- Jun 20, 2024
-
-
Weilin Wu authored
The previous patch that fixed AoD blip issue also occurs incorrect timing of ELVSS in the transition of NBM and HBM. We should have different setting for AoD and HBM on BOE panel. Bug: 343382960 Test: Blip issue disappear Signed-off-by: Weilin Wu <wlogsky@google.com> (cherry picked from https://partner-android-review.googlesource.com/q/commit:1c1eaf232a94c47a9b126e2f815e5506a3dcc30c) Merged-In: I4594de3669def0ffb9ae43b96983afcf5f02d30b Change-Id: I4594de3669def0ffb9ae43b96983afcf5f02d30b
-
KUOWEI TAI authored
Enable dimming off from off to on and add dimming on and off dsi commands on wj013pgm, amb127fp01 and wj014sgm panels. Bug: 336666788 Test: manual test Signed-off-by: William Tai <williamtai@google.com> (cherry picked from https://partner-android-review.googlesource.com/q/commit:0d107c9e02e19c39e97fff1bc322b8d73fd948bb) Merged-In: I81704b6f8e4dabe9dca8453af76d9f3cb8836d78 Change-Id: I81704b6f8e4dabe9dca8453af76d9f3cb8836d78
-
- May 25, 2024
-
-
Andrei Ciubotariu authored
Bug: 342694683 Change-Id: I817a3cb4f35e2f76b4ba021e8a13e506d4a99f60 Signed-off-by: Andrei Ciubotariu <aciubotariu@google.com>
-
- May 24, 2024
-
-
Chuong Hoang authored
Bit 9 enables HBM, but was unset here, making it impossible to enable. Bug: 341994011 Test: Able to enable HBM Change-Id: Iee97d16e4783e3c4c3a484c69c7ce61f97904f9e Signed-off-by: Chuong Hoang <chuongh@google.com>
-
- May 17, 2024
-
-
Weilin Wu authored
Since the AOD deb level is controlled directly by AP now, the bl-step table can be removed now. Bug: 340899871 Test: Build successfully Change-Id: I263ca0698f0b07628779d8bd8831339b38c184dc Signed-off-by: Weilin Wu <wlogsky@google.com>
-
- May 15, 2024
-
-
syzkaller doesn't support the use of `repo`, so the symlinks we specified there don't exist in syzkaller checkouts, and the build fails, preventing fuzzing. (cherry picked from commit 1f3d3403e1f7c206d0edceeb9a928a46301bf68c) Bug: 339448905 Test: https://android-build.corp.google.com/abtd/run/L18200030003739448/ Test: clone using superproject, build Change-Id: I6aa04b3ab80d195d08df2c71d3dc1b6e7a41b779 Signed-off-by: Shiridi Sai Prasad <shiridi@google.com>
-
- May 14, 2024
-
-
Weilin Wu authored
Bug: 330246366 Test: Check ESD reset sequence Change-Id: Ia4dd622ec8f8d84de956b3257c6c16fe9520adb6 Signed-off-by: Weilin Wu <wlogsky@google.com>
-
- May 11, 2024
-
-
Andrei Ciubotariu authored
-
- May 05, 2024
-
-
Andrei Ciubotariu authored
Bug: 332548598 Change-Id: I81ad6ae37f7d1af4dfe43eb88e64799ec1379de7 Signed-off-by: Andrei Ciubotariu <aciubotariu@google.com>
-
- May 02, 2024
-
-
Simon Wei authored
To align touch driver between nt38350 and nt38360 Bug: 333323878 Test: check if the touch module could be loaded correctly Change-Id: I8c5fc27113ffb8b147e4f37e72ad3066fce053e8 Signed-off-by: Simon Wei <jentsewei@google.com>
-
- Apr 30, 2024
-
-
Several files and pieces of logic are now unused, since the kernel modules build with bazel, and this branch is not shared with the android13-msm-pixelwatch-5.15 branch. So, clean up all unused/non-bazel build logic. Bug: 322408856 Change-Id: If89d20fcb382004353b1c9861eb2cdb4c48cbe8b Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
-
- Apr 26, 2024
-
-
The supported and documented approach for setting Dynamic Boost Control parameters is via a prebuilt file. Bug: 330942804 Test: confirm prebuilt file is loaded Change-Id: I9f73a14ffa0cc1d786600fc7d4750b8d2dabc992 Signed-off-by: Matt Stephenson <stephensonmatt@google.com>
