diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index ab995a9c606caf889d793eb1e6b53384994a919d..65e7b5b85d832a2799f5511a75ae82117dce1449 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -599,7 +599,7 @@ static struct clk i2c_ick = {
static struct omap_clk omap_clks[] = {
/* non-ULPD clocks */
CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX),
- CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310 | CK_7XX),
/* CK_GEN1 clocks */
CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX),
CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX),
@@ -627,7 +627,7 @@ static struct omap_clk omap_clks[] = {
CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX),
CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
- CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310),
CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX),
CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX),
@@ -658,6 +658,10 @@ static struct omap_clk omap_clks[] = {
CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX),
CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX),
+ CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX),
+ CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX),
CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX),
CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310),
@@ -674,7 +678,7 @@ static struct omap_clk omap_clks[] = {
* init
*/
-static struct clk_functions omap1_clk_functions __initdata = {
+static struct clk_functions omap1_clk_functions = {
.clk_enable = omap1_clk_enable,
.clk_disable = omap1_clk_disable,
.clk_round_rate = omap1_clk_round_rate,
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 23ded2d49600d8eb316179365b53322674e40af3..a2d07aa75c9e98e5b53951e158a0aca5f12b12ae 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/spi/spi.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
@@ -23,6 +24,7 @@
#include <plat/mux.h>
#include <mach/gpio.h>
#include <plat/mmc.h>
+#include <plat/omap7xx.h>
/*-------------------------------------------------------------------------*/
@@ -196,6 +198,38 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
/*-------------------------------------------------------------------------*/
+/* OMAP7xx SPI support */
+#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
+
+struct platform_device omap_spi1 = {
+ .name = "omap1_spi100k",
+ .id = 1,
+};
+
+struct platform_device omap_spi2 = {
+ .name = "omap1_spi100k",
+ .id = 2,
+};
+
+static void omap_init_spi100k(void)
+{
+ omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
+ if (omap_spi1.dev.platform_data)
+ platform_device_register(&omap_spi1);
+
+ omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
+ if (omap_spi2.dev.platform_data)
+ platform_device_register(&omap_spi2);
+}
+
+#else
+static inline void omap_init_spi100k(void)
+{
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
#if defined(CONFIG_OMAP_STI)
#define OMAP1_STI_BASE 0xfffea000
@@ -263,6 +297,7 @@ static int __init omap1_init_devices(void)
omap_init_mbox();
omap_init_rtc();
+ omap_init_spi100k();
omap_init_sti();
return 0;
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 07212cc621ae27716c43b4bbf6a81f5ff9c990d5..84341377232db2ac2706cc5494b2aad7ab0ab34d 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -62,6 +62,14 @@ MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0)
/* I2C interface */
MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0)
MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0)
+
+/* SPI pins */
+MUX_CFG_7XX("SPI_7XX_1", 6, 5, 4, 4, 1, 0)
+MUX_CFG_7XX("SPI_7XX_2", 6, 9, 4, 8, 1, 0)
+MUX_CFG_7XX("SPI_7XX_3", 6, 13, 4, 12, 1, 0)
+MUX_CFG_7XX("SPI_7XX_4", 6, 17, 4, 16, 1, 0)
+MUX_CFG_7XX("SPI_7XX_5", 8, 25, 0, 24, 0, 0)
+MUX_CFG_7XX("SPI_7XX_6", 9, 5, 0, 4, 0, 0)
};
#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins)
#else
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 10eafa70a909de702361949de09f30069da8fd88..606bf04f51b60a9acdebd3d40aa8ad757868e2c5 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -80,6 +80,7 @@ config MACH_OVERO
