passed
sched_rr_get_interval01.c:64: TPASS: Time quantum 0s 99999990ns
sched_rr_get_interval01.c:72: TFAIL: /proc/sys/kernel/sched_rr_timeslice_ms != 100 got 90

What this test does is to compare the return value from the
sched_rr_get_interval() and the sched_rr_timeslice_ms sysctl file and
fails if they do not match.

The problem it found is the intial sysctl file value which was computed as:

static int sysctl_sched_rr_timeslice = (MSEC_PER_SEC / HZ) * RR_TIMESLICE;

which works fine as long as MSEC_PER_SEC is multiple of HZ, however it
introduces 10% rounding error for CONFIG_HZ_300:

(MSEC_PER_SEC / HZ) * (100 * HZ / 1000)

(1000 / 300) * (100 * 300 / 1000)

3 * 30 = 90

This can be easily fixed by reversing the order of the multiplication
and division. After this fix we get:

(MSEC_PER_SEC * (100 * HZ / 1000)) / HZ

(1000 * (100 * 300 / 1000)) / 300

(1000 * 30) / 300 = 100

Fixes: 975e155e ("sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds")
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Petr Vorel <pvorel@suse.cz>
Link: https://lore.kernel.org/r/20230802151906.25258-2-chrubis@suse.cz


[ pvorel: rebased for 5.15, 5.10 ]
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 14db5f64 upstream.

Write error handling is racy and can sometime lead to the error recovery
path wrongly changing the inode size of a sequential zone file to an
incorrect value  which results in garbage data being readable at the end
of a file. There are 2 problems:

1) zonefs_file_dio_write() updates a zone file write pointer offset
   after issuing a direct IO with iomap_dio_rw(). This update is done
   only if the IO succeed for synchronous direct writes. However, for
   asynchronous direct writes, the update is done without waiting for
   the IO completion so that the next asynchronous IO can be
   immediately issued. However, if an asynchronous IO completes with a
   failure right before the i_truncate_mutex lock protecting the update,
   the update may change the value of the inode write pointer offset
   that was corrected by the error path (zonefs_io_error() function).

2) zonefs_io_error() is called when a read or write error occurs. This
   function executes a report zone operation using the callback function
   zonefs_io_error_cb(), which does all the error recovery handling
   based on the current zone condition, write pointer position and
   according to the mount options being used. However, depending on the
   zoned device being used, a report zone callback may be executed in a
   context that is different from the context of __zonefs_io_error(). As
   a result, zonefs_io_error_cb() may be executed without the inode
   truncate mutex lock held, which can lead to invalid error processing.

Fix both problems as follows:
- Problem 1: Perform the inode write pointer offset update before a
  direct write is issued with iomap_dio_rw(). This is safe to do as
  partial direct writes are not supported (IOMAP_DIO_PARTIAL is not
  set) and any failed IO will trigger the execution of zonefs_io_error()
  which will correct the inode write pointer offset to reflect the
  current state of the one on the device.
- Problem 2: Change zonefs_io_error_cb() into zonefs_handle_io_error()
  and call this function directly from __zonefs_io_error() after
  obtaining the zone information using blkdev_report_zones() with a
  simple callback function that copies to a local stack variable the
  struct blk_zone obtained from the device. This ensures that error
  handling is performed holding the inode truncate mutex.
  This change also simplifies error handling for conventional zone files
  by bypassing the execution of report zones entirely. This is safe to
  do because the condition of conventional zones cannot be read-only or
  offline and conventional zone files are always fully mapped with a
  constant file size.

Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 8dcc1a9d ("fs: New zonefs file system")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 67695f18 upstream.

In mfill_atomic_hugetlb(), mmap_changing isn't being checked
again if we drop mmap_lock and reacquire it. When the lock is not held,
mmap_changing could have been incremented. This is also inconsistent
with the behavior in mfill_atomic().

Link: https://lkml.kernel.org/r/20240117223729.1444522-1-lokeshgidra@google.com


Fixes: df2cc96e ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races")
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c1fc6484 upstream.