-
- Apr 25, 2024
-
-
Weilin Wu authored
The ELVSS timings are not properly configured, so the blip issue happens if the system is in low brightness condition. BOE and SDC has provided the patch code for that and we should add the code into the power on sequence. Bug: 330633450 Test: Check whether the flickering happens during the transition Test: Check ELVSS waveform with EE team Change-Id: I4eb2fd5b1eef3e7994950c76d96e5b2b9c5eda85 Signed-off-by: Weilin Wu <wlogsky@google.com>
-
- Mar 29, 2024
-
-
Bug: 327994814 Test: cat device nodes Change-Id: I58b40855c10b4a8bdf55f62e8fd4de92bfd7e36d Signed-off-by: Matt Stephenson <stephensonmatt@google.com>
-
- Mar 21, 2024
-
-
Weilin Wu authored
Bug: 319876700 Test: echo 511 > /sys/class/backlight/panel0-backlight/brightness Change-Id: Ia0a45e7500648181918701d2513844faaabd62e3 Signed-off-by: Weilin Wu <wlogsky@google.com>
-
- Mar 20, 2024
-
-
Bug: 329101937 Test : Set DVT CDT, verify MCU firmware loads and boot completes Change-Id: I92ba2615a026382ed360209ad2f6ebaec7765ccd
-
- Mar 07, 2024
-
-
Weilin Wu authored
-
- Mar 06, 2024
-
-
Wlogsky authored
Bug: 319877550 Test: Calculate some NBM DBV to AOD DBV manually Change-Id: Id5a64a397d9d5c684c508db28ab872c3d5f9d11e Signed-off-by: Wlogsky <wlogsky@google.com>
-
- Mar 05, 2024
-
-
Treehugger Robot authored
-
- Mar 04, 2024
-
-
To prevent screen blackout issue, there should be some delay after panel sleep-in. Bug: 319440765 Test: manual (quickly turn panel on/off) Change-Id: I5a513190c7f25082e629b7ad49c29186baff17ff Signed-off-by: Weilin Wu <wlogsky@google.com>
-
- Feb 29, 2024
-
-
Wlogsky authored
During the factory test, some devices are not connected to the panel and takes too much time to boot up. By adding sim panel support, we can reduce the boot time by around 6~8 secs. Bug: 300325644 Test: adb shell getprop sys.boot_completed Change-Id: Icc1538bc06d36c9b314b0c9457c5295c7e449b1d Signed-off-by: Wlogsky <wlogsky@google.com>
-
- Feb 16, 2024
-
-
Isaac Manjarres authored
The smblite-shim kernel module is common to all sw5100 based devices, so move it to the list of common sw5100 modules. Bug: 322408856 Change-Id: I35ba86e315480b0c8f446cdc01c34179e2f19257 Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
-
- Feb 15, 2024
-
-
Brandon Edens authored
Correct Luna battery profile erroneously named as Selene. Bug: 325489982 Test: Confirm battery profile has proper name in "battid" log line Change-Id: I6a94e5250bfc88ce4aa2324a70de33624cbe66d9
-
- Feb 09, 2024
-
-
Brandon Edens authored
Adjust Selene and Luna battery reserve percentage to 3% for the PRD that device can be left behind over weekend and retain RTC. Bug: 294063168 Bug: 294063778 Test: Confirm offset adb shell 'cat /sys/class/power_supply/sw5100_bms/soc_shutdown_offset' Change-Id: I090c8758cf933be9da2090e71e1bbf00daccfe0f
-
Isaac Manjarres authored
Now that the device-specific bazelrc files are imported automatically by the top-level device.bazelrc file, there is no need to specify their locations with the "--bazelrc" startup option, so remove it. Bug: 322408856 Change-Id: Ic9cbd08a673f568d6c19435fc7538089eee77ec5 Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
-
- Feb 08, 2024
-
-
Isaac Manjarres authored