config MACH_OMAP3EVM
bool "OMAP 3530 EVM board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP3517EVM
bool "OMAP3517/ AM3517 EVM board"
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 8dd277c36661dc39f0833151ce77218824599785..1e3dfb652acc08c22d3da12b5aa335c85ad51e89 100755
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -63,21 +63,21 @@ static int board_keymap[] = {
KEY(5, 1, KEY_H),
KEY(5, 2, KEY_J),
KEY(5, 3, KEY_F3),
+ KEY(5, 4, KEY_UNKNOWN),
KEY(5, 5, KEY_VOLUMEDOWN),
KEY(5, 6, KEY_M),
- KEY(5, 7, KEY_ENTER),
+ KEY(5, 7, KEY_RIGHT),
KEY(6, 0, KEY_Q),
KEY(6, 1, KEY_A),
KEY(6, 2, KEY_N),
KEY(6, 3, KEY_BACKSPACE),
KEY(6, 6, KEY_P),
- KEY(6, 7, KEY_SELECT),
+ KEY(6, 7, KEY_UP),
KEY(7, 0, KEY_PROG1), /*MACRO 1 <User defined> */
KEY(7, 1, KEY_PROG2), /*MACRO 2 <User defined> */
KEY(7, 2, KEY_PROG3), /*MACRO 3 <User defined> */
KEY(7, 3, KEY_PROG4), /*MACRO 4 <User defined> */
- KEY(7, 5, KEY_RIGHT),
- KEY(7, 6, KEY_UP),
+ KEY(7, 6, KEY_SELECT),
KEY(7, 7, KEY_DOWN)
};
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index d0e3fb7f92983fcbc41bedf0e9378b194aebb616..5420356eb40734128bf904ab9ac387e6b277f182 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -449,40 +449,78 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
#ifdef CONFIG_CPU_FREQ
/*
* Walk PRCM rate table and fillout cpufreq freq_table
+ * XXX This should be replaced by an OPP layer in the near future
*/
-static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
+static struct cpufreq_frequency_table *freq_table;
void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
- struct prcm_config *prcm;
+ const struct prcm_config *prcm;
+ long sys_ck_rate;
int i = 0;
+ int tbl_sz = 0;
+
+ sys_ck_rate = clk_get_rate(sclk);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
- if (prcm->xtal_speed != sys_ck.rate)
+ if (prcm->xtal_speed != sys_ck_rate)
continue;
/* don't put bypass rates in table */
if (prcm->dpll_speed == prcm->xtal_speed)
continue;
- freq_table[i].index = i;
- freq_table[i].frequency = prcm->mpu_speed / 1000;
- i++;
+ tbl_sz++;
}
- if (i == 0) {
- printk(KERN_WARNING "%s: failed to initialize frequency "
- "table\n", __func__);
+ /*
+ * XXX Ensure that we're doing what CPUFreq expects for this error
+ * case and the following one
+ */
+ if (tbl_sz == 0) {
+ pr_warning("%s: no matching entries in rate_table\n",
+ __func__);
+ return;
+ }
+
+ /* Include the CPUFREQ_TABLE_END terminator entry */
+ tbl_sz++;
+
+ freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
+ GFP_ATOMIC);
+ if (!freq_table) {
+ pr_err("%s: could not kzalloc frequency table\n", __func__);
return;
}
+ for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+ if (!(prcm->flags & cpu_mask))
+ continue;
+ if (prcm->xtal_speed != sys_ck_rate)
+ continue;
+
+ /* don't put bypass rates in table */
+ if (prcm->dpll_speed == prcm->xtal_speed)
+ continue;
+
+ freq_table[i].index = i;
+ freq_table[i].frequency = prcm->mpu_speed / 1000;
+ i++;
+ }
+
freq_table[i].index = i;
freq_table[i].frequency = CPUFREQ_TABLE_END;
*table = &freq_table[0];
}
+
+void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+ kfree(freq_table);
+}
+
#endif
struct clk_functions omap2_clk_functions = {
@@ -494,6 +532,7 @@ struct clk_functions omap2_clk_functions = {
.clk_disable_unused = omap2_clk_disable_unused,
#ifdef CONFIG_CPU_FREQ
.clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
+ .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table,
#endif
};
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index ded32364f32b0cfe270873252a4e4702409ed828..d4217b93e10befee1360785af72e277c9af203ab 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -34,7 +34,6 @@
#include <asm/div64.h>
#include <asm/clkdev.h>
-#include <plat/sdrc.h>
#include "clock.h"
#include "clock34xx.h"
#include "sdrc.h"
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
index 8bdcc9cc7f9af0e1b6d092374278fec743c23487..c6031d74d6f68bd5710d85e0c87c30f80c7cec47 100644
