diff --git a/MAINTAINERS b/MAINTAINERS
index fdc0119963e70f12c4f9e1eae3a613447e7d8781..53cc13c82cb1d74646c310e78d01a3509841a669 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3388,7 +3388,7 @@ M: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
L: linux-i2c@vger.kernel.org
W: http://i2c.wiki.kernel.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
-T: git git://git.fluff.org/bjdooks/linux.git
+T: git git://git.pengutronix.de/git/wsa/linux.git
S: Maintained
F: Documentation/i2c/
F: drivers/i2c/
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 73133b1063f012416d2a957f3fc2432ace395439..6f5f98d69af7c26b2fd7b895106e11745ce7d155 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -476,17 +476,17 @@ static int pca_init(struct i2c_adapter *adap)
/* To avoid integer overflow, use clock/100 for calculations */
clock = pca_clock(pca_data) / 100;
- if (pca_data->i2c_clock > 10000) {
+ if (pca_data->i2c_clock > 1000000) {
mode = I2C_PCA_MODE_TURBO;
min_tlow = 14;
min_thi = 5;
raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
- } else if (pca_data->i2c_clock > 4000) {
+ } else if (pca_data->i2c_clock > 400000) {
mode = I2C_PCA_MODE_FASTP;
min_tlow = 17;
min_thi = 9;
raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
- } else if (pca_data->i2c_clock > 1000) {
+ } else if (pca_data->i2c_clock > 100000) {
mode = I2C_PCA_MODE_FAST;
min_tlow = 44;
min_thi = 20;
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 088c5c1ed17dfe831c4345ee8f02dd0ef4e1c82d..51f05b8520edb3f95b983d5002859afd386586e4 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -365,10 +365,6 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
struct device_node *node = dev->of_node;
int ret;
- if (!node)
- return -EINVAL;
-
- i2c->speed = &mxs_i2c_95kHz_config;
ret = of_property_read_u32(node, "clock-frequency", &speed);
if (ret)
dev_warn(dev, "No I2C speed selected, using 100kHz\n");
@@ -419,10 +415,13 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev)
return err;
i2c->dev = dev;
+ i2c->speed = &mxs_i2c_95kHz_config;
- err = mxs_i2c_get_ofdata(i2c);
- if (err)
- return err;
+ if (dev->of_node) {
+ err = mxs_i2c_get_ofdata(i2c);
+ if (err)
+ return err;
+ }
platform_set_drvdata(pdev, i2c);
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 5d54416770b01e7816cc85cd7dcbf403bf407442..8488bddfe46596109249edd242a3ad0ebc7cfe8b 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -48,8 +48,9 @@ enum {
mcntrl_afie = 0x00000002,
mcntrl_naie = 0x00000004,
mcntrl_drmie = 0x00000008,
- mcntrl_daie = 0x00000020,
- mcntrl_rffie = 0x00000040,
+ mcntrl_drsie = 0x00000010,
+ mcntrl_rffie = 0x00000020,
+ mcntrl_daie = 0x00000040,
mcntrl_tffie = 0x00000080,
mcntrl_reset = 0x00000100,
mcntrl_cdbmode = 0x00000400,
@@ -290,31 +291,37 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
* or we didn't 'ask' for it yet.
*/
if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
- dev_dbg(&alg_data->adapter.dev,
- "%s(): Write dummy data to fill Rx-fifo...\n",
- __func__);
+ /* 'Asking' is done asynchronously, e.g. dummy TX of several
+ * bytes is done before the first actual RX arrives in FIFO.
+ * Therefore, ordered bytes (via TX) are counted separately.
+ */
+ if (alg_data->mif.order) {
+ dev_dbg(&alg_data->adapter.dev,
+ "%s(): Write dummy data to fill Rx-fifo...\n",
+ __func__);
- if (alg_data->mif.len == 1) {
- /* Last byte, do not acknowledge next rcv. */
- val |= stop_bit;
+ if (alg_data->mif.order == 1) {
+ /* Last byte, do not acknowledge next rcv. */
+ val |= stop_bit;
+
+ /*
+ * Enable interrupt RFDAIE (data in Rx fifo),
+ * and disable DRMIE (need data for Tx)
+ */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl |= mcntrl_rffie | mcntrl_daie;
+ ctl &= ~mcntrl_drmie;
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+ }
/*
- * Enable interrupt RFDAIE (data in Rx fifo),
- * and disable DRMIE (need data for Tx)
+ * Now we'll 'ask' for data:
+ * For each byte we want to receive, we must
+ * write a (dummy) byte to the Tx-FIFO.
*/
- ctl = ioread32(I2C_REG_CTL(alg_data));
- ctl |= mcntrl_rffie | mcntrl_daie;
- ctl &= ~mcntrl_drmie;
- iowrite32(ctl, I2C_REG_CTL(alg_data));
+ iowrite32(val, I2C_REG_TX(alg_data));
+ alg_data->mif.order--;
}
-
- /*
- * Now we'll 'ask' for data:
- * For each byte we want to receive, we must
- * write a (dummy) byte to the Tx-FIFO.
- */
- iowrite32(val, I2C_REG_TX(alg_data));
-
return 0;
}
@@ -514,6 +521,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
alg_data->mif.buf = pmsg->buf;
alg_data->mif.len = pmsg->len;
+ alg_data->mif.order = pmsg->len;
alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
I2C_SMBUS_READ : I2C_SMBUS_WRITE;
alg_data->mif.ret = 0;
@@ -566,6 +574,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
/* Cleanup to be sure... */
alg_data->mif.buf = NULL;
alg_data->mif.len = 0;
+ alg_data->mif.order = 0;
dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h
index 1bc74afe7a35c7ea248510874910525d0206c9c3..49ed17fdf0556436cd626e52e0a9cd9809bc610a 100644
--- a/include/linux/i2c-pnx.h
+++ b/include/linux/i2c-pnx.h
@@ -22,6 +22,7 @@ struct i2c_pnx_mif {
struct timer_list timer; /* Timeout */
u8 * buf; /* Data buffer */
int len; /* Length of data buffer */
+ int order; /* RX Bytes to order via TX */
};
struct i2c_pnx_algo_data {