diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 7d2c72562c73552a43b912cdb08cd931d966ec8b..9148a01ed6d9f085c76923d0d3f1532299d0c448 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -105,9 +105,13 @@ &fec {
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
phy-reset-duration = <20>;
phy-supply = <&sw2_reg>;
- phy-handle = <ðphy0>;
status = "okay";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
mdio {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index 236fc205c38903cd1b3f4ba7e2fffb13972c18fb..d0768ae429faaf7d897715e8bfad042bf5630880 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -406,6 +406,18 @@ ®_soc {
vin-supply = <&sw1_reg>;
};
+®_pu {
+ vin-supply = <&sw1_reg>;
+};
+
+®_vdd1p1 {
+ vin-supply = <&sw2_reg>;
+};
+
+®_vdd2p5 {
+ vin-supply = <&sw2_reg>;
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
index 828cf3e39784afd600090615daa3d0f7d7672919..c4e146f3341bb85d93a0f9204cd999e8023abaeb 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
@@ -126,7 +126,7 @@ boardid: gpio@3a {
compatible = "nxp,pca8574";
reg = <0x3a>;
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts
index 5339210b63d0f43ed4ea17e949e5a873074d5cb6..dd8003bd1fc09c83d6aa83e79c46f14e07674599 100644
--- a/arch/arm/boot/dts/imx7d-meerkat96.dts
+++ b/arch/arm/boot/dts/imx7d-meerkat96.dts
@@ -193,7 +193,7 @@ &usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
keep-power-in-suspend;
- tuning-step = <2>;
+ fsl,tuning-step = <2>;
vmmc-supply = <®_3p3v>;
no-1-8-v;
broken-cd;
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index e57da0d32b98d383b8f353a25195cf635bc2d265..e519897fae082671ada0dfb31a7a40c859b94d2f 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -351,7 +351,7 @@ &usdhc1 {
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
bus-width = <4>;
- tuning-step = <2>;
+ fsl,tuning-step = <2>;
vmmc-supply = <®_3p3v>;
wakeup-source;
no-1-8-v;
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index 020e6deb67c8c6e9de192905d839b84ec994837d..237e8aa9fe8378e584590a96bb294300574352aa 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -12,6 +12,7 @@
#include <linux/suspend.h>
#include <linux/io.h>
+#include "common.h"
#include "hardware.h"
static int mx27_suspend_enter(suspend_state_t state)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 2ee527c00284085d28921f30906777e6c98f130b..1026a816dcc0208642dcfbe5b20ad019c1c795af 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -458,20 +458,6 @@ static struct gpiod_lookup_table leds_gpio_table = {
#ifdef CONFIG_LEDS_TRIGGERS
DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
-
-static int ams_delta_camera_power(struct device *dev, int power)
-{
- /*
- * turn on camera LED
- */
- if (power)
- led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
- else
- led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
- return 0;
-}
-#else
-#define ams_delta_camera_power NULL
#endif
static struct platform_device ams_delta_audio_device = {
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index c40cf5ef8607926b372d8fab52ac0ce61a852161..977b0b744c22aefb413ea53ecc3c64ca8011d5ad 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -320,7 +320,7 @@ static int tps_setup(struct i2c_client *client, void *context)
{
if (!IS_BUILTIN(CONFIG_TPS65010))
return -ENOSYS;
-
+
tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
@@ -394,6 +394,8 @@ static void __init h2_init(void)
BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
gpio_direction_input(H2_NAND_RB_GPIO_PIN);
+ gpiod_add_lookup_table(&isp1301_gpiod_table);
+
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 2c1e2b32b9b36f26507ecbbae13ea5c1de978143..a745d64d46995a53d0e88d786bb80e49fa38bbb9 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -655,9 +655,13 @@ static int __init omap_pm_init(void)
irq = INT_7XX_WAKE_UP_REQ;
else if (cpu_is_omap16xx())
irq = INT_1610_WAKE_UP_REQ;
- if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
- NULL))
- pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
+ else