--- a/arch/arm/mach-omap2/clock34xx_data.c
+++ b/arch/arm/mach-omap2/clock34xx_data.c
@@ -776,6 +776,8 @@ static struct clk dpll4_m5_ck = {
.clksel_mask = OMAP3430_CLKSEL_CAM_MASK,
.clksel = div16_dpll4_clksel,
.clkdm_name = "dpll4_clkdm",
+ .set_rate = &omap2_clksel_set_rate,
+ .round_rate = &omap2_clksel_round_rate,
.recalc = &omap2_clksel_recalc,
};
@@ -1500,6 +1502,7 @@ static struct clk uart2_fck = {
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_UART2_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1509,6 +1512,7 @@ static struct clk uart1_fck = {
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_UART1_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -2745,7 +2749,7 @@ static struct clk mcbsp4_ick = {
};
static const struct clksel mcbsp_234_clksel[] = {
- { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+ { .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates },
{ .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates },
{ .parent = NULL }
};
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 1a45ed1e8ba1096e33e8b3dd5a3d1432a3547149..dd285f00146715177d1a51593f3097fd7218c901 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -559,7 +559,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
* downstream clocks for debugging purposes?
*/
- if (!clkdm || !clk)
+ if (!clkdm || !clk || !clkdm->clktrctrl_mask)
return -EINVAL;
if (atomic_inc_return(&clkdm->usecount) > 1)
@@ -610,7 +610,7 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
* downstream clocks for debugging purposes?
*/
- if (!clkdm || !clk)
+ if (!clkdm || !clk || !clkdm->clktrctrl_mask)
return -EINVAL;
#ifdef DEBUG
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index a8749e8017b95974102cf620ca596f6463163961..5a7996402c53c793ccddbf85636ee84d28ac3e9b 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -33,7 +33,6 @@
#include <plat/sdrc.h>
#include <plat/gpmc.h>
#include <plat/serial.h>
-#include <plat/mux.h>
#include <plat/vram.h>
#include "clock.h"
@@ -73,21 +72,21 @@ static struct map_desc omap24xx_io_desc[] __initdata = {
#ifdef CONFIG_ARCH_OMAP2420
static struct map_desc omap242x_io_desc[] __initdata = {
{
- .virtual = DSP_MEM_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS),
- .length = DSP_MEM_24XX_SIZE,
+ .virtual = DSP_MEM_2420_VIRT,
+ .pfn = __phys_to_pfn(DSP_MEM_2420_PHYS),
+ .length = DSP_MEM_2420_SIZE,
.type = MT_DEVICE
},
{
- .virtual = DSP_IPI_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS),
- .length = DSP_IPI_24XX_SIZE,
+ .virtual = DSP_IPI_2420_VIRT,
+ .pfn = __phys_to_pfn(DSP_IPI_2420_PHYS),
+ .length = DSP_IPI_2420_SIZE,
.type = MT_DEVICE
},
{
- .virtual = DSP_MMU_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS),
- .length = DSP_MMU_24XX_SIZE,
+ .virtual = DSP_MMU_2420_VIRT,
+ .pfn = __phys_to_pfn(DSP_MMU_2420_PHYS),
+ .length = DSP_MMU_2420_SIZE,
.type = MT_DEVICE
},
};
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index e071b3fd1878681d377037bb97880617721c0c76..459ef23ab8a818539aaa0da0464d5cf9e7af49bd 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -994,8 +994,10 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
}
#ifdef CONFIG_OMAP_MUX
- omap_mux_package_fixup(package_subset, superset);
- omap_mux_package_init_balls(package_balls, superset);
+ if (package_subset)
+ omap_mux_package_fixup(package_subset, superset);
+ if (package_balls)
+ omap_mux_package_init_balls(package_balls, superset);
omap_mux_set_cmdline_signals();
omap_mux_set_board_signals(board_mux);
#endif
diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c
index 126a9396b3a8e9c8b39609c71e136c15a2aa2756..e6dda694fd5ca6e960bd8e7e4cd8294b27185509 100644
--- a/arch/arm/mach-omap2/opp2420_data.c
+++ b/arch/arm/mach-omap2/opp2420_data.c
@@ -9,45 +9,47 @@
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
+ * these combinations is via the 'ratios' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
+ * setting. All configurations can be described by a DPLL setting and a ratio.