The sched_rr_timeslice can be reset to default by writing value that is
<= 0. However after reading from this file we always got the last value
written, which is not useful at all.

$ echo -1 > /proc/sys/kernel/sched_rr_timeslice_ms
$ cat /proc/sys/kernel/sched_rr_timeslice_ms
-1

Fix this by setting the variable that holds the sysctl file value to the
jiffies_to_msecs(RR_TIMESLICE) in case that <= 0 value was written.

Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Petr Vorel <pvorel@suse.cz>
Cc: Mahmoud Adam <mngyadam@amazon.com>
Link: https://lore.kernel.org/r/20230802151906.25258-3-chrubis@suse.cz


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 76025cc2 ]

The data offset for the SMB3.1.1 POSIX create context will always be
8-byte aligned so having the check 'noff + nlen >= doff' in
smb2_parse_contexts() is wrong as it will lead to -EINVAL because noff
+ nlen == doff.

Fix the sanity check to correctly handle aligned create context data.

Fixes: af1689a9 ("smb: client: fix potential OOBs in smb2_parse_contexts()")
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[Guru:smb2_parse_contexts()  is present in file smb2ops.c,
smb2ops.c file location is changed, modified patch accordingly.]
Signed-off-by: Guruswamy Basavaiah <guruswamy.basavaiah@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit af1689a9 ]

Validate offsets and lengths before dereferencing create contexts in
smb2_parse_contexts().

This fixes following oops when accessing invalid create contexts from
server:

  BUG: unable to handle page fault for address: ffff8881178d8cc3
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 4a01067 P4D 4a01067 PUD 0
  Oops: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 3 PID: 1736 Comm: mount.cifs Not tainted 6.7.0-rc4 #1
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
  rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
  RIP: 0010:smb2_parse_contexts+0xa0/0x3a0 [cifs]
  Code: f8 10 75 13 48 b8 93 ad 25 50 9c b4 11 e7 49 39 06 0f 84 d2 00
  00 00 8b 45 00 85 c0 74 61 41 29 c5 48 01 c5 41 83 fd 0f 76 55 <0f> b7
  7d 04 0f b7 45 06 4c 8d 74 3d 00 66 83 f8 04 75 bc ba 04 00
  RSP: 0018:ffffc900007939e0 EFLAGS: 00010216
  RAX: ffffc90000793c78 RBX: ffff8880180cc000 RCX: ffffc90000793c90
  RDX: ffffc90000793cc0 RSI: ffff8880178d8cc0 RDI: ffff8880180cc000
  RBP: ffff8881178d8cbf R08: ffffc90000793c22 R09: 0000000000000000
  R10: ffff8880180cc000 R11: 0000000000000024 R12: 0000000000000000
  R13: 0000000000000020 R14: 0000000000000000 R15: ffffc90000793c22
  FS: 00007f873753cbc0(0000) GS:ffff88806bc00000(0000)
  knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffff8881178d8cc3 CR3: 00000000181ca000 CR4: 0000000000750ef0
  PKRU: 55555554
  Call Trace:
   <TASK>
   ? __die+0x23/0x70
   ? page_fault_oops+0x181/0x480
   ? search_module_extables+0x19/0x60
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? exc_page_fault+0x1b6/0x1c0
   ? asm_exc_page_fault+0x26/0x30
   ? smb2_parse_contexts+0xa0/0x3a0 [cifs]
   SMB2_open+0x38d/0x5f0 [cifs]
   ? smb2_is_path_accessible+0x138/0x260 [cifs]
   smb2_is_path_accessible+0x138/0x260 [cifs]
   cifs_is_path_remote+0x8d/0x230 [cifs]
   cifs_mount+0x7e/0x350 [cifs]
   cifs_smb3_do_mount+0x128/0x780 [cifs]
   smb3_get_tree+0xd9/0x290 [cifs]
   vfs_get_tree+0x2c/0x100
   ? capable+0x37/0x70
   path_mount+0x2d7/0xb80
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? _raw_spin_unlock_irqrestore+0x44/0x60
   __x64_sys_mount+0x11a/0x150
   do_syscall_64+0x47/0xf0
   entry_SYSCALL_64_after_hwframe+0x6f/0x77
  RIP: 0033:0x7f8737657b1e

Reported-by: Robert Morris <rtm@csail.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[Guru: Removed changes to cached_dir.c and checking return value
of smb2_parse_contexts in smb2ops.c]
Signed-off-by: Guruswamy Basavaiah <guruswamy.basavaiah@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit eec04ea1 ]

Fix potential OOB in receive_encrypted_standard() if server returned a
large shdr->NextCommand that would end up writing off the end of
@next_buffer.