+ irq = -1;
+
+ if (irq >= 0) {
+ if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", NULL))
+ pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
+ }
/* Program new power ramp-up time
* (0 for most boards since we don't lower voltage when in deep sleep)
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 418a61ecb827512e5ba91aaf64f23fc9330a542f..5e86145db0e2ac9e8b8ac769ea3ccc122e293935 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -322,6 +322,7 @@ static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
static void n8x0_mmc_callback(void *data, u8 card_mask)
{
+#ifdef CONFIG_MMC_OMAP
int bit, *openp, index;
if (board_is_n800()) {
@@ -339,7 +340,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
else
*openp = 0;
-#ifdef CONFIG_MMC_OMAP
omap_mmc_notify_cover_event(mmc_device, index, *openp);
#else
pr_warn("MMC: notify cover event not available\n");
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 6409b47b73e4a245b60069f47df2f1d0702e94b4..7336c1fd0ddace598cce75b03762c9156292732d 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -165,6 +165,7 @@ config ARCH_MEDIATEK
config ARCH_MESON
bool "Amlogic Platforms"
+ select COMMON_CLK
select MESON_IRQ_GPIO
help
This enables support for the arm64 based Amlogic SoCs
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
index 6c309b97587df1fdf872fac3aaf90d6be2550341..e8d31279b7a34567d7d2765605fdab2ac9d2b860 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -46,7 +46,8 @@ phy0: ethernet-phy@4 {
eee-broken-100tx;
qca,clk-out-frequency = <125000000>;
qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
- vddio-supply = <&vddh>;
+ qca,keep-pll-enabled;
+ vddio-supply = <&vddio>;
vddio: vddio-regulator {
regulator-name = "VDDIO";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
index df212ed5bb9422bd17618b8efae0cb2d536c1271..e65d1c477e2ceb38509e121f4931114e31718c90 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -31,11 +31,10 @@ phy1: ethernet-phy@4 {
reg = <0x4>;
eee-broken-1000t;
eee-broken-100tx;
-
qca,clk-out-frequency = <125000000>;
qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
-
- vddio-supply = <&vddh>;
+ qca,keep-pll-enabled;
+ vddio-supply = <&vddio>;
vddio: vddio-regulator {
regulator-name = "VDDIO";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index eca06a0c3cf876601f45905548cdc9d74dbd1e08..a30249ebffa8c0878617d5cc5672b45c90a29cd8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -197,8 +197,8 @@ soc: soc {
ddr: memory-controller@1080000 {
compatible = "fsl,qoriq-memory-controller";
reg = <0x0 0x1080000 0x0 0x1000>;
- interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
- big-endian;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ little-endian;
};
dcfg: syscon@1e00000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
index 631e01c1b9fd4d8b8dc8adf41adcdc7cc4aad986..be1e7d6f0ecb5d7b48692efdf3f62613ed6ac953 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
@@ -88,11 +88,11 @@ codec2: codec@18 {
pinctrl-0 = <&pinctrl_codec2>;
reg = <0x18>;
#sound-dai-cells = <0>;
- HPVDD-supply = <®_3p3v>;
- SPRVDD-supply = <®_3p3v>;
- SPLVDD-supply = <®_3p3v>;
- AVDD-supply = <®_3p3v>;
- IOVDD-supply = <®_3p3v>;
+ HPVDD-supply = <®_gen_3p3>;
+ SPRVDD-supply = <®_gen_3p3>;
+ SPLVDD-supply = <®_gen_3p3>;
+ AVDD-supply = <®_gen_3p3>;
+ IOVDD-supply = <®_gen_3p3>;
DVDD-supply = <&vgen4_reg>;
reset-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 4dc8383478ee270c9ae4c3282b289d5513b36eed..a08a568c31d921e6ddb57e065e588d38dc2de998 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -45,8 +45,8 @@ pcie1_refclk: clock-pcie1-refclk {
reg_12p0_main: regulator-12p0-main {
compatible = "regulator-fixed";
regulator-name = "12V_MAIN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
regulator-always-on;
};
@@ -77,15 +77,6 @@ reg_gen_3p3: regulator-gen-3p3 {
regulator-always-on;
};
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- vin-supply = <®_3p3_main>;
- regulator-name = "GEN_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