*
* XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810)
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
*
* This is technically part of the OMAP2xxx clock code.
+ *
+ * Considerable work is still needed to fully support dynamic frequency
+ * changes on OMAP2xxx-series chips. Readers interested in such a
+ * project are encouraged to review the Maemo Diablo RX-34 and RX-44
+ * kernel source at:
+ * http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
*/
#include "opp2xxx.h"
#include "sdrc.h"
#include "clock.h"
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
+ * Filling in table based on H4 boards available. There are quite a
+ * few more rate combinations which could be defined.
*
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used. Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set. The exception is the bypass setting which is
- * availble for low power bypass.
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used. Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set. The exception is the bypass
+ * setting which is available for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
+ **/
const struct prcm_config omap2420_rate_table[] = {
/* PRCM I - FAST */
{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
index edb81672c8446f3a334986d1604985e48b37c50f..1b9596ae201ef5f05fa3cf6ab003abd5f82f17c4 100644
--- a/arch/arm/mach-omap2/opp2430_data.c
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -1,5 +1,5 @@
/*
- * opp2420_data.c - old-style "OPP" table for OMAP2420
+ * opp2430_data.c - old-style "OPP" table for OMAP2430
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2009 Nokia Corporation
@@ -9,16 +9,16 @@
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
+ * these combinations is via the 'ratios' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ * setting. All configurations can be described by a DPLL setting and a ratio.
*
* 2430 differs from 2420 in that there are no more phase synchronizers used.
* They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
* 2430 (iva2.1, NOdsp, mdm)
*
* XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets.
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
@@ -30,24 +30,24 @@
#include "sdrc.h"
#include "clock.h"
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
+ * Filling in table based on 2430-SDPs variants available. There are
+ * quite a few more rate combinations which could be defined.
*
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used. Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set. The exception is the bypass setting which is
- * availble for low power bypass.
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used. Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set. The exception is the bypass
+ * setting which is available for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
+ */
const struct prcm_config omap2430_rate_table[] = {
/* PRCM #4 - ratio2 (ES2.1) - FAST */
{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 81ed252a0f8aeb4f4811858d0f9d39b76e1cc464..c6cc809afb790fa5a0624f5a3e2f118c4aba3fa3 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -124,8 +124,8 @@ static void omap3_core_save_context(void)
control_padconf_off |= START_PADCONF_SAVE;
omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF);
/* wait for the save to complete */
- while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
- & PADCONF_SAVE_DONE)
+ while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
+ & PADCONF_SAVE_DONE))
;
/* Save the Interrupt controller context */
omap_intc_save_context();
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 19805a7de06c7f5e9858c664b5164b86df10b508..8c964bec8159771099e4958c4cd6d96e618a99b1 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -125,6 +125,13 @@ static struct plat_serial8250_port serial_platform_data3[] = {
}
};
#endif
+static inline unsigned int __serial_read_reg(struct uart_port *up,
+ int offset)
+{
+ offset <<= up->regshift;
+ return (unsigned int)__raw_readb(up->membase + offset);
+}
+
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
int offset)
{
@@ -583,11 +590,12 @@ static unsigned int serial_in_override(struct uart_port *up, int offset)
{
if (UART_RX == offset) {
unsigned int lsr;
- lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR);
+ lsr = __serial_read_reg(up, UART_LSR);
if (!(lsr & UART_LSR_DR))