Fixes: b24df3e3 ("cifs: update receive_encrypted_standard to handle compounded responses")
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[Guru: receive_encrypted_standard() is present in file smb2ops.c,
smb2ops.c file location is changed, modified patch accordingly.]
Signed-off-by: Guruswamy Basavaiah <guruswamy.basavaiah@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bbe77c14 upstream.

The dsmark qdisc has served us well over the years for diffserv but has not
been getting much attention due to other more popular approaches to do diffserv
services. Most recently it has become a shooting target for syzkaller. For this
reason, we are retiring it.

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fb38306c upstream.

The ATM qdisc has served us well over the years but has not been getting much
TLC due to lack of known users. Most recently it has become a shooting target
for syzkaller. For this reason, we are retiring it.

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 051d4420 upstream.

While this amazing qdisc has served us well over the years it has not been
getting any tender love and care and has bitrotted over time.
It has become mostly a shooting target for syzkaller lately.
For this reason, we are retiring it. Goodbye CBQ - we loved you.

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Link: https://lore.kernel.org/r/20240221125954.917878865@linuxfoundation.org


Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: kernelci.org bot <bot@kernelci.org>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b5d1b4b4 upstream.

The "msg_addr" variable is u64.  However, the "aligned_offset" is an
unsigned int.  This means that when the code does:

  msg_addr &= ~aligned_offset;

it will unintentionally zero out the high 32 bits.  Use ALIGN_DOWN() to do
the alignment instead.

Fixes: 2217fffc ("PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support")
Link: https://lore.kernel.org/r/af59c7ad-ab93-40f7-ad4a-7ac0b14d37f5@moroto.mountain


Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a9f31047 upstream.

We had a number of short comings:

- EEE must be re-evaluated whenever the state machine detects a link
  change as wight be switching from a link partner with EEE
  enabled/disabled

- tx_lpi_enabled controls whether EEE should be enabled/disabled for the
  transmit path, which applies to the TBUF block

- We do not need to forcibly enable EEE upon system resume, as the PHY
  state machine will trigger a link event that will do that, too

Fixes: 6ef398ea ("net: bcmgenet: add EEE support")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c301f098 upstream.

The problem is in nft_byteorder_eval() where we are iterating through a
loop and writing to dst[0], dst[1], dst[2] and so on...  On each
iteration we are writing 8 bytes.  But dst[] is an array of u32 so each
element only has space for 4 bytes.  That means that every iteration
overwrites part of the previous element.

I spotted this bug while reviewing commit caf3ef74 ("netfilter:
nf_tables: prevent OOB access in nft_byteorder_eval") which is a related
issue.  I think that the reason we have not detected this bug in testing
is that most of time we only write one element.

Fixes: ce1e7989 ("netfilter: nft_byteorder: provide 64bit le/be conversion")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[Ajay: Modified to apply on v5.10.y]
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6ab502bc ]

Some devices power the DSI PHY/PLL through a power rail that we model
as a GENPD. Enable runtime PM to make it suspendable.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543352/
Link: https://lore.kernel.org/r/20230620-topic-dsiphy_rpm-v2-2-a11a751f34f0@linaro.org


Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Stable-dep-of: 3d07a411 ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b4060db9 ]

The PM Runtime docs say:

  Drivers in ->remove() callback should undo the runtime PM changes done
  in ->probe(). Usually this means calling pm_runtime_disable(),
  pm_runtime_dont_use_autosuspend() etc.

>From grepping code, it's clear that many people aren't aware of the
need to call pm_runtime_dont_use_autosuspend().