reg_usdhc2_vmmc: regulator-vsd-3v3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2>;
@@ -415,11 +406,11 @@ codec1: codec@18 {
pinctrl-0 = <&pinctrl_codec1>;
reg = <0x18>;
#sound-dai-cells = <0>;
- HPVDD-supply = <®_3p3v>;
- SPRVDD-supply = <®_3p3v>;
- SPLVDD-supply = <®_3p3v>;
- AVDD-supply = <®_3p3v>;
- IOVDD-supply = <®_3p3v>;
+ HPVDD-supply = <®_gen_3p3>;
+ SPRVDD-supply = <®_gen_3p3>;
+ SPLVDD-supply = <®_gen_3p3>;
+ AVDD-supply = <®_gen_3p3>;
+ IOVDD-supply = <®_gen_3p3>;
DVDD-supply = <&vgen4_reg>;
reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index b2bcbf23eefda88e59ab0968cc8359c0cae526f1..ca59d1f711f8aee5b71e1ed7267d4f2e85563176 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -42,12 +42,12 @@ gic_its: msi-controller@1820000 {
};
};
- dmss: dmss {
+ dmss: bus@48000000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
dma-ranges;
- ranges;
+ ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
ti,sci-dev-id = <25>;
@@ -134,7 +134,7 @@ main_pktdma: dma-controller@485c0000 {
};
};
- dmsc: dmsc@44043000 {
+ dmsc: system-controller@44043000 {
compatible = "ti,k2g-sci";
ti,host-id = <12>;
mbox-names = "rx", "tx";
@@ -148,7 +148,7 @@ k3_pds: power-controller {
#power-domain-cells = <2>;
};
- k3_clks: clocks {
+ k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
@@ -373,8 +373,9 @@ main_spi4: spi@20140000 {
clocks = <&k3_clks 145 0>;
};
- main_gpio_intr: interrupt-controller0 {
+ main_gpio_intr: interrupt-controller@a00000 {
compatible = "ti,sci-intr";
+ reg = <0x00 0x00a00000 0x00 0x800>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
index 99e94dee1bd45812608f80cfbed7c87c8d725a01..deb19ae5e168ae0a8ea98c75f80dfeadb2900246 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -74,8 +74,9 @@ mcu_spi1: spi@4b10000 {
clocks = <&k3_clks 148 0>;
};
- mcu_gpio_intr: interrupt-controller1 {
+ mcu_gpio_intr: interrupt-controller@4210000 {
compatible = "ti,sci-intr";
+ reg = <0x00 0x04210000 0x00 0x200>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index cb340d1b401f3c7938eefc72a646a0b162c49396..6cd3131eb9ff94002662ed461681f28292906cf5 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -433,8 +433,9 @@ usb1_phy: phy@4110000 {
#phy-cells = <0>;
};
- intr_main_gpio: interrupt-controller0 {
+ intr_main_gpio: interrupt-controller@a00000 {
compatible = "ti,sci-intr";
+ reg = <0x0 0x00a00000 0x0 0x400>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
@@ -444,18 +445,19 @@ intr_main_gpio: interrupt-controller0 {
ti,interrupt-ranges = <0 392 32>;
};
- main-navss {
+ main_navss: bus@30800000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>;
dma-coherent;
dma-ranges;
ti,sci-dev-id = <118>;
- intr_main_navss: interrupt-controller1 {
+ intr_main_navss: interrupt-controller@310e0000 {
compatible = "ti,sci-intr";
+ reg = <0x0 0x310e0000 0x0 0x2000>;
ti,intr-trigger-type = <4>;
interrupt-controller;
interrupt-parent = <&gic500>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 0388c02c22037317e764e6a180a8bc9b64617d52..f5b8ef2f5f773ac9e7c0b2e4a6626d790a4639e2 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -116,11 +116,11 @@ adc {
};
};
- mcu-navss {
+ mcu_navss: bus@28380000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
dma-coherent;
dma-ranges;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index ed42f13e7663479bbeefeb87d5d3817fc40782c8..7cb864b4d74a83956dfbec008cf2642f052cb690 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -6,24 +6,24 @@
*/
&cbass_wakeup {
- dmsc: dmsc {
+ dmsc: system-controller@44083000 {
compatible = "ti,am654-sci";
ti,host-id = <12>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
mbox-names = "rx", "tx";
mboxes= <&secure_proxy_main 11>,
<&secure_proxy_main 13>;
+ reg-names = "debug_messages";
+ reg = <0x44083000 0x1000>;
+
k3_pds: power-controller {
compatible = "ti,sci-pm-domain";
#power-domain-cells = <2>;
};
- k3_clks: clocks {
+ k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
@@ -69,8 +69,9 @@ wkup_i2c0: i2c@42120000 {