return -EPERM;
}
- return serial_read_reg(omap_uart[up->line].p, offset);
+
+ return __serial_read_reg(up, offset);
}
void __init omap_serial_early_init(void)
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 89cafc9372496d2d33989be36f2ea38b657d0949..d9f8c844c385fa18f7b92aa88431296df9f75140 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -36,10 +36,6 @@ static struct clk_functions *arch_clock;
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
-/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since
- * clock framework is not up , it is defined here to avoid rework in
- * every driver. Also dummy prcm reset function is added */
-
int clk_enable(struct clk *clk)
{
unsigned long flags;
@@ -305,7 +301,6 @@ void clk_enable_init_clocks(void)
clk_enable(clkp);
}
}
-EXPORT_SYMBOL(clk_enable_init_clocks);
/*
* Low level helpers
@@ -334,7 +329,16 @@ void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
arch_clock->clk_init_cpufreq_table(table);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
-EXPORT_SYMBOL(clk_init_cpufreq_table);
+
+void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (arch_clock->clk_exit_cpufreq_table)
+ arch_clock->clk_exit_cpufreq_table(table);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+}
#endif
/*-------------------------------------------------------------------------*/
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index f8ddbdd8b076e9ae5b830aab3a5615b8fc1fc7ea..6d3d3336005600a301dc78220b91b2bfd37ce17b 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -134,6 +134,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
static int omap_cpu_exit(struct cpufreq_policy *policy)
{
+ clk_exit_cpufreq_table(&freq_table);
clk_put(mpu_clk);
return 0;
}
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 04846811d0aaf83696e2b6c641785d902af7f1c5..d17620c50c286a9a7aa5f3e80a05872042acdd79 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -192,6 +192,7 @@ struct gpio_bank {
u32 saved_risingdetect;
#endif
u32 level_mask;
+ u32 toggle_mask;
spinlock_t lock;
struct gpio_chip chip;
struct clk *dbck;
@@ -749,6 +750,44 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
}
#endif
+/*
+ * This only applies to chips that can't do both rising and falling edge
+ * detection at once. For all other chips, this function is a noop.
+ */
+static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
+{
+ void __iomem *reg = bank->base;
+ u32 l = 0;
+
+ switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_GPIO_INT_EDGE;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_INT_CONTROL;
+ break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ case METHOD_GPIO_7XX:
+ reg += OMAP7XX_GPIO_INT_CONTROL;
+ break;
+#endif
+ default:
+ return;
+ }
+
+ l = __raw_readl(reg);
+ if ((l >> gpio) & 1)
+ l &= ~(1 << gpio);
+ else
+ l |= 1 << gpio;
+
+ __raw_writel(l, reg);
+}
+
static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
{
void __iomem *reg = bank->base;
@@ -759,6 +798,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
@@ -771,6 +812,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
@@ -803,6 +846,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
case METHOD_GPIO_7XX:
reg += OMAP7XX_GPIO_INT_CONTROL;
l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
+ bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
else if (trigger & IRQ_TYPE_EDGE_FALLING)
@@ -1072,7 +1117,7 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena
*/
static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
{
- unsigned long flags;
+ unsigned long uninitialized_var(flags);
switch (bank->method) {
#ifdef CONFIG_ARCH_OMAP16XX
@@ -1217,7 +1262,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
{
void __iomem *isr_reg = NULL;
u32 isr;
- unsigned int gpio_irq;
+ unsigned int gpio_irq, gpio_index;
struct gpio_bank *bank;
u32 retrigger = 0;
int unmasked = 0;
@@ -1284,9 +1329,23 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
gpio_irq = bank->virtual_irq_start;
for (; isr != 0; isr >>= 1, gpio_irq++) {
+ gpio_index = get_gpio_index(irq_to_gpio(gpio_irq));
+
if (!(isr & 1))
continue;
+#ifdef CONFIG_ARCH_OMAP1
+ /*
+ * Some chips can't respond to both rising and falling
+ * at the same time. If this irq was requested with
+ * both flags, we need to flip the ICR data for the IRQ
+ * to respond to the IRQ for the opposite direction.
+ * This will be indicated in the bank toggle_mask.