Specify the seluna specific external modules and devicetree information and use the define_sw5100_pixel_watch() macro to generate the rules to build the kernel artifacts for seluna with bazel. Bug: 322408856 Change-Id: Id02266531b913a95bccd2776d32f4ebcd63967ae Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
-
Isaac Manjarres authored
The symlinks to the multimedia devicetrees don't need to be tracked, so ignore them. Bug: 322408856 Change-Id: Ia348a46423219195429bd3aeb1191503965ab1d7 Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
-
Benjamin Fennema authored
Bug: 324323428 Change-Id: Ice6837e28a062e288c1cbb840f2b90a235737cf1 Signed-off-by: Ben Fennema <fennema@google.com>
-
- Jan 31, 2024
-
-
Matt Stephenson authored
Previously, there were two dtsi settings that had a lot of overlap, this sets a shared dtsi and overrides for the p1 config. Test: idlcli, haptics_playback.sh -n Bug: 320768437 Change-Id: Ib339cb91bb86adff59cd58c9131b69d817ee0b4b Signed-off-by: Matt Stephenson <stephensonmatt@google.com>
-
- Jan 26, 2024
-
-
Dwayne Barry authored
Merge "seluna dts: Tweak Luna charge table so GBMS stores accurate CC limits" into android13-msm-pixelwatch-5.15
-
Andrew Evans authored
-
Andrew Evans authored
Bug: 319474743 Change-Id: I3b7ead0f8e94dac1f8365003b1da8281b384a08e Signed-off-by: Andrew Evans <andrewevans@google.com>
-
- Jan 25, 2024
-
-
Benjamin Fennema authored
Bug: 303337284 Change-Id: I6d705f912f6a4f938616a0f5e06232a52a183c5e Signed-off-by: Ben Fennema <fennema@google.com>
-
- Jan 22, 2024
-
-
Dwayne Barry authored
Modify Luna CC limits to make sure they're rounded down to the nearest 25mA by Google BMS. Bug: 303401402 Test: Charge Luna and observe cc_max is set properly Signed-off-by: Dwayne Barry <dwaynebarry@google.com> Change-Id: I34d3fe386dd462b7bbd01ef5cd098f5ecdafb49b
-
- Jan 17, 2024
-
-
Jonathan Schwanbeck authored
-
Jonathan Schwanbeck authored
Add new params to enable and configure the CS40L26 DC input watchdog pursuant to Cirrus's provided patch. This is a feature of the CS40L26 IC which can trigger an IRQ and mute the vibration if it detects an excessive DC offset to the haptics stream. We configure the watchdog to trigger when the waveform exceeds 20% of full-scale output across 195 msec. Bug: 314128907 Bug: 317238987 Test: Played haptics test .wavs with haptics_playback.sh and observed that the watchdog correctly triggered, muted the vibrations, and triggered an interrupt (which generates a kernel log message). The go/AudioMotionHaptics demo app's ACH continues to work. Change-Id: I2698f8bff7246d76eb516ff7f564768a668acada Signed-off-by: Jonathan Schwanbeck <jschwanbeck@google.com>
-
- Jan 11, 2024
-
-
Andrei Ciubotariu authored
100% sys SOC should now correspond to - 45mA on Selene - 55mA on Luna Bug: 317269170 Change-Id: I3df2a251508e4e0fd058b8cd4cbe5df588ef1974 Signed-off-by: Andrei Ciubotariu <aciubotariu@google.com>
-
- Jan 10, 2024
-
-
Matt Delmage authored
Bug: 317426219 Test: Set EVT1.5 CDT, verify new MCU firmware is loaded and boot completes Change-Id: Ib38342e52a2ab966532a3edf941dd21dc2b7e620 Signed-off-by: Matt Delmage <mdelmage@google.com>
-
- Jan 08, 2024
-
-
Matt Delmage authored
Bug: 316384810 Signed-off-by: Matt Delmage <mdelmage@google.com> Test: Dump Selene EVT1 device tree before and after, no changes Change-Id: I74806be1ed82973d414053a5cd274cf6435961dc
-
- Jan 06, 2024
-
-
Treehugger Robot authored
-