power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
};
- intr_wkup_gpio: interrupt-controller2 {
+ intr_wkup_gpio: interrupt-controller@42200000 {
compatible = "ti,sci-intr";
+ reg = <0x42200000 0x200>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 9e87fb313a541c5d25b40539494de6f6dec02b13..eddb2ffb93ca69795e4ee407550d5f6bc6d0947b 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -85,12 +85,6 @@ sw6 {
gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
};
};
-
- clk_ov5640_fixed: clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- };
};
&wkup_pmx0 {
@@ -287,23 +281,6 @@ &main_i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
-
- ov5640: camera@3c {
- compatible = "ovti,ov5640";
- reg = <0x3c>;
-
- clocks = <&clk_ov5640_fixed>;
- clock-names = "xclk";
-
- port {
- csi2_cam0: endpoint {
- remote-endpoint = <&csi2_phy0>;
- clock-lanes = <0>;
- data-lanes = <1 2>;
- };
- };
- };
-
};
&main_i2c2 {
@@ -496,14 +473,6 @@ flash@0{
};
};
-&csi2_0 {
- csi2_phy0: endpoint {
- remote-endpoint = <&csi2_cam0>;
- clock-lanes = <0>;
- data-lanes = <1 2>;
- };
-};
-
&mcu_cpsw {
pinctrl-names = "default";
pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index f86c493a44f1cfa9f3f0b2e211b169943b818020..19fea8adbcff4254d8e207f49a5c07441bce976a 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -68,8 +68,9 @@ gic_its: msi-controller@1820000 {
};
};
- main_gpio_intr: interrupt-controller0 {
+ main_gpio_intr: interrupt-controller@a00000 {
compatible = "ti,sci-intr";
+ reg = <0x00 0x00a00000 0x00 0x800>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
@@ -85,9 +86,12 @@ main_navss: bus@30000000 {
#size-cells = <2>;
ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
ti,sci-dev-id = <199>;
+ dma-coherent;
+ dma-ranges;
- main_navss_intr: interrupt-controller1 {
+ main_navss_intr: interrupt-controller@310e0000 {
compatible = "ti,sci-intr";
+ reg = <0x00 0x310e0000 0x00 0x4000>;
ti,intr-trigger-type = <4>;
interrupt-controller;
interrupt-parent = <&gic500>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 5e74e43822c3f6ad250a2a2c960b81445ad7d04d..5663fe3ea46602d109423761622a36a8248ae14a 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -6,7 +6,7 @@
*/
&cbass_mcu_wakeup {
- dmsc: dmsc@44083000 {
+ dmsc: system-controller@44083000 {
compatible = "ti,k2g-sci";
ti,host-id = <12>;
@@ -23,7 +23,7 @@ k3_pds: power-controller {
#power-domain-cells = <2>;
};
- k3_clks: clocks {
+ k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
@@ -96,8 +96,9 @@ mcu_uart0: serial@40a00000 {
clock-names = "fclk";
};
- wkup_gpio_intr: interrupt-controller2 {
+ wkup_gpio_intr: interrupt-controller@42200000 {
compatible = "ti,sci-intr";
+ reg = <0x00 0x42200000 0x00 0x400>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index c2aa45a3ac795b57d842f0641cdc771fb81e94fc..3bcafe4c1742e82273420abc103bd0cdcd7c646f 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -76,8 +76,9 @@ gic_its: msi-controller@1820000 {
};
};
- main_gpio_intr: interrupt-controller0 {
+ main_gpio_intr: interrupt-controller@a00000 {
compatible = "ti,sci-intr";
+ reg = <0x00 0x00a00000 0x00 0x800>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
@@ -87,18 +88,19 @@ main_gpio_intr: interrupt-controller0 {
ti,interrupt-ranges = <8 392 56>;
};
- main-navss {
+ main_navss: bus@30000000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
dma-coherent;
dma-ranges;
ti,sci-dev-id = <199>;
- main_navss_intr: interrupt-controller1 {
+ main_navss_intr: interrupt-controller@310e0000 {
compatible = "ti,sci-intr";
+ reg = <0x0 0x310e0000 0x0 0x4000>;
ti,intr-trigger-type = <4>;
interrupt-controller;
interrupt-parent = <&gic500>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index d56e3475aee79e59396f1ed767470de43e9cbbcc..5e825e4d0306d168b09d7292e196f3608f55a353 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -6,7 +6,7 @@
*/
&cbass_mcu_wakeup {
- dmsc: dmsc@44083000 {
+ dmsc: system-controller@44083000 {
compatible = "ti,k2g-sci";
ti,host-id = <12>;
@@ -23,7 +23,7 @@ k3_pds: power-controller {