When brainstorming solutions, one idea that came up was to leverage
the new-ish devm_pm_runtime_enable() function. The idea here is that:

 * When the devm action is called we know that the driver is being
   removed. It's the perfect time to undo the use_autosuspend.

 * The code of pm_runtime_dont_use_autosuspend() already handles the
   case of being called when autosuspend wasn't enabled.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 3d07a411 ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b3636a3a ]

A typical code pattern for pm_runtime_enable() call is to call it in the
_probe function and to call pm_runtime_disable() both from _probe error
path and from _remove function. For some drivers the whole remove
function would consist of the call to pm_remove_disable().

Add helper function to replace this bolierplate piece of code. Calling
devm_pm_runtime_enable() removes the need for calling
pm_runtime_disable() both in the probe()'s error path and in the
remove() function.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210731195034.979084-2-dmitry.baryshkov@linaro.org


Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: 3d07a411 ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bd504bcf upstream.

The kvmalloc function fails with a warning if the size is larger than
INT_MAX. The warning was triggered by a syscall testing robot.

In order to avoid the warning, this commit limits the number of targets to
1048576 and the size of the parameter area to 1073741824.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: He Gao <hegao@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5124a0a5 upstream.

If DAT metadata file block access fails due to corruption of the DAT file
or abnormal virtual block numbers held by b-trees or inodes, a kernel
warning is generated.

This replaces the WARN_ONs by error output, so that a kernel, booted with
panic_on_warn, does not panic.  This patch also replaces the detected
return code -ENOENT with another internal code -EINVAL to notify the bmap
layer of metadata corruption.  When the bmap layer sees -EINVAL, it
handles the abnormal situation with nilfs_bmap_convert_error() and finally
returns code -EIO as it should.

Link: https://lkml.kernel.org/r/0000000000005cc3d205ea23ddcf@google.com
Link: https://lkml.kernel.org/r/20230126164114.6911-1-konishi.ryusuke@gmail.com


Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by:  <syzbot+5d5d25f90f195a3cfcb4@syzkaller.appspotmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5bc09b39 upstream.

According to a syzbot report, end_buffer_async_write(), which handles the
completion of block device writes, may detect abnormal condition of the
buffer async_write flag and cause a BUG_ON failure when using nilfs2.

Nilfs2 itself does not use end_buffer_async_write().  But, the async_write
flag is now used as a marker by commit 7f42ec39 ("nilfs2: fix issue
with race condition of competition between segments for dirty blocks") as
a means of resolving double list insertion of dirty blocks in
nilfs_lookup_dirty_data_buffers() and nilfs_lookup_node_buffers() and the
resulting crash.

This modification is safe as long as it is used for file data and b-tree
node blocks where the page caches are independent.  However, it was
irrelevant and redundant to also introduce async_write for segment summary
and super root blocks that share buffers with the backing device.  This
led to the possibility that the BUG_ON check in end_buffer_async_write
would fail as described above, if independent writebacks of the backing
device occurred in parallel.

The use of async_write for segment summary buffers has already been
removed in a previous change.

Fix this issue by removing the manipulation of the async_write flag for
the remaining super root block buffer.

Link: https://lkml.kernel.org/r/20240203161645.4992-1-konishi.ryusuke@gmail.com


Fixes: 7f42ec39 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by:  <syzbot+5c04210f7c7f897c1e7f@syzkaller.appspotmail.com>
Closes: https://lkml.kernel.org/r/00000000000019a97c05fd42f8c8@google.com


Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 944d5fe5 upstream.

On some systems, sys_membarrier can be very expensive, causing overall
slowdowns for everything.  So put a lock on the path in order to
serialize the accesses to prevent the ability for this to be called at
too high of a frequency and saturate the machine.

Reviewed-and-tested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Fixes: 22e4ebb9 ("membarrier: Provide expedited private command")
Fixes: c5f58bd5 ("membarrier: Provide GLOBAL_EXPEDITED command")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ converted to explicit mutex_*() calls - cleanup.h is not in this stable
  branch - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 23d05d56 upstream.