+ */
+ if (bank->toggle_mask & (1 << gpio_index))
+ _toggle_gpio_edge_triggering(bank, gpio_index);
+#endif
+
generic_handle_irq(gpio_irq);
}
}
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index 376ce18216ff8ee4ac613b9e2dff5bf285995bc6..5cd622039da0db81f4a7b1275449ddd11f830bb1 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -99,7 +99,6 @@ struct fb_info;
struct omap_backlight_config {
int default_intensity;
int (*set_power)(struct device *dev, int state);
- int (*check_fb)(struct fb_info *fb);
};
struct omap_fbmem_config {
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 309b6d1dccdba8670ae0b63a8de4b13d7ea92053..94fe2a0ce40a8502f6cf2a2006717300d1818163 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -119,6 +119,7 @@ struct clk_functions {
void (*clk_disable_unused)(struct clk *clk);
#ifdef CONFIG_CPU_FREQ
void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+ void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **);
#endif
};
@@ -135,6 +136,7 @@ extern unsigned long followparent_recalc(struct clk *clk);
extern void clk_enable_init_clocks(void);
#ifdef CONFIG_CPU_FREQ
extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
+extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
#endif
extern const struct clkops clkops_null;
diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h
index 2ae884378638659d211af495a9ce513245ca82e1..a745d62fad0d3782efe7d06ab271635d48f00f26 100644
--- a/arch/arm/plat-omap/include/plat/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -147,7 +147,7 @@
#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
#define OMAP343X_CONTROL_DEBOBS(i) (OMAP2_CONTROL_GENERAL + 0x01B0 \
- + ((i) >> 1) * 4 + (!(i) & 1) * 2)
+ + ((i) >> 1) * 4 + (!((i) & 1)) * 2)
#define OMAP343X_CONTROL_PROG_IO0 (OMAP2_CONTROL_GENERAL + 0x01D4)
#define OMAP343X_CONTROL_PROG_IO1 (OMAP2_CONTROL_GENERAL + 0x01D8)
#define OMAP343X_CONTROL_DSS_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E0)
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index 7e5319f907d1298dc247ddc3ce9ffd919bf274e4..a3e7b471bcba93e2b25119a4b04bfc2af5e44f7c 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -122,16 +122,21 @@
#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP243X_SMS_SIZE SZ_1M
-/* DSP */
-#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */
-#define DSP_MEM_24XX_VIRT 0xe0000000
-#define DSP_MEM_24XX_SIZE 0x28000
-#define DSP_IPI_24XX_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */
-#define DSP_IPI_24XX_VIRT 0xe1000000
-#define DSP_IPI_24XX_SIZE SZ_4K
-#define DSP_MMU_24XX_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */
-#define DSP_MMU_24XX_VIRT 0xe2000000
-#define DSP_MMU_24XX_SIZE SZ_4K
+/* 2420 IVA */
+#define DSP_MEM_2420_PHYS OMAP2420_DSP_MEM_BASE
+ /* 0x58000000 --> 0xfc100000 */
+#define DSP_MEM_2420_VIRT 0xfc100000
+#define DSP_MEM_2420_SIZE 0x28000
+#define DSP_IPI_2420_PHYS OMAP2420_DSP_IPI_BASE
+ /* 0x59000000 --> 0xfc128000 */
+#define DSP_IPI_2420_VIRT 0xfc128000
+#define DSP_IPI_2420_SIZE SZ_4K
+#define DSP_MMU_2420_PHYS OMAP2420_DSP_MMU_BASE
+ /* 0x5a000000 --> 0xfc129000 */
+#define DSP_MMU_2420_VIRT 0xfc129000
+#define DSP_MMU_2420_SIZE SZ_4K
+
+/* 2430 IVA2.1 - currently unmapped */
/*
* ----------------------------------------------------------------------------
@@ -182,16 +187,7 @@
#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP343X_SDRC_SIZE SZ_1M
-/* DSP */
-#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */
-#define DSP_MEM_34XX_VIRT 0xe0000000
-#define DSP_MEM_34XX_SIZE 0x28000
-#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */
-#define DSP_IPI_34XX_VIRT 0xe1000000
-#define DSP_IPI_34XX_SIZE SZ_4K
-#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */
-#define DSP_MMU_34XX_VIRT 0xe2000000
-#define DSP_MMU_34XX_SIZE SZ_4K
+/* 3430 IVA - currently unmapped */
/*
* ----------------------------------------------------------------------------
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index 8f069cc803504dc5a45263635c4ad4f5e1dc93c1..692c90e89ac3376d14eba9614ce3dc0a82b2b91e 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -183,6 +183,14 @@ enum omap7xx_index {
/* I2C */
I2C_7XX_SCL,
I2C_7XX_SDA,
+
+ /* SPI */
+ SPI_7XX_1,
+ SPI_7XX_2,
+ SPI_7XX_3,
+ SPI_7XX_4,
+ SPI_7XX_5,
+ SPI_7XX_6,
};
enum omap1xxx_index {
diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h
index 53f52414b0e979f512ff48ccd571d4e3fda62289..48e4757e1e301cc0558e2a965b2c9ba801d28a0d 100644
--- a/arch/arm/plat-omap/include/plat/omap7xx.h
+++ b/arch/arm/plat-omap/include/plat/omap7xx.h
@@ -46,6 +46,9 @@
#define OMAP7XX_DSPREG_SIZE SZ_128K
#define OMAP7XX_DSPREG_START 0xE1000000
+#define OMAP7XX_SPI1_BASE 0xfffc0800
+#define OMAP7XX_SPI2_BASE 0xfffc1000
+
/*
* ----------------------------------------------------------------------------
* OMAP7XX specific configuration registers
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index 11f5d7961c731d0b6fc69da3c357eb6cd3304153..0cfd54f519c4012eb0eb6fe518bf19ce0d3ebf42 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -66,12 +66,12 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
}
if (cpu_is_omap2420()) {
- if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE))
- return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT);
- if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE))
- return XLATE(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE);
- if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE))
- return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT);
+ if (BETWEEN(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_SIZE))
+ return XLATE(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_VIRT);
+ if (BETWEEN(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE))
+ return XLATE(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE);
+ if (BETWEEN(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_SIZE))
+ return XLATE(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_VIRT);
}
if (cpu_is_omap2430()) {
if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index c0ff1e39d8934d443db9780e7cdf9e6c75ae7bff..463d6386aff21172413e96ff0ed3ba0885821c15 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -827,7 +827,7 @@ EXPORT_SYMBOL_GPL(iommu_get);
**/
void iommu_put(struct iommu *obj)
{
- if (!obj && IS_ERR(obj))
+ if (!obj || IS_ERR(obj))
return;
mutex_lock(&obj->iommu_lock);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 2cc1cc328bac1e477851c3705acfe98fb98dfa2b..f75767278fc3d0c245e599ec62a54477344e71a5 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -436,7 +436,7 @@ int omap_mcbsp_request(unsigned int id)
dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
"for McBSP%d\n", mcbsp->tx_irq,
mcbsp->id);
- return err;
+ goto error;
}
init_completion(&mcbsp->rx_irq_completion);
@@ -446,12 +446,26 @@ int omap_mcbsp_request(unsigned int id)
dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
"for McBSP%d\n", mcbsp->rx_irq,
mcbsp->id);
- free_irq(mcbsp->tx_irq, (void *)mcbsp);
- return err;
+ goto tx_irq;
}
}
return 0;
+tx_irq:
+ free_irq(mcbsp->tx_irq, (void *)mcbsp);
+error:
+ if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
+ mcbsp->pdata->ops->free(id);
+
+ /* Do procedure specific to omap34xx arch, if applicable */
+ omap34xx_mcbsp_free(mcbsp);
+
+ clk_disable(mcbsp->fclk);
+ clk_disable(mcbsp->iclk);
+
+ mcbsp->free = 1;
+
+ return err;
}
EXPORT_SYMBOL(omap_mcbsp_request);
diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
index 409ca9643528b6d52a0906afdd97b3cbcf158a9b..a3a7f893817516aacbfa0da8e4aecf727c671932 100644
--- a/drivers/video/backlight/omap1_bl.c
+++ b/drivers/video/backlight/omap1_bl.c
@@ -139,8 +139,6 @@ static int omapbl_probe(struct platform_device *pdev)
if (!pdata)
return -ENXIO;
- omapbl_ops.check_fb = pdata->check_fb;
-
bl = kzalloc(sizeof(struct omap_backlight), GFP_KERNEL);
if (unlikely(!bl))
return -ENOMEM;