#power-domain-cells = <2>;
};
- k3_clks: clocks {
+ k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
@@ -96,8 +96,9 @@ mcu_uart0: serial@40a00000 {
clock-names = "fclk";
};
- wkup_gpio_intr: interrupt-controller2 {
+ wkup_gpio_intr: interrupt-controller@42200000 {
compatible = "ti,sci-intr";
+ reg = <0x00 0x42200000 0x00 0x400>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
@@ -249,11 +250,11 @@ adc {
};
};
- mcu-navss {
+ mcu_navss: bus@28380000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
dma-coherent;
dma-ranges;
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 5fae60f8c1355519c0c4825fae8888e4990f7ef0..38cb116ed433fb6c3ba64322e7b58c913fa80489 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1334,6 +1334,34 @@ static int __maybe_unused sysc_runtime_resume(struct device *dev)
return error;
}
+static int sysc_reinit_module(struct sysc *ddata, bool leave_enabled)
+{
+ struct device *dev = ddata->dev;
+ int error;
+
+ /* Disable target module if it is enabled */
+ if (ddata->enabled) {
+ error = sysc_runtime_suspend(dev);
+ if (error)
+ dev_warn(dev, "reinit suspend failed: %i\n", error);
+ }
+
+ /* Enable target module */
+ error = sysc_runtime_resume(dev);
+ if (error)
+ dev_warn(dev, "reinit resume failed: %i\n", error);
+
+ if (leave_enabled)
+ return error;
+
+ /* Disable target module if no leave_enabled was set */
+ error = sysc_runtime_suspend(dev);
+ if (error)
+ dev_warn(dev, "reinit suspend failed: %i\n", error);
+
+ return error;
+}
+
static int __maybe_unused sysc_noirq_suspend(struct device *dev)
{
struct sysc *ddata;
@@ -1344,12 +1372,18 @@ static int __maybe_unused sysc_noirq_suspend(struct device *dev)
(SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_NO_IDLE))
return 0;
- return pm_runtime_force_suspend(dev);
+ if (!ddata->enabled)
+ return 0;
+
+ ddata->needs_resume = 1;
+
+ return sysc_runtime_suspend(dev);
}
static int __maybe_unused sysc_noirq_resume(struct device *dev)
{
struct sysc *ddata;
+ int error = 0;
ddata = dev_get_drvdata(dev);
@@ -1357,7 +1391,19 @@ static int __maybe_unused sysc_noirq_resume(struct device *dev)
(SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_NO_IDLE))
return 0;
- return pm_runtime_force_resume(dev);
+ if (ddata->cfg.quirks & SYSC_QUIRK_REINIT_ON_RESUME) {
+ error = sysc_reinit_module(ddata, ddata->needs_resume);
+ if (error)
+ dev_warn(dev, "noirq_resume failed: %i\n", error);
+ } else if (ddata->needs_resume) {
+ error = sysc_runtime_resume(dev);
+ if (error)
+ dev_warn(dev, "noirq_resume failed: %i\n", error);
+ }
+
+ ddata->needs_resume = 0;
+
+ return error;
}
static const struct dev_pm_ops sysc_pm_ops = {
@@ -1408,9 +1454,9 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
/* Uarts on omap4 and later */
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff,
- SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
+ SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff,
- SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
+ SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
/* Quirks that need to be set based on the module address */
SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff,
@@ -1459,6 +1505,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
SYSC_QUIRK("tptc", 0, 0, -ENODEV, -ENODEV, 0x40007c00, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
+ SYSC_QUIRK("sata", 0, 0xfc, 0x1100, -ENODEV, 0x5e412000, 0xffffffff,
+ SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, 0x14, 0x50700100, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, -ENODEV, 0x50700101, 0xffffffff,
@@ -1466,7 +1514,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("usb_otg_hs", 0, 0x400, 0x404, 0x408, 0x00000050,
0xffffffff, SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
SYSC_QUIRK("usb_otg_hs", 0, 0, 0x10, -ENODEV, 0x4ea2080d, 0xffffffff,
- SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
+ SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY |
+ SYSC_QUIRK_REINIT_ON_RESUME),
SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0,
SYSC_MODULE_QUIRK_WDT),
/* PRUSS on am3, am4 and am5 */
@@ -1524,7 +1573,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x40000400, 0xffffffff, 0),
SYSC_QUIRK("rfbi", 0x4832a800, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
SYSC_QUIRK("rfbi", 0x58002000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
- SYSC_QUIRK("sata", 0, 0xfc, 0x1100, -ENODEV, 0x5e412000, 0xffffffff, 0),
SYSC_QUIRK("scm", 0, 0, 0x10, -ENODEV, 0x40000900, 0xffffffff, 0),
SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4e8b0100, 0xffffffff, 0),
SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4f000100, 0xffffffff, 0),
diff --git a/drivers/soc/amlogic/meson-clk-measure.c b/drivers/soc/amlogic/meson-clk-measure.c
index e1957476a0068baccce205b5f0459fee489c25ec..6dd190270123fa32f17b6b995359de85c708f822 100644
--- a/drivers/soc/amlogic/meson-clk-measure.c
+++ b/drivers/soc/amlogic/meson-clk-measure.c
@@ -626,10 +626,8 @@ static int meson_msr_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base)) {
- dev_err(&pdev->dev, "io resource mapping failed\n");
+ if (IS_ERR(base))
return PTR_ERR(base);
- }
priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
&meson_clk_msr_regmap_config);
diff --git a/drivers/tee/optee/call.c b/drivers/tee/optee/call.c
index 6132cc8d014c08512b487a31041844f65dbd6830..6e6eb836e9b62c8a1d4ebe4548641a898c282055 100644
--- a/drivers/tee/optee/call.c
+++ b/drivers/tee/optee/call.c
@@ -220,6 +220,7 @@ int optee_open_session(struct tee_context *ctx,
struct optee_msg_arg *msg_arg;
phys_addr_t msg_parg;
struct optee_session *sess = NULL;
+ uuid_t client_uuid;
/* +2 for the meta parameters added below */
shm = get_msg_arg(ctx, arg->num_params + 2, &msg_arg, &msg_parg);
@@ -240,10 +241,11 @@ int optee_open_session(struct tee_context *ctx,
memcpy(&msg_arg->params[0].u.value, arg->uuid, sizeof(arg->uuid));
msg_arg->params[1].u.value.c = arg->clnt_login;
- rc = tee_session_calc_client_uuid((uuid_t *)&msg_arg->params[1].u.value,
- arg->clnt_login, arg->clnt_uuid);
+ rc = tee_session_calc_client_uuid(&client_uuid, arg->clnt_login,
+ arg->clnt_uuid);
if (rc)
goto out;
+ export_uuid(msg_arg->params[1].u.octets, &client_uuid);
rc = optee_to_msg_param(msg_arg->params + 2, arg->num_params, param);
if (rc)
diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h
index 81ff593ac4ec22ff9ac6fb735fa5eec1e79ee7c1..e3d72d09c4848c6dfecb9945e297abf6e25d956a 100644
--- a/drivers/tee/optee/optee_msg.h
+++ b/drivers/tee/optee/optee_msg.h
@@ -9,7 +9,7 @@
#include <linux/types.h>
/*
- * This file defines the OP-TEE message protocol used to communicate
+ * This file defines the OP-TEE message protocol (ABI) used to communicate
* with an instance of OP-TEE running in secure world.
*
* This file is divided into two sections.
@@ -144,9 +144,10 @@ struct optee_msg_param_value {
* @tmem: parameter by temporary memory reference
* @rmem: parameter by registered memory reference
* @value: parameter by opaque value
+ * @octets: parameter by octet string
*
* @attr & OPTEE_MSG_ATTR_TYPE_MASK indicates if tmem, rmem or value is used in
- * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value,
+ * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value or octets,
* OPTEE_MSG_ATTR_TYPE_TMEM_* indicates @tmem and
* OPTEE_MSG_ATTR_TYPE_RMEM_* indicates @rmem,
* OPTEE_MSG_ATTR_TYPE_NONE indicates that none of the members are used.
@@ -157,6 +158,7 @@ struct optee_msg_param {
struct optee_msg_param_tmem tmem;
struct optee_msg_param_rmem rmem;
struct optee_msg_param_value value;
+ u8 octets[24];
} u;
};
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
index fafc1beea504ab7f79228f92ff1e6f8fcbd98e94..9837fb011f2fb0ce9ffc43cbfcac8392f7f22f7f 100644
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -50,6 +50,7 @@ struct sysc_regbits {
s8 emufree_shift;
};
+#define SYSC_QUIRK_REINIT_ON_RESUME BIT(27)
#define SYSC_QUIRK_GPMC_DEBUG BIT(26)
#define SYSC_MODULE_QUIRK_ENA_RESETDONE BIT(25)
#define SYSC_MODULE_QUIRK_PRUSS BIT(24)