Once again syzbot is able to crash the kernel in skb_segment() [1]

GSO_BY_FRAGS is a forbidden value, but unfortunately the following
computation in skb_segment() can reach it quite easily :

	mss = mss * partial_segs;

65535 = 3 * 5 * 17 * 257, so many initial values of mss can lead to
a bad final result.

Make sure to limit segmentation so that the new mss value is smaller
than GSO_BY_FRAGS.

[1]

general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 5079 Comm: syz-executor993 Not tainted 6.7.0-rc4-syzkaller-00141-g1ae4cd3cbdd0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0xa0e/0xd00 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x534/0x17e0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x290/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x36c/0xeb0 net/core/dev.c:3626
__dev_queue_xmit+0x6f3/0x3d60 net/core/dev.c:4338
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c6/0x5220 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f8692032aa9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 d1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff8d685418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8692032aa9
RDX: 0000000000010048 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 00000000000f4240 R08: 0000000020000540 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff8d685480
R13: 0000000000000001 R14: 00007fff8d685480 R15: 0000000000000003
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 3953c46c ("sk_buff: allow segmenting based on frag sizes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231212164621.4131800-1-edumazet@google.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 3f225f29 which is
commit 59b37fe5 upstream.

The shadow call stack for irq now is stored in current task's thread info
in irq_stack_entry. There is a possibility that we have some soft irqs
pending at the end of hard irq, and when we process softirq with the irq
enabled, irq_stack_entry will enter again and overwrite the shadow call
stack whitch stored in current task's thread info, leading to the
incorrect shadow call stack restoration for the first entry of the hard
IRQ, then the system end up with a panic.

task A                               |  task A
-------------------------------------+------------------------------------
el1_irq        //irq1 enter          |
  irq_handler  //save scs_sp1        |
    gic_handle_irq                   |
    irq_exit                         |
      __do_softirq                   |
                                     | el1_irq         //irq2 enter
                                     |   irq_handler   //save scs_sp2
                                     |                 //overwrite scs_sp1
                                     |   ...
                                     |   irq_stack_exit //restore scs_sp2
  irq_stack_exit //restore wrong     |
                 //scs_sp2           |

So revert this commit to fix it.

Fixes: 3f225f29 ("arm64: Stash shadow stack pointer in the task struct on interrupt")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0c52310f upstream.

While in theory the timer can be triggered before expires + delta, for the
cases of RT tasks they really have no business giving any lenience for
extra slack time, so override any passed value by the user and always use
zero for schedule_hrtimeout_range() calls. Furthermore, this is similar to
what the nanosleep(2) family already does with current->timer_slack_ns.

Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230123173206.6764-3-dave@stgolabs.net


Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 27c5a095 upstream.

The patch fdb8e12cc2cc ("netfilter: ipset: fix performance regression
in swap operation") missed to add the calls to gc cancellations
at the error path of create operations and at module unload. Also,
because the half of the destroy operations now executed by a
function registered by call_rcu(), neither NFNL_SUBSYS_IPSET mutex
or rcu read lock is held and therefore the checking of them results
false warnings.

Fixes: 97f7cf1c ("netfilter: ipset: fix performance regression in swap operation")
Reported-by:  <syzbot+52bbc0ad036f6f0d4a25@syzkaller.appspotmail.com>
Reported-by: Brad Spengler <spender@grsecurity.net>
Reported-by: Стас Ничипорович <stasn77@gmail.com>
Tested-by: Brad Spengler <spender@grsecurity.net>
Tested-by: Стас Ничипорович <stasn77@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 97f7cf1c upstream.

The patch "netfilter: ipset: fix race condition between swap/destroy
and kernel side add/del/test", commit 28628fa9 fixes a race condition.
But the synchronize_rcu() added to the swap function unnecessarily slows
it down: it can safely be moved to destroy and use call_rcu() instead.

Eric Dumazet pointed out that simply calling the destroy functions as
rcu callback does not work: sets with timeout use garbage collectors
which need cancelling at destroy which can wait. Therefore the destroy
functions are split into two: cancelling garbage collectors safely at
executing the command received by netlink and moving the remaining
part only into the rcu callback.

Link: https://lore.kernel.org/lkml/C0829B10-EAA6-4809-874E-E1E9C05A8D84@automattic.com/


Fixes: 28628fa9 ("netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test")
Reported-by: Ale Crismani <ale.crismani@automattic.com>
Reported-by: David Wang <00107082@163.com>
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit efbd6398 ]

GNU's addr2line can have problems parsing a vmlinux built with LLVM,
particularly when LTO was used.  In order to decode the traces correctly
this patch adds the ability to switch to LLVM's utilities readelf and
addr2line.  The same approach is followed by Will in [1].

Before:
  $ scripts/decode_stacktrace.sh vmlinux < kernel.log
  [17716.240635] Call trace:
  [17716.240646] skb_cow_data (??:?)
  [17716.240654] esp6_input (ld-temp.o:?)
  [17716.240666] xfrm_input (ld-temp.o:?)
  [17716.240674] xfrm6_rcv (??:?)
  [...]

After:
  $ LLVM=1 scripts/decode_stacktrace.sh vmlinux < kernel.log
  [17716.240635] Call trace:
  [17716.240646] skb_cow_data (include/linux/skbuff.h:2172 net/core/skbuff.c:4503)
  [17716.240654] esp6_input (net/ipv6/esp6.c:977)
  [17716.240666] xfrm_input (net/xfrm/xfrm_input.c:659)
  [17716.240674] xfrm6_rcv (net/ipv6/xfrm6_input.c:172)
  [...]

Note that one could set CROSS_COMPILE=llvm- instead to hack around this
issue.  However, doing so can break the decodecode routine as it will
force the selection of other LLVM utilities down the line e.g.  llvm-as.

[1] https://lore.kernel.org/all/20230914131225.13415-3-will@kernel.org/

Link: https://lkml.kernel.org/r/20230929034836.403735-1-cmllamas@google.com


Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Tested-by: Justin Stitt <justinstitt@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 99115db4 ]

Recent versions of both Binutils (`c++filt`) and LLVM (`llvm-cxxfilt`)
provide Rust v0 mangling support.

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Stable-dep-of: efbd6398 ("scripts/decode_stacktrace.sh: optionally use LLVM utilities")
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3af8acf6 ]

Old bash version don't support associative array variables.  Avoid to use
associative array variables to avoid error.

Without this, old bash version will report error as fellowing
[   15.954042] Kernel panic - not syncing: sysrq triggered crash
[   15.955252] CPU: 1 PID: 167 Comm: sh Not tainted 5.18.0-rc1-00208-gb7d075db2fd5 #4
[   15.956472] Hardware name: Hobot J5 Virtual development board (DT)
[   15.957856] Call trace:
./scripts/decode_stacktrace.sh: line 128: ,dump_backtrace: syntax error: operand expected (error token is ",dump_backtrace")

Link: https://lkml.kernel.org/r/20220409180331.24047-1-schspa@gmail.com


Signed-off-by: Schspa Shi <schspa@gmail.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: efbd6398 ("scripts/decode_stacktrace.sh: optionally use LLVM utilities")
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5bf0f3bc ]

Sometimes if you're using tools that have linked things improperly or have
new features/sections that older tools don't expect you'll see warnings
printed to stderr.  We don't really care about these warnings, so let's
just silence these messages to cleanup output of this script.

Link: https://lkml.kernel.org/r/20210511003845.2429846-10-swboyd@chromium.org


Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: efbd6398 ("scripts/decode_stacktrace.sh: optionally use LLVM utilities")
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0c2a5f47 ]

The UART supports an auto-RTS mode in which the RTS pin is automatically
activated during transmission. So mark this mode as being supported even
if RTS is not controlled by the driver but the UART.

Also the serial core expects now at least one of both modes rts-on-send or
rts-after-send to be supported. This is since during sanitization
unsupported flags are deleted from a RS485 configuration set by userspace.
However if the configuration ends up with both flags unset, the core prints
a warning since it considers such a configuration invalid (see
uart_sanitize_serial_rs485()).

Cc:  <stable@vger.kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240103061818.564-8-l.sanfilippo@kunbus